• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.102-109
• /
• 2002

The fatigue crack growth under mixed mode condition has been discussed within the scope of linear fracture mechanics such as maximum tangential stress, maximum tangential principal stress and minimum strain energy density. The purpose of this study is to investigate the characteristics of fatigue test crack growth in 304 stainless steel under mixed node. The fatigue test results carried out by using inclined pre-crack specimens was compared to both of the theoretical predictions of the criteria, maximum tangential stress and stain energy density. As difference from theoretical analysis, the transition region from mixed mode to mode I appeared in the fatigue test. There is deep relationship between the angle of slanted pre-crack and transition. Therefore, as applying the different stress intensity factor to each node I+II and mode I, the directions and rates of fatigue crack growth are evaluated more accurately under mixed mode.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1458-1467
• /
• 1992

본 연구에서는 균질재에서의 결과를 토대로 이종재에서도 그 성질이 보존될 것으로 기대되기 때문에 계면균열에서의 CED의 기본적 성질을 검토한후, 각 모드 인자 의 분리법과 평가법을 CED를 통해 제시한다. 또 제시한 수법을 이용하여 우선 탄성 균열 모델에서 유한요소해석을 통해 CED 및 각 모드 인자의 평가 및 기초적 검토를 실시하여 그 유효성을 확인한다.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.15-19
• /
• 2000

The exact estimation of the ductile crack growth in a thin sheet would be needed in part of the commercial transport aircraft industry fields. A 2-dimensional elastic plastic finite element analysis was carried out to simulate a stable crack extension in a thin sheet 2024 aluminium alloy. Two kinds of crack modeling were used to evaluate curves of the stable crack extension. And then CTOA(crack tip opening angle) and CTED(crack tip energy density) were calculated in order to determine whether they can be used as useful crack extension criterions in a thin sheet. Results indicate that stable crack extension behaviors were simulated well and CTED is more admirable even though CTOA also is reasonable as a criterion for a stable crack extension in a thin 2024 aluminium alloy sheet.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1051-1061
• /
• 2011

밀도의 변화가 직교이방성 함수구배재료에서 전파하는 모드 III 균열선단부근의 응력 및 변위장에 미치는 영향에 대하여 연구하였다. 본 연구에서 균열은 물성치의 구배방향과 수직하여 전파하며 다음과 같은 3가지 종류의 함수구배재료에서 밀도변화가 균열선단의 응력장 및 변위장에 미치는 영향에 대하여 연구하였다. (1) 탄성변화 없이 밀도만 변화하는 경우 (2) 밀도의 변화방향과 탄성변화방향이 서로 반대인 경우 (3) 밀도의 변화방향과 탄성변화방향이 동일한 경우이다. 이와 같은 경우에 대한 연구를 위하여 균열의 응력장 및 변위장이 개발되었으며 또한 전파하는 균열에 대한 동적응력확대계수에 대하여도 연구하였다. 균열전파속도가 느린 경우에는 밀도의 변화가 균열선단부근의 응력 및 변위장에 미치는 영향은 미미하나 균열전파속도가 빠른 경우에는 그 영향은 매우 크다.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.640-648
• /
• 2004

This paper describes a new magnetization method for non-destructive testing with magneto-optical sensor (denoted as MO sensor) which have the following characteristic : high observation sensitivity, independence of the crack orientation, and precise imaging of a complex crack geometry such as multiple cracks. When a magnetic field is applied normally to the surface of a specimen which is significantly larger than its defects, approximately the same magnetic charge per unit area occurs on the surface of the specimen. If there is a crack in the specimen, magnetic charge per unit area has the same value at the bottom of the crack. The distribution of the vertical component of the magnetic flux density, B$\_$Z/, is almost uniform over the no-crack area (denoted as B$\_$Z,BASE/), while the magnetic flux density is smaller in the surroundings of the crack(denoted as B$\_$Z,CRACK/) If B$\_$Z, BASE/ is a bit larger than the saturated magnetic flux density of the MO sensor (B$\_$s/) , then small magnetic domains occur over the crack area and a large domain over the non-crack area because B$\_$Z,CRACK/ is smaller than B$\_$s/.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.45-50
• /
• 2015

In many cases, the field fracture mechanism of the thermoplastic pipe is considered as either brittle or environmental fractures. Thus the estimation of the lifetime by modeling slow crack growth considering such fracture mechanisms is required. In comparison of the some conventional and empirical equations to explain the slow crack growth rate such as the Paris' law, the crack layer theory can be used to simulate the crack and process zone growth behaviors precisely, so the lifetime of thermoplastic pipe can also be accurately estimated. In this study, the modified crack layer theory for the stress corrosion cracking (SCC) of high density polyethylene is introduced with detailed algorithm. The oxidation induction time of the HDPE is also considered for the reduction of specific fracture energy during exposed to chemical environments. Furthermore, the parametric study for an important SCC parameter is conducted to understand the slow crack growth behavior of SCC.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.971-980
• /
• 1997

This study is to investigate the stiffness degradation of a composite laminated panel including transverse matrix cracks subjected to bending and twisting moments. Micromechanics theory on the composite material is derived by introducing crack density. Iterative numerical scheme is developed to calculate the degraded composite stiffness which has nonlinear relation due to the crack density. The finite element method is used for structural analysis of the composite panel. Structural responses of the composite panel are examined for various laminated angles and crack density under the bending and twisting moments. Also, the effect of crack opening and closing is considered in the examination. It is realized that the matrix cracks may cause severe stiffness reduction and should be considered in the composite laminated panel.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.414-422
• /
• 1997

The characteristics on the extension of the CED(Crack Energy Density) concept to the interface kinked crack problems in a dissimilar are examined. Each mode contributions of CED are found by symmetric and antisymmetric conponents and domain independent integrals. Finite element calculation is carried out to simulate the interface kinked crack growth on a bimaterial. The focus is the establishment of fracture criterion with CED and finding the orientation of crack extension. From the results, a prediction about the extension behavior of an interface kinked crack can be done. And we show that CED can be a parameter to indicate fracture criterion at an interface kinked crack.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.203-206
• /
• 2002

The present study proposes a theoretical model for predicting the matrix crack density growth of each layer in composite laminates subjected to thermo-mechanical loads. Each layer with matrix cracks is treated as an equivalent continuum of degraded elastic stiffnesses which are functions of the matrix crack density in each slyer. The energy release rate as a function of the degraded elastic stiffnesses is then calculated for each layer as functions of thermo-mechanical loads externally applied to the laminate. The matrix crack densities of each layer in general laminates are predicted as functions of the thermo-mechanical loads applied to a number of laminates. Comparisons of the present study with experimental data in the open literatures are also provided.

• 터널과지하공간
• /
• 제9권4호
• /
• pp.364-372
• /
• 1999

우리나라의 대표적인 암석의 하나인 화강암에 대하여 내부결합에 의한 역학적 특성을 고찰하였다. 조사선(scanline)을 이용하여 암석 내에 존재하는 불연속면의 간격과 길이를 펑가하였다. 화강암에 잠재적으로 존재하는 미소균열의 선택적 배향성과 분포성상을 관찰하기 위해서 암석시펀을 Rift, Grain및 Hardway축의 3방향으로 구분하여 각각의 박편을 제작하여 균열밀도와 균열길이를 정량적으로 평가하였다. 그 결과 균열은 결의 세 방향에 대하여 직교하는 경향이었다. 균열 밀도는 방향에 따라 달랐으나 길이는 큰 영향이 없었다.