• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1013-1019
• /
• 2016

CFRP는 탄소섬유를 기반으로 수지를 합침하여 제조된 복합소재로, 높은 비 강도와 경량성을 지녀 다양한 분야들에서 널리 사용되어지고 있다. 특히 일방향 탄소섬유는 적층 각도를 적용할 수 있으며 이때 적용된 적층 각도로 구성된 CFRP는 적층 각도가 없는 것보다 더 높은 강성을 가지고 있다. 본 논문에서는 적층 각도 변화에 따른 CFRP 소형 인장시험편의 크랙 전파와 파괴거동에 관한 것으로, 각 적층 각도에 따른 크랙 성장의 특성을 고찰한다. 적층 각도가 증가함에 따라 최대 응력 값이 작게 나타나고 크랙 전파가 더디게 나타나지만, 적층 각도 $60^{\circ}$를 기점으로 그 응력이 다시 증가되므로 서, 적층 각도에 따른 한계를 보이고 있다. 본 연구결과는 기계구조물의 CFRP사용에 있어 구조물내의 결함이 발생하였을 때의 피로파괴 가능성을 검증하는 자료로 사용될 수 있다고 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.487-492
• /
• 2007

The enhancement of the service life of damaged or cracked structures is a major issue for researchers and engineers. The hierarchical void element with the integrals of Legend polynomials is used to characterize the fracture behavior of unpatched crack as well as repaired crack with bonded composite patches by computing the stress intensity factors and stress contours at the crack tip. The numerical approach is based on the v-version degenerate shell element including the theory of anisotropic laminated composites. Since the equivalent single layer approach is adopted in this study, the proposed element is necessary to represent a discontinuous crack part as a continuum body with zero stiffness of materials. Thus the aspect ratio of this element to represent the crack should be extremely slender. The sensitivity of numerical solution with respect to energy release rate, displacement and stress has been tested to show the robustness of hierarchical void element as the aspect ratio is increased up to 2000. The stiffness derivative method and displacement extrapolation method have been applied to calculate the stress intensity factors of Mode I problem.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1257-1265
• /
• 1998

Hertzian contact tests were used to investigate the evolution of fracturedamage in the coating layer as functions of contact load and coating thickness by studying crack patterns in porcelain on glass-infiltrated alumina bilayer system conceived to simulate the crown structure of a tooth. Cone cracks initiated at the coating top surface without delamination at interface and crack propagation to substrate. Preferentially the cracks made multi-cracks at the coating top surface rather than proceeding to interface. The cracks were highly stabilized with wide ranges between the loads to initiate first cracking and to cause final failure im-plying damage-tolerant capability. Finite element modelling was used to evaluate the stress distribution. Maximum tensile stress were responsible for the cracking at the coating layer and had a profound influence on the crack pattern and fracture damage in the layered structure materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.698-701
• /
• 2007

A top emission organic light emitting diode comprising of a triple anode on polycarbonate $film/TNATA/NPB/Alq_3:C545T/cathodes$ has been fabricated. The triple layer structure of Cr/Al/Cr allowed for fabrication of a crack-free anode and provided better higher work function than ITO anode.The anode showed compatibility with flexible plastic substrate and no crack was formed during bending test while ITO anode showed crack.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.707-710
• /
• 2004

This paper reported the results of mock-up test on mass concrete for transfer girder using setting time difference of super retarding agent(SRA). According to test results, two mock-up structures were made. Plain concrete without placing layer reached maximum temperature after 24hours since placement and caused surface hydration cracks at top section. However, concrete with placing layer reached maximum temperature after 72hours and surface temperature was higher than center temperature, which did not cause surface crack. After form removing, no crack was observed at side surface of plain concrete, while concrete using SRA at mid section had surface scaling and settling crack. According to coring results, concrete with placing layer had a penetration crack from top section to bottom section. Therefore, the setting time difference method to reduce hydration heat will have difficulty in applying the mass concrete for transfer girder.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권1호
• /
• pp.112-117
• /
• 2016

