• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.721-733
• /
• 2017

When temporary spent fuel storage pools at nuclear power plants reach their capacity limit, the spent fuel must be moved to an alternative storage facility. However, radioactive materials must be handled and stored carefully to avoid severe consequences to the environment. In this study, the risks of three potential accident scenarios (i.e., maritime transportation, an aircraft crashing into an interim storage facility, and on-site transportation) associated with the spent fuel transportation process were analyzed using a probabilistic approach. For each scenario, the probabilities and the consequences were calculated separately to assess the risks: the probabilities were calculated using existing data and statistical models, and the consequences were calculated using computation models. Risk assessment software was developed to conveniently integrate the three scenarios. The risks were analyzed using the developed software according to the shipment route, building characteristics, and spent fuel handling environment. As a result of the risk analysis with varying accident conditions, transportation and storage strategies with relatively low risk were developed for regulators and licensees. The focus of this study was the risk assessment methodology; however, the applied model and input data have some uncertainties. Further research to reduce these uncertainties will improve the accuracy of this model.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.276-285
• /
• 2017

The research vessel NARA equipped with an azimuth thruster system was built in 2015. There are few vessels with this propulsion system in Korea. This vessel has two modes such as the normal for maneuvering and the power for investigation, and the other two modes as one axis and two axes on the operating. This type of vessels does not seem to have a clear grasp of the maneuvering character in comparison with the vessel with a conventional propulsion system. So the authors carried out the sea test for the turning, the zigzag and the inclination, and the results are as follows. In turning test, the case of using the two axes mode is much better than the case of using the one axis mode for the elements of turning, such as advance, transfer, tactical diameter and final diameter, but turning hard over the rudder in full speed is very vulnerable to capsize in both modes. In zigzag test, the yaw quicking responsibility index, T is very large excessively, which means a bad counter maneuvering ability, so an operator has to keep in mind that in turning operation. If necessary to avoid collision at head on situation, it may be a more effective method to use the crash astern stop than the turning according to the conditions and circumstances for the shortest stopping distance is very short.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.54-61
• /
• 2019

Recently, IITS (intelligent integrated transportation system) has been important topic in Smart City related industry. As a main objective of IITS, prevention of traffic jam (due to car accidents) has been attempted with help of advanced sensor and communication technologies. Studies show that car accident has certain correlation with some factors including characteristics of location, weather, driver's behavior, and time of day. We concentrate our study on observing auto correlativity of car accidents in terms of time of day. In this paper, we performed the ARIMA tests including ADF (augmented Dickey-Fuller) to check the three factors determining auto-regressive, stationarity, and lag order. Summary on forecasting of hourly car crash counts is presented, we show that the traffic accident data obtained in Korea can be applied to ARIMA model and present a result that traffic accidents in Korea have property of being recurrent daily basis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.93-101
• /
• 2022

It is essential to prevent LoC(Loss-of-Control) or upset situations caused by stall, icing or sensor malfunction in aircraft, because it may lead to the crash of the aircraft. With this regard, it is crucial to correctly identify the dynamic characteristics of aircraft in such upset conditions. In this paper, we present a SID(System IDentification) method utilizing the moving-window based least-square and the adaptive-order ZKF(Zonotopic Kalman Filter), which is more effective than the existing Kalman-filter based SID for the aircraft in upset condition at a high angle of attack with temporary sensor malfunction. The proposed method is then tested on real flight data and compared with the existing one.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.213-223
• /
• 2021

It is very important to build a safe walking environment for children because children are more likely to be exposed to traffic accidents than adults due to their behavioral and physical characteristics. Therefore, this study analyzed the characteristics of road and transportation safety facilities that affect pedestrian traffic accidents around school zones using spatial poisson regression. The pedestrian-vehicle crash data in Seoul 2016-2018 was provided by the Traffic Accident Analysis System(TAAS). The main analysis results are as follow; First, the more intersections and the higher percentage of neighborhood roads in the school zone, the higher the risk of pedestrian traffic accidents. Second, the pedestrian push button was found to reduce the occurrence of pedestrian traffic accidents. Third, except for the pedestrian push button, none of the transportation safety facilities considered in this study were effective in reducing the risk of pedestrian traffic accidents. On the other hand, if not only the improvement of physical facilities but also non-physical factors such traffic safety education are supported, the effect for reducing traffic pedestrian traffic accidents in the school zone is expected to be further maximized.

