• Journal of Environmental Science International
• /
• v.13 no.12
• /
• pp.1009-1013
• /
• 2004

The purpose of this study is to select the appropriate wild herbaceous plants on the rooftop. For the purpose of the experiments, 14 wild herbaceous plants were chosen. As the results of the experiments, the wild herbaceous plants growing on the culture soil(perlite) Among the 14 kinds of wild herbaceous plants, such as Chrysanthemum boreale, Taraxacum mongolicum, Aster Koraiensis, Aster yomena, Oenothera odorata, Oenothera lamarckiana, Patrinia scabiosaefolia showed good effects on growth of above ground parts. Therefore, these plants will effective for the rooftop revegetation. Callistephus chinensis and Lotus corniculatus var. Japonicus showed good height growth, wherase covering rate was worst. Chrysanthemum boreale, Platycodon grandiflorum, Patrinia scabiosaefolia were plant height, wherase covering rate was not good . For the expected number of seedings more than 3,000 per square meter, many seedings got withered to death while the survivors were suppressed to grow slow in the early stage due to the densityproblem.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.208-212
• /
• 2000

The effect of heat covering materials during cultivation of Shigyoku grape was examined on the effect of protection from freezing damage, labor reduction, and disease resistance during the wintering. This experimentwas accomplished using different combination of heat covering materials from the end of Nov as follows: straw and heat conservation cover B, kilding, color fabric A, and white needle punching fabric. Capacity of heat conservation was the least form white needle punching fabric, and the differences of other materials was slight. Early sprouting occurred by the treatment with heat conservation cover B, and the rate of sprouting was about 70.7% after 9 days of sprouting, showing 2.3-12.5% increase. Growth effect was not differ between heat conservation materials. Disease and insects occurred by the in dice 3.0-3.2 of crown gall from the heat conservation cover B treatment. Other damages were not observed or very little from other treatments. Demand of labor during steps of these treatments was more observed by 6% for kilding than heat conservation cover B, and those of color fabric A and white needle punching fabric were reduced by 6 and 15%, respectively.

• Asian Journal of Turfgrass Science
• /
• v.14 no.1
• /
• pp.251-256
• /
• 2000

The purpose of this study is to select the appropriate herbicide, which is needed to control the bentgrass in kentucky bluegrass(Poa pratensis) fairway effectively. The best control of bentgrass was observed at /$0.3mL\m^2$ of dithiopyr applied on Kentucky bluegrass. A field experiment was conducted to determine the priming effects on seed germination of Kentucky bluegrass. Ground covering rates by turfgrass were investigated under field conditions for 70 treatments by thirty days after treatment. The solid matrix priming(SMP) treatments on Kentucky bluegrass reduced the number of days requited for emergence and improved final cover ratings. Primed seeds of Kentucky bluegrass (incubated for five days at $20^{\circ}C$) resulted in most rapid germination and covering rate.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.103-110
• /
• 2000

This study was conducted from January to December in Kwang-ju city, 1999. Calculated methods were studied by emission factors in each industrial species. The results was that total emission rate of VOC was calculated at a mount of 12305 ton/year as coating(49.4) > vehicles(27.4) > gasoline vapors(6.1) > petroleum refineries(5.6) > graphic arts(4.4) > road covering(4.1) > dry cleang(3.0%) respectively. In vehicles emission rate, passenger car and taxi were about 2,700 ton/yr(60%) of total vehicle emission(3,300 ton/yr). The amount of building emission rate was about 1,900 ton/yr(30%) of total coating emission 6,083 ton/yr.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.8-13
• /
• 2011

This research was carried out to investigate relationship between underground part environment control and growth or yield of sweet pepper in greenhouse as affected by covering materials. Daily amount of applied nutrient solution for research period in the greenhouse of plasticfilm house was more 1.6 times than that in glass house. But daily absorptance rate of nutrient solution and specific electrical conductance of rockwool between two greenhouses were not different in the range of 71.3-73.3% and $4.17{\sim}4.23dS{\cdot}m^{-1}$ respectively. Leaf area of sweet pepper, in leaf growth characteristics in two greenhouses, were $123.0cm^2$/leaf (in glass house) and $119.5cm^2$/leaf (in plasticfilm house), but the another (fresh and dry weight, dry matter) were not different. But weekly yield per square meter in glass house was more 1.3 times than that in plasticfilm house as $850g{\cdot}m^{-2}$ and $650g{\cdot}m^{-2}$, respectively. Effect of slab EC and absorptance rate of nutrient solution on leaf growth characteristics and yield between two greenhouses were not different. The results show when sweet pepper is cultured in greenhouse as affected by covering materials and above ground part environment, the plant growth and yield are little affected by underground part environment.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.73-79
• /
• 2020

The objective of this study is to analyze the heat transfer loss of covering materials in a single-span plastic greenhouse under the steady-state wind environment. To achieve this objective, the following were conducted: (1) design of a small-scaled wind tunnel (SCWT) to analyze heat losses of the greenhouse and its performance; (2) determination of the overall heat transfer coefficient (OHTC) for the covering materials using a small-scaled greenhouse model. The SCWT consists of the blowing, dispersion, steady flow, reduction and testing areas. Each part of the SCWT was customized and designed to maintain air flow at steady state and to minimize the variances in the SCWT test. In this study, the OHTCs of the covering materials were calculated by separating each with the roof, side wall, front and back of the small-scaled greenhouse model. The results of this study show that the OHTC of the roof increases as wind speed increases but the zones in which the increase rate of the OHTC decreased, were distinguished by wind tunnel wing speed of 2 ms^-1. For the side wall, the increase rate of the OHTC was particularly higher in the 0-1 ms^-1 zone.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.99-105
• /
• 2001

In this paper, the selective normalized constant modulus algorithm(SNCMA) is applied to a fractionally spaced equalizer. The fractionally spaced equalizer