최근 인공지반녹화가 주변 생활공간의 쾌적화, 에너지 절약효과, 도시 미관의 환경개선 등의 장점을 갖고 있어 콘크리트 위에 녹화 공간 조성이 증가하고 있다. 이에 따라 건축공사 표준 시방서, 건축물 녹화 설계기준 등에서는 방수층의 수밀안정성 확보를 위해 일정 품질 이상의 방근층 설치를 규정하고 있으나, 실제 우리나라의 많은 현장은 방수층 위에 누름콘크리트 타설 후 인공녹화를 시행하고 있는 실정이다. 이에 본 연구에서는 방근층을 시공하지 않은 현장을 대상으로 지표를 설정하였으며, 누름콘크리트의 균열에 따른 식물의 뿌리가 균열부로 침입 및 관통하여 누름콘크리트 하단부의 아스팔트 방수시트에 미치는 영향을 평가하였다.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.484-489
• /
• 2002

테이프 캐스팅된 알루미나/지르코니아 또는 뮬라이트/지르코니아를 표면층으로 알루미나/지르콘(소결시 반응결합 뮬라이트/지르코니아 유도)을 내부층으로 적층하고 고온가압소결함으로써 층상 복합체를 제조하였다. 소결체에서 다양한 형태의 균열을 관찰 할 수 있었으며, 이는 주로 표면층으로의 횡단균열(channel crack, 계면에 수직방향으로 전파되는 균열), 중간층 내에서의 종단균열(transverse crack, 계면에 거의 평행한 방향으로 전파되는 균열)과 증간사이를 분리시키는 계면균열(interface crack, 계면을 따라 전파되는 균열)들로 구성되어 있었다. 이러한 균열들은 층을 이루는 복합산화물간의 열팽창계수의 차이에 의해 형성된 것으로 여겨졌다. 특히, 표면층을 뮬라이트/지르코니아로 적층하였을 경우 층간 계면에 평행한 균열과 중간층 내로의 종단균열이 생성되었으나, 알루미나/지르코니아로 하였을 경우는 이러한 균열이 확인되지 않았다. 한편, 압흔하중에 의한 적층체의 잔류응력 역시 표면층의 종류에 따라서 상이한 양상을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.322-327
• /
• 2000

This paper investigates the time-dependent crack growth in X20CrMoV 12 1 steel weld joints. Crack growth test are carried out $545^{\circ}C$ on side-grooved 1/2T CT specimens under static loads. A simulated material is produced for the intercritical HAZ, where fracture normally occurs. Constitutive properties are obtained for the simulated HAZ material as well as for the base metal and weld metal. Finite element analyses of crack growth are performed on the models with and without a HAZ layer, using the experimental crack length-time history. The inclusion of HAZ layer increase the load line velocities significantly. The crack growth rates are correlated reasonably well with $C^*$. The smallest crack size for the validity of $C^*$ is found much smaller than the ASTM crack initiation size for 1T CT specimen of creep ductile materials.

• 연구논문집
• /
• 통권31호
• /
• pp.127-133
• /
• 2001

In chromium electrodeposition, crack is inevitably accompanied by chromium layer. Behavior of crack formation and crack density were different from the plating conditions such as current density, temperature, waveform of applied current and so on. And cracks have an influence on the corrosion resistance of chromium deposit, because corrosion occurs through the network of cracks between deposit and substrate. Therefore, many researches have been achieved in order to remove the cracks in chromium deposit. Formation of double layers, Cr/Cr and Ni/Cr were investigated to increase corrosion resistance of chromium deposit in this study. As pretreatment prior to outer chromium coating, acid pickling and current control method were examined. Cracks in cross-section of each sample were observed with SEM and CASS(Copper modified acetic acid salt spray) test was performed to evaluate corrosion resistance. It was found that corrosion resistance of Cr/Cr and Ni/Cr double layers were superior to Cr or Ni single layer from the results of CASS test.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.95-103
• /
• 2001

The buckling of an orthotropic layer bonded to an orthotropic half-space with an interface crack subjected to compressive load under plane strain is analyzed. General solution to the stability equations describing the buckling behavior of both the layer and the half-space is expressed in terms of displacement functions. The displacement functions are represented by the solution of Cauchy-type singular integral equations, which are numerically solved. Numerical results of the critical buckling loads are presented fur various geometric parameters and material properties of both the layer and half-space.