• 한국세라믹학회지
• /
• 제12권2호
• /
• pp.26-30
• /
• 1975

The experiment has been carried out to clarify the condition of acid treatment for preventing the crack formation caused by swelling and shrinking during acid leaching process. The borosilicate glass contained phosphorous pentoxide was chosen as the sample, which is recognized to be more homogeneous in phase separation. The various effects, such as kind, cocentration and acid temperature, were investigated. The experimental results are summerized as follows. (1) Sulfuric acid is more stable than hydrochrolic acid for preventing the crack. (2) The optimum concentration of acid lies in the range of 0.1~0.3N. (3) Higher temperature of the acid to treat the separated glass was more stable than lower temperature. (4) The rate of crack decreased with the longer period and the higher temperature of the heat treatment.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1297-1304
• /
• 2000

The reflective photoelastic experiment can be used more effectively than the transparent type in industrial fields. Therefore the reflective photoelastic experimental hybrid method applied to the fatigue fracture problems is introduced in this research. It is verified that the reflective photoelastic experimental hybrid method is very useful on the determination of crack propagation velocity and stress intensity factor of the fatigue crack and on the separation of stress components in the vicinity of fatigue crack tip etc.

• Elastomers and Composites
• /
• 제32권3호
• /
• pp.179-185
• /
• 1997

In solution and melting state, SiOD prepolymer was prepared by cured excess DDM with epoxy-terminated siloxane oligomers to control phase separation when DGEBA was blended with PDMS. DGEBA/SiOD prepolymer was also cured at $150^{\circ}C$ for 3hrs. Mechanical and thermal properties of the cured prepolymer specimen were investigated. DGEBA/SiOD60 specimen blended SiOD prepolymer had the best flexural strength, modulus and impact strength. To show crack-formation procedure to morphology, DGEBA/DDM neat specimen was flowed homogeneously in direction of crack energy, whereas DGEBA/SiOD$(30{\sim}60)$ specimen showed heterogeneously dispersed particles and scattered domain of crack energy, but DGEBA/SiOT specimen showed homogeneous phase.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.67-72
• /
• 2000

Demand for now nondestructive evaluation are growing to detect fatigue crack growth behavior to predict long term performance of materials and structure in aggressive environments especially when they are In non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in fatigue and tensile test of high strength fire resistance steel for frame structure with time-frequency analysis methods. The main frequency range is different in the noise and the fatigue crack propagation. It could be classified that it were also generated by composite fracture mechanics of cleavage, dimple, inclusion separation etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.28-29
• /
• 2013

When concrete was hardened, it should had considered a crack to make internal stress by hydration heat. For control of crack, admixture was use to change cement because hydration heat was effect to cement. High strength mass concrete had much hydration heat with high volume of cement. It was necessary to reduce hydration heat in construction method. In this study, it evaluates hydration heat, compressive strength of transfer concrete girder regard to field construction type such as separation, whole etc. Also, we test compressive strength of concrete with core and mold specimen.

• 한국재료학회지
• /
• 제7권1호
• /
• pp.62-68
• /
• 1997

본 연구에서는 접초피로에 있어서 균열의 발생, 진전 등의 관찰을 위해, 균열의 발생, 진전 등이 2차원적으로 되어 시험편측면에서 관찰이 가능한 평판 ring형 시험편을 이용하여 반복수 증대에 따른 균열의 발생, 진전과정을 조사하였다. 그 결과 pitting, flaking형 파손의 초기손상은 접촉면하의 내부에 생기는 접촉면에 평행방향의 균열에 의해 일어나며, 이 균열은 그 방향 밀 파면형태에 의해 접촉응력이 접촉면에 평행방향의 전단응력성분에 의한 모드 ll 피로진전과의 차는 중첩부하된 압축응력의 유무라고 생각되며, 이 가저에 근거로 하여 재료고유의 모드 ll 피로균열진전특성을 구할 수 있는 장치를 개발하였다. 이 장치를 이용하여 알루미륨합금 및 공구강에 대한 da/dN-${\Delta}k$ ll 관계의 시험결과를 얻었다.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.265-270
• /
• 2006

복합재로 된 판재에 대하여 동적 균열이 접합면을 따라서 진행되어 가면서 찢어져 나갈 때 그 계면 주위에서의 응력 상태 및 변형, 견인응력 등을 조사하였다. 최대의 등가응력 및 소성 변형율은 접촉이 바로 떨어지는 부분에서 그리고 판 끝부분의 휘어지는 부근에서 최대의 변형량이 되었다. 견인력은 0.015mm정도로 그 면이 떨어졌을 때 최대치 75 MPa로서 되었다가 서서히 낮아지면서 0.13mm이상 떨어졌을 때는 0으로 일정하게 되었다. 이러한 연구 자료로서 정확한 파괴강도 해석과 안전설계 및 새로운 고급재료의 개발에 필요한 자료를 제공할 수 있는 기초적인 연구를 수행함이 본 연구의 목적이다.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.186-192
• /
• 2002

The fatigue crack propagation characteristics were investigated on dissimilar friction weld of two kind of heat-resisting steels (STR3 and STR35) commonly used in valve materials for vehicles. A small circular artificial defect was machined to induce fatigue crack at bonded line, heat affected zone and base metal of the weld on the surface of the specimens. From the results of the experiment, the fatigue limits of the materials STR3 and STR35 were obtained to be 429.0MPa and 409.4MPa respectably. The STR35 base metal and 1.0mm HAZ specimens showed 190% and 82% higher fatigue life than STR3 base metal. And the fatigue life of 1.0mm HAZ specimen was shown 99% on STR3 and 29% on STR35 higher than that of their base metal. But the fatigue life of weld interface specimen was shown 18% on STR3 and 72% on STR35 lower than that of their base metal because of the weld interface separation.

• Computers and Concrete
• /
• 제1권1호
• /
• pp.47-60
• /
• 2004

The influence of the fracture process zone (FPZ) on the fracture properties is one of the hottest topics in the field of fracture mechanics for cementitious materials. Within the FPZ in front of a traction free crack, cohesive forces are distributed in accordance with the softening stress-separation constitutive relation of the material. Therefore, further crack propagation necessitates energy dissipation, which is the work done by the cohesive forces. In this paper $g_f$, the local fracture energy characterizing the energy consumption due to the cohesive forces, is discussed. The computational expression of $g_f$ in the FPZ can be obtained for any stage during the material fracture process regarding the variation of FPZ, whether in terms of its length or width. $G_{fa}$, the average energy consumption along the crack extension region, has also been computed and discussed in this paper. The experimental results obtained from the wedge splitting tests on specimens with different initial notch ratios are employed to investigate the property of the local fracture energy $g_f$ and the average value $G_{fa}$ over the crack extension length. These results can be used to indicate the influence of the FPZ. Additionally, changes in the length of the FPZ during the fracture process are also studied.

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.436-444
• /
• 2010

The hot tear susceptibility of Al alloys was investigated by using a constrained-rod mold designed to quantify 8 types of tear tendency. The severity of the crack was scored by 5 grades on a scale of 0 to 4, with 0 being "no crack formed" and 4 being "complete separation by crack". The Hot Tear Susceptibility index (HTS) which consists of crack type scores and position scores, was proposed to compare the hot tear tendency of Al alloys. A356.0 cast alloy and AA6061 wrought Al alloy showed an HTS value of 27.5 and 53 respectively. The effects of Si, Cu, and Mg content on hot tear tendency were also investigated with a constrained-rod mold. The variation of HTS values with alloying elements represents similar behavior in the variation of the solidification range in a pseudo binary phase diagram.