• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.614-620
• /
• 2009

A fuel tank of a vehicle is an important part due to its flammable contents ant its importance during crash conditions. Therefore, the fuel tank's design should be assessed for durability and robustness to ensure safety during the early development phase. Previously, evaluation for the durability was done by testing in physical driving conditions which could only be done after the completion of the vehicle. Computation simulation is a more effective method to evaluate the strength and durability of the fuel tank during the early stage. In this paper, two outstanding computational simulation methods are studied. One evaluates PV cycle fatigue due to build up pressure in the fuel tank and the other evaluates the PSD vibration fatigue from modal characteristics. The results show that computational methods agree with physical tests and are thus suitable to analyze the strength and durability of the fuel tank at early development phase.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.7-14
• /
• 2012

CFRP composite material has the superior specific strength and rigidity compared to metallic materials, and is widely adopted in the various fields. However, CFRP composite material has the weakness in hygrothermal and crash environment. Especially, moisture ingress into composite material under hygrothermal environment can change molecule arrangement and chemical properties. In addition, interface characteristics and material component properties can be degraded. A collapse experiment has been made to research the differences of absorbed energy and deformation mode between absorbed specimens of moisture and non-moisture. As a result of this study, the effect of moisture absorption and impact loads of about 30~50% reduction in strength are shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.406-411
• /
• 2003

This paper deals with the effect of laser material processing on the EMU production technique. Material processing with lasers takes advantage of all the characteristics of laser light. The high energy density and directionality achieved with lasers permits strong localized heat- or photo-treatment of materials with spatial resolution below one micrometer. The pulsed and mono-chromatic light allows the control of depth of heat treatment or selective excitation. The laser beam can be moved to process large areas, is a sterile tool and is no subject to wear and tear. Using laser processing have taken more interests in EMU production for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.473-478
• /
• 2003

The hydraulic buffer stop placed on the end of the railway brakes the train could not reduce the velocity sufficiently because of the braking system troubles or driver's mistakes. The hydraulic buffer stop is composed of 2 operating parts; hydraulic buffers and rail clamps. Hydraulic buffers brake trains non-destructively in low speed, otherwise rail clamps begin to work in higher speed. In this paper, The braking process of the hydraulic buffer stop is investigated by numerical methods. The hydraulic buffer is numerically analyzed and designed to absorb the kinematic energy of the train below 3.2km/h speed. The hydraulic buffer stop crushed by the train with 5km/h speed is analyzed by FEM package-PAM CRASH in order to obtain the stress profile in rail clamps and buffer stop frame.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1602-1606
• /
• 2008

In the Rail Safety Regulations article 16, deceleration rate in the survival spaces should be limited as far as is practicable to 5g, and shall not be more than 7.5g. As it is impractical to evaluate complete train behaviour by testing, the achievement of the objectives shall be validated by dynamic simulations corresponding to the reference collisions scenarios. But initial design and evaluation procedure, impact dynamics model which classified 1D and 2D is more useful than full scale model. This paper presents acceleration response characteristics between 1D and 2D dynamics model under head-on collision in standard collision scenarios.

• 한국레이저가공학회지
• /
• 제13권4호
• /
• pp.1-6
• /
• 2010

Recently the use of ultra high strength steels (UHSS) in structural and safety component is rapidly increasing in the automotive industry. For example, 1.5GPa grade hot stamping with die-quenching of boron steel 22MnB5 could apply crash-resistant parts such as bumpers and pillars. The development of laser welding process of hot stamping steels, fundamental bead-on-plate welding and lap joint welding test were carried out using 3kW Nd:YAG laser. Local hardening & HAZ softening occurred in hot stamping steel as a result of metallurgical change caused by the welding heat input in the Nd:YAG laser welding process. The size of soft zones in the hot stamping steel was related to the welding heat input, being smaller at high speeds which generated a smaller heat input. Also in the case of lap joint design structure, same welded characteristics were shown. The HAZ softening degree was controlled to ensure the joint strength.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.216-233
• /
• 2002

Due to the environmental problems of fuel consumption and vehicle emission, etc., automotive makers are trying to reduce the weight of vehicles. The most effective way to reduce a vehicle weight is to use lighter materials, such as aluminum and plastics. Aluminum Intensive Vehicle(AIV) has many advantages in the aspects of weight reduction, body stiffness and model change. So, most of automotive manufacturers are attempting to develop AIV using Aluminum Space Frame(ASF). The weight of AIV can be generally reduced to about 30% than that of conventional steel vehicle without the loss of impact energy absorbing capability. And the body stiffness of AIV is higher than that of conventional steel monocoque body. In this study, Aluminum Intensive Vehicle is developed and analyzed on the basis of steel monocoque body. The energy absorbing characteristics of aluminum extrusion components are investigated from the test and simulation results. The crush and crash characteristics of AIV based on the FMVSS 208 regulations are evaluated in comparison with steel monocoque. Using these results, the design concepts of the effective energy absorbing members and the design guide line to improve crashworthiness for AIV are suggested.

• 한국융합학회논문지
• /
• 제2권3호
• /
• pp.1-6
• /
• 2011

대표적인 경량금속 중의 하나인 알루미늄 폼재의 연구동향을 기계적인 측면에서 고찰하여 보았다. 특히 기공(pore)을 가진 알루미늄재료는 난연성, 감쇠특성, 에너지흡수 성능 등 여러 측면에서 기존의 폴리머 폼재보다 우수한 기계적 성능을 가지고 있고, 더욱이 재활용이 가능하다는 면에서 환경보호에 관심이 집중되고 있는 현 시점에서 연구가 활발히 진행되고 있다. 폼재의 일반적 특성, 에너지 흡수 및 소음흡수 특성에 대해 살펴보고 폼재가 적용된 사례들에 대한 분석을 통해 향후 폼재와 외곽 구조재의 접합문제 등에 대한 제언을 하였다.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.28-33
• /
• 2014

Vibro ripper worked by high frequency vibration is developed to do rock fragmentation and work of ripper is the different concept with other existing breakers. The gear box-shank welded joint of vibro ripper is very important part to deliver vibromotive force to tooth, so this part should endure high frequency vibration environments. The purposes of this study are to choose the optimal welding conditions for fatigue strength. The conditions were made using three kind of shank materials and two kind of filler metals. Shank materials are Hadox-hituf, Posten80 and AR400, and filler metals are CSF-71T and CSF-81T. The fatigue test was conducted each condition. Fracture surface was observed to estimate fracture characteristics of welded joint using SEM.