• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 추계학술발표 개요집
• /
• pp.214-217
• /
• 1995

In order to investigate characteristics of surface fatigue crack propagation from a pit shaped surface defect which frequently exists near weld joints, SS400 steel with thickness of 12mm, which generally used for structure members, was submerged-arc welded with butt type and machined for both surface. The weld joints were devided into 5 regions, weld metal, boundary between heat affected zone (HAZ), HAZ, boundary between HAZ and base metal, and base metal. Specimens from each region were machined for a pit shaped initial surface defect with aspect ratio of 2. characteristics of surface fatigue crack por pagation from the defect under the same loading condition were compared and discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.155-160
• /
• 2001

This paper describes a probabilistic fracture mechanics (PFM) analysis based on Monte Carlo (MC) simulation. In the analysis of CANDU pressure tube, it is necessary to perform the PFM analyses based on statistical consideration of flaw generation time. A depth and an aspect ratio of initial semi-elliptical surface crack, a fracture toughness value, delayed hydride cracking (DHC) velocity, and flaw generation time are assumed to be probabilistic variables. In all the analyses, degradation of fracture toughness due to neutron irradiation is considered. Also, the failure criteria considered are plastic collapse, unstable fracture and crack penetration. For the crack growth by DHC, the failure probability was evaluated in due consideration of flaw generation time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.441-446
• /
• 2001

In the integral type reactor, SMART, all the major components such as steam generators, pressurizer and pumps are located inside the single reactor pressure vessel. The objective of this study is to evaluate the structural integrity for RPV of SMART under the postulated pressurized thermal shock by applying the finite element analysis. Input data for the finite element analysis were generated using the commercial code I-DEAS, and the fracture mechanics analysis was performed using the ABAQUS. The crack configurations, the crack aspect ratio and the clad thickness were considered in the parametric study. The effects of these parameters on the reference nil-ductility transition temperature were also investigated.

• 콘크리트학회지
• /
• 제4권1호
• /
• pp.81-87
• /
• 1992

본 논문에서는 강섬유 혼입량과 강섬유 형상비에 대한 강섬유보강콘크리트의 휨 피로거동을 분석하기 위하여 일련의 강섬유보강콘크리트 시험체에 대하여 피로실험을 수행하였다. 피로실험은 3점 휨 실험법으로 실시하였으며, 실험시 각 시험체의 하중반복회수에 대한 중앙처짐과 피로파괴시의 반복회수를 조사하였다. 이들 실험 결과를 토대로 반복회수에 대한 강섬유보강콘크리트의 중앙처짐, 비탄성변형에너지 및 탄성변형형에너지등을 비교 분석하였으며, 강섬유보강콘크리트의 S-N선도를 작도하였다. 연구결과, 강섬유 혼입량이 클수록 영구변형에 손실되는 에너지가 크게 감소하고, 균열 확대에 소모되는 에너지가 증가하였으며, 동일한 강섬유 혼입량을 갖는 강섬유콘크리트의 경우 강섬유 형상비가 클수록 탄성변형에너지는 작았다. 아울러 본 피로실험 결과를 회귀분석하여 구한 S-N선도에 의하면 강섬유 혼입량이 1.0%인 강섬유보강 콘크리트의 반복회수 200만회에 대한 피로초기균열 발생시의 정적강도의 약 70%로 나타났다.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.649-656
• /
• 2008

손상 또는 균열된 구조물의 내구성을 향상시키려는 과제는 연구자들과 엔지니어들에게 중요한 과제로 떠오르고 있다. 팻취로 보강되지 않은 균열판과 팻취보강된 균열판의 응력확대계수 및 응력등고선의 산정 및 비교에 의한 균열선단에서의 파괴거동의 특성을 적분형 르장드르 다항식에 기초를 둔 계층적 무강성요소를 사용하여 표현하고자 한다. 이 연구에서는 등가단층이론이 채택되므로, 제안된 무강성요소는 불연속 균열부를 강성이 0인 연속체로 간주된다. 그러므로 균열을 모델링하는 무강성요소의 변장비는 매우 커질 수밖에 없다. 제안된 요소의 강건성을 보이기 위해 형상비 변화에 따른 에너지방출률, 변위 및 응력값에 대한 유한요소해의 민감도는 변장비를 2000까지 증가시켜 가면서 평가되었다. 한편, 강성도미분법과 변위외삽법이 인장모우드가 발생되는 문제의 응력확대계수를 예측하는데 사용된다. 제안된 계층적 무강성요소는 팻취보강된 균열문제를 해석할 수 있는 대안중의 하나라 평가된다.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.571-576
• /
• 2023

