• IE interfaces
• /
• v.19 no.3
• /
• pp.214-224
• /
• 2006

The container handling times of automated transfer cranes(ATCs) significantly affect the productivity of container terminals. In this paper, evaluation models for the container handling times of ATCs are suggested for import container blocks with different transfer point configurations. Firstly, evaluation models for various motion times of stacking and retrieving operations of ATC are suggested for two basic alternatives of import container blocks. In addition, in considering the space allocation, evaluation methods for the container handling times of ATC are suggested. Finally, the container handling times for each case are compared with each other in order to analyze how the block shape and the transfer point locations affect the container handling times of ATC.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.107-114
• /
• 2009

In the recent large block are used to build the ship to improve productivity. For this reason, two or more floating cranes that are connected in parallel is the trend. Typically, when working with floating crane load safety factor is considered. Even in the parallel operation, load safety factor is calculated similar to working alone. For this reason, operations do not guarantee the reliability or excessive safety factor applied. Therefore, the subdivided cases for calculating the safety factor are defined when parallel connected floating cranes are operated. Based on those cases, the operation standard is made about procedure using parallel connected floating cranes. And to verify this, dynamics simulation was performed for verification using the dynamics simulation program.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.155-159
• /
• 2002

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, wire rope of crane is important component to container transfer. If it happens wire rope failures in operating, it may lead to safety accident, economic power loss by productivity decline, competitive power decline of container terminal and so on. To solve this problem, we developed wire rope fault detecting system as a portable instrument, and this system is consisted of 3 parts that fault detecting part using hall sensor, permanent magnets and analog unit, and digital signal processing part using data acquisition card, monitoring part using wavelet transform, denoising method. In this paper, a wire rope is scanned by this system after makes several broken parts on the surface of wire rope artificially. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data that was used filter. In practical applications of denoising, it is shown that wavelet pursue it with little information loss and smooth signal display. It is verified that the detecting system by denoising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension of wire ropes exchange period and could competitive power. Also, this system is possible to apply in several fields like that elevator, lift and so on.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.101-108
• /
• 2003

Construction of automated terminal it urgently demanded to gain the foundation of hub-port in north east Asia. Therefore we suggest an adequate operating system layout of automated terminal in Korea. In this paper the aim of automated terminal operating system is satisfied. four basic models are divided according to moving course of export and import cargo of each automated equipments, several input data are changed and analyzed dynamically by Trial and Error method, and then an optimized operating system model is selected, and designed for yard operating system layout on the basis of the selected model. Particularly, the productivity of automated port is up to the kind of automated equipments. However, because expense and present work process must be considered actually. In order to prevent confusion of the work, the method to optimize the present work and substitute prevent equipments and automated equipments was designed. It is a premise that ail the yard equipments described in this paper must be automatic except quay crane.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.296-303
• /
• 2002

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types or effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs)

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.155-162
• /
• 2014

In container terminals, stacking yard is the place where import and export containers are temporarily stored before being loaded onto or after being discharged from a ship. Since all the containers go through the stacking yard in their logistic flow, the productivity of the terminal critically depends on efficient operation of stacking yard, which again depends on how well the stacking locations of the incoming containers are determined. However, a good location for stacking an incoming container later can turn out to be a bad one when that container is to be fetched out of the stacking yard, especially if some rehandling is required. This means that good locations for the containers are changing over time. Therefore, in most container terminals, the so-called remarshaling is done to move the containers from bad location to good locations. Although there are many previous works on remarshaling, they all assume that the remarshaling can be done separately from the main jobs when the cranes are idle for rather a long period of time. However, in reality, cranes are hardly available for a period long enough for remarshaling. This paper proposes a crane dispatching strategy that allows remarshaling jobs to be mixed together with the main jobs whenever an opportunity is detected. Experimental results by simulation reveals that the proposed method effectively contributes to the improvement of terminal productivity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.63-70
• /
• 2002

The main subject to become a hub pen is automation The automated container terminal has already operated in advanced pons and it bas been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the moat optimal method of equipment operation in order to minimize loading time using each three types of effective AT operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real tine. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs).

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.69-74
• /
• 2012

Recent global supply chain, improving the efficiency of container shipping process is very important. In the overseas shipping of goods, the voyage of super containership is common to overcome amount of increasing cargo. Thus, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for maximizing the productivity of quay side. Yard Tractors(YTs) pooling methods also are introduced for increasing the efficiency of assignment of YTs. In this paper, we analyzed the efficiency of dual cycling through comparing existing pooling methods with the modified method for the dual cycling. We developed a simulation model using simulation analysis software, Arena. The result of experiment shown that the more dual cycling don't always increase the gross crane rate(GCR), which means productivity of quay cranes(QCs) per hour.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.227-234
• /
• 2020

One of the most important operational goals in container terminals is to maximize the quay side productivity by minimizing the turnaround times of the vessels, for which the operations of the quay cranes (QC) to load/unload containers onto/from the vessels should be conducted efficiently without delays. This paper suggests using a policy-based dispatching method for YTs (Yard Tractor) that deliver containers between QCs and the storage yard. The goal of using such a dispatching policy is to maximize the efficiency of the YT operation and accordingly to minimize the QC delays because of late arrivals of the YTs. In particular, in this paper, we modified the previously proposed policy for its application to real container terminal and verified the effect through simulation experiments using real terminal data.

• IE interfaces
• /
• v.17 no.2
• /
• pp.233-241
• /
• 2004

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types of effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and AGV)