• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.1-16
• /
• 2016

Model Order Reduction (MOR) denotes the theory by which one tries to catch a model of order lower than that of the real model. This is conveniently pursued in view of the design of an efficient structural control scheme, just passive within this paper. When the nonlinear response of the reference structural system affects the nature of the reduced model, making it dependent on the visited subset of the input-output space, standard MOR techniques do not apply. The mathematical theory offers some specific alternatives, which however involve a degree of sophistication unjustified in the presence of a few localized nonlinearities. This paper suggests applying standard MOR to the linear parts of the structural system, the interface remaining the original unreduced nonlinear components. A case study focused on the effects of a helicopter land crash is used to exemplify the proposal.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.41-51
• /
• 2014

Share of total accidents in construction accidents construction site accident 70% of small embroidery Reducing the rate of Construction of the entire construction accidents decreased overall is a very meaningful work. Disaster reduction continues to increase despite the efforts of a small construction site(Amount less than 2,000,000,000) for Disaster Reduction In order to identify more clearly the cause of the system and provide the urgently needed measures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.748-754
• /
• 2008

This paper studied on the application of Korean Railway Safety Law and Urban Transit Safety Law in Crashworthiness Regulations to the urban maglev vehicle of KIMM. The crashworthiness regulations for urban transit vehicle should be satisfied to the urban maglev vehicles according to crash analysis results using the explicit finite element method. However, according to its numerical results, the crashworthiness regulations of Korean Railway Safety Law were partially satisfied except the coupling and shunting condition. When a commercial urban maglev vehicle is developed in the near future, the crashworthiness regulations of Korean Railway Safety Law should be considered and satisfied during its structural design stage in some details

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.450-453
• /
• 2009

In order to overcome drawbacks of the advanced high strength steel such as inferior formability and large springback, the hot press forming process(HPF) has been being applied for forming of automotive sheet parts. Good formability and dimensional accuracy without springback as well as good crash performance of final products are the advantages of the HPF process. In this work, a method to characterize the mechanical properties of the HPF steel was developed based on the simple tension test at high temperatures and its finite element analysis, while it was applied to obtain strain rate and temperature dependent flow curves of the HPF steel. The final flow curves were represented by utilizing the Johnson-Cook type equation both in uniform and post-uniform deformation regions.

• 산업기술연구
• /
• 제20권B호
• /
• pp.131-138
• /
• 2000

In this paper, we would like to develop the bending collapse specific equation of aluminum members which are usually used in light-weight vehicle or electromobiles. The result of the developed equation are compared with that of test and finite element methods as the moment-rotational angle curves. Three types of aluminum members are tested with the pure bending collapse test rig. PAM-CRASH and ABAQUS program are used for finite element analysis. As the result the developed bending collapse governing equation is accurate in estimating the yield moment and the maximum moment. Especially, in the case of the local buckling and the delayed buckling, the developed equation is better effective than F.E.M.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1035-1040
• /
• 2004

In the proto design stage of a new car, the performance of an occupant protection system is often evaluated by CAE instead of the real test. CAE predicts and recommends the appropriate design values hence reducing the number of the real tests. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters, in which inconsistency between the actual test results and CAE exists. In this research, the optimization procedure of a protection system such as airbag and load limiter is suggested for the frontal collision. The DACE modeling known as Kriging interpolation is introduced to obtain the meta model of the system followed by the tabu search method to determine a global optimum. Finally, the distribution of a suggested design is determined through the Monte-Carlo Simulation.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.491-499
• /
• 2005

There are different types of vehicle impacts recorded every year, resulting in many injuries and fatalities. The severity of these impacts depends on the aggressivety and incompatibility of vehicle-to-roadside hardware impacts. The aim of this paper is to investigate and to enhance crashworthiness in the case of full barrier impact using a new idea of crash improvement. Two different types of smart structures have been proposed to support the function of the existing vehicle. The work carried out in this paper includes developing and analyzing mathematical models of vehicle-to-barrier impact for the two types of smart structures. It is proven from analytical analysis that the mathematical models can be used in an effective way to give a quick insight of real life crashes. Moreover, it is shown that these models are valid and flexible, and can be useful in optimization studies.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.435-455
• /
• 2012

An impact on the ground surface may represent several phenomena, such as a crash of an airplane or an explosion or the passage of a train. In order to analyze and design structures and equipment to resist such a type of shocks, the response spectra for an impact on the ground must be given. We investigated the half-space motions due to impact using the finite element method. We performed extensive parametric analyses to define a suitable finite element model and arrive at displacement time histories and response spectra at varying distances from the impact point. The principal scope of our study has been to derive response spectra which: (a) provide insight and illustrate in detail the half-space response to an impact load, (b) can be readily used for the analysis of structures resting on a ground subjected to an impact and (c) are a new family of results for the impact problem and can serve as reference for future research.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1602-1606
• /
• 2008

In the Rail Safety Regulations article 16, deceleration rate in the survival spaces should be limited as far as is practicable to 5g, and shall not be more than 7.5g. As it is impractical to evaluate complete train behaviour by testing, the achievement of the objectives shall be validated by dynamic simulations corresponding to the reference collisions scenarios. But initial design and evaluation procedure, impact dynamics model which classified 1D and 2D is more useful than full scale model. This paper presents acceleration response characteristics between 1D and 2D dynamics model under head-on collision in standard collision scenarios.

• 항공우주시스템공학회지
• /
• 제4권3호
• /
• pp.1-5
• /
• 2010

Understanding the crushing behaviour of aluminum honeycombs under dynamic loading is useful for crash simulations of vehicles and for design of impacting energy absorbers. In the study of honeycomb crushing under quasi-static, dynamic loading, the most important parameter is crush strength. Crush strength is indicated to energy absorption characteristic of aluminum honeycomb. In this study, Using Finite Element Analysis carried out crush strength of hexagonal aluminum honeycomb then the results was compared with Quasi-static test. Consequently, Crush strength is different in quasi-static loading and dynamic loading about 16%.