In this study, the harmless crack size(a_hml) according to the residual stress depth was evaluated using the fatigue limit of SCM440 steel by quenching-tempering(QT) and induction hardening(IH), and threshold stress intensity factor of QT steel. Because the residual stress increased rapidly as the crack depth increased, a_hml was determined at the depth of all the crack aspect ratio(As) regardless of Type I-III, and a_hml also increased according to the residual stress depth. a_hml was minimal at As=1.0 and maximal at As=0.1, but was almost similar on each Type. a_hml was small the dependence on As.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.243-251
• /
• 2022

이 연구의 목적은 인장강도 및 형상비가 다른 폴리에틸렌 섬유가 무시멘트 복합재료의 인장거동에 미치는 영향을 실험적으로 조사하는 것이다. 이를 위하여 섬유 종류 및 물-결합재비를 달리한 세 가지 배합을 준비하였고, 밀도 실험, 압축강도 실험 및 일축인장 실험을 수행하였다. 실험결과 유사한 화학구조를 갖지만 인장강도가 10 % 낮고, 형상비가 8.3 % 높은 폴리에틸렌 섬유를 사용한 경우 복합재료의 인장변형성능과 인성이 각각 11.7 %와 12.4 % 높고 균열폭은 9.1 % 작은 성능을 나타내었다. 또한 동일한 폴리에틸렌 섬유를 사용한 경우 물-결합재비가 증가하여 복합재료의 강도가 낮지만 인장변형성능과 균열패턴이 향상될 수 있는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.17-27
• /
• 1991

본 논문에서는 구조물의 응력확대 계수를 균열선단주위에서 정의되는 표면적분법에 의하여 구하는 방법을 연구하였다. 통상의 J적분법을 변형시켜 표면 적분법을 유도하였으며 물체력을 고려하는 경우도 포함시켰다. 유한요소 해석결과를 입력변수로 받아들여 표면적분법으로 응력확대계수 $K_I$과 $K_{II}$를 구하는 프로그램을 작성하였다. 형상비(요소길이/균열길이)가 25% 정도인 요소망에서 본 논문에서 제안한 포물선형태의 평활곡선함수를 사용한 결과, 외측적분반경이 균열길이의 1/3~1 되는 구간에서 비교적 정확한 응력확대 계수가 얻어지는 것을 알수 있었다.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1284-1296
• /
• 2018

Carbon fiber reinforced polymer (CFRP), plates bonding repair method is one of the simple repair methods for cracked steel structures. In this study, the influence of width of CFRP plates on bending fatigue life of out-of-plane gusset joint strengthened with CFRP plates was investigated from the experimental and numerical point of view. In the bending fatigue test of cracked out-of-plane gusset joint strengthened with CFRP plates, the effect of width of CFRP plates on crack growth life was clarified experimentally. Namely, it was revealed that the crack growth life becomes larger with increasing the width of CFRP plates. In the numerical approach, the stress intensity factor (SIF) at the surface point of a semi-elliptical surface crack was estimated based on the linear fracture mechanics. Furthermore, the extended fatigue life of cracked out-of-plane gusset joint strengthened with CFRP plates was evaluated by using the estimated SIF at the surface point and the empirical formula of the aspect ratio of semi-elliptical crack. As the results of numerical analysis, the estimated fatigue life of the specimen strengthened with CFRP plates showed the good agreement with the test results.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.723-740
• /
• 2016

Reinforced concrete corbels are generally used to transfer loads within a structural system, such as buildings, bridges, and facilities in general. They commonly present low aspect ratio, requiring an accurate model for shear strength prediction in order to promote flexural behavior. The model described here, originally developed for walls, was adapted for corbels. The model is based on a reinforced concrete panel, described by constitutive laws for concrete and steel and applied in a fixed direction. Equilibrium in the orthogonal direction to the shearing force allows for the estimation of the shear stress versus strain response. The original model yielded conservative results with important scatter, thus various modifications were implemented in order to improve strength predictions: 1) recalibration of the strut (crack) direction, capturing the absence of transverse reinforcement and axial load in most corbels, 2) inclusion of main (boundary) reinforcement in the equilibrium equation, capturing its participation in the mechanism, and 3) decrease in aspect ratio by considering the width of the loading plate in the formulation. To analyze the behavior of the theoretical model, a database of 109 specimens available in the literature was collected. The model yielded an average model-to-test shear strength ratio of 0.98 and a coefficient of variation of 0.16, showing also that most test variables are well captured with the model, and providing better results than the original model. The model strength prediction is compared with other models in the literature, resulting in one of the most accurate estimates.