• Korean Institute of Interior Design Journal
• /
• v.19 no.4
• /
• pp.74-81
• /
• 2010

This study analyzed characteristics of visual circulation in the modern museum architecture while carrying out space syntax and visibility graph analysis side by side in order to solve problems of visitors' movement having been suggested as the point at issue at modern museum architecture that has become big scaled and layering so as to satisfy various social demands. Also, the result of this analysis is same as followings. First, visitors become to watch the exhibition with clear position that can make themselves in right allocation, and thus visual and perceptual confusions were shown as relatively low in case physical position and visual one were matched at major space of atrium type or mediation space. Second, it was appeared a lot at the museum having exhibition space of room type in case the physical position and visual one were not matched. Visual circulation in the exhibition space of room type has a merit of forming the circulation where free selection is possible. However, it have raised concerns that visual passageway of visitors could be in a stalemate or crash at the opening part, not at the exhibition hall. Third, though analysis of space syntax had a merit of analyzing total modern museum architectures having became compounded and big scaled, but it was dropped in reliability from the visual circulation's analysis that was decided by flows of space and time. In contrary, visibility graph analysis was shown as having a merit to analyzing the flows rather than that of total structure, and also appeared as being able to supplement the disadvantage of space syntax in methodology. Upon the above analysis, a lot of architectural elements such as allocation of exhibition hall, location of door and window etc. were appeared as affecting influences to forming visual circulation of visitors, not to mention of allocations of major space, mediation space, and exhibition one. Through this study, various possibilities of quantitative analysis on the visual circulation in the museum architectures can be confirmed. However, this study expects that in-depth subsequent researches objecting to various museums could be realized afterwards because there are still limitations in its analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.239-247
• /
• 2015

Recently, various research studies on frontal collision and rear-ender which occur more frequently compared to others are underway as the public interest on them is growing. This study analyzes scientifically the relationship between effective impact speed and injury incidence for vehicle crash accident reconstruction and presents a relevant model formula. Because real vehicle experiments have certain limitations such as possible injuries, this study efforts to collect and analyze as many materials as possible to substitute real vehicle experiments, including data from various collision tests and human experiments. As a result, this study present a threshold in which head-on collisions and rear impacts do not cause injuries under 7 km/h of effective impact speed, and suggests a model formula showing that injury extent is linearly proportional to effective impact speed through collision speed and amount of plastic deformation. In conclusion, a model formula for estimating effective impact speed and injury incidence newly proposed in this study is expected to be used as a minimum standard of judgment in disputes on the injury extent of passenger in head-on collisions and rear impacts. Furthermore its availability in terms of technological analysis in legal arguments is expected to be very high if this study will be enhanced by referring to scientific analyses of various real accidents so as to apply it in various types of collision accidents.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.50-62
• /
• 2014

The number of traffic accidents has been decreased since 2000; however, the downward trend of crash occurrence has been slower after 2006. A few decades ago, physical improvement projects such as alignment improvement and the installation of safety facilities were usually implemented to decrease the occurrence of traffic accidents, but the effects of physical improvement on safety have been gradually decreased. The main objective of this study is to identify how the drivers' characteristics affect and/or are related to traffic accidents. Most of previous works have focused on revealing the difference of the nature of the drivers between the drivers who have no experience and the drivers with experience of traffic accidents. This study tries to analyze the habitual accidents proneness through a survey of drivers' personalities for drivers who were involved in traffic accidents at least once. As a result, nine personality factors were found to be statistically significant: Neuroticism(N), Lie(L), Psychoticism* Neuroticism(PN), Psychoticism*Lie(PL), Extraversion*Lie(EL), Neuroticism*Lie(NL), Impulsiveness(IMP), Venturesomeness(VEN), Empathy(EMP). Among these factors, single character factors were found to increase accidents, whereas complex factors were found to decrease the occurrence of accidents.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.129-138
• /
• 2005

Until the early part of the 1990s, interior design has never been thought important by car makers. Repeated attempts have been made to systemize a technical structure, such as layout, driving method, and size, and the car's interior design has been developed by in simple comparison with the exterior design. In the 1990s, however, this trend began to change because consumers began spending more time in their cars, so the motive of the technology development became that of giving comfort and functional satisfaction to the customers. Observing how a person spends inside his or her car and considering the latest trends in car interiors have made a consumer-oriented sense of value i.e., intensifying the personality of the car's interior design and considering the emotional makeup of the consumer factor in the acquisition of a strategic brand identity. These days, car interiors assume a new concept every year due to the constant change in various factors, and the application of a high-tech design, with a sensing function and a navigation system, to achieve driverless running, is being raised as a key trend element technology for the future. Now, at the present when multilateral concept applications of design are attempted under the direct influences from other fields such as product design, fashion and furniture, I would like to lay stress on investigating and analysing the changes in car interior design varying with the background of the times and formative characteristics from the object point of view. On this study, I would like to compare the background of the times and flow of car interior design with priority given to crash pad and would like to attempt to present the direction of the future car interior design together with diversifying major technical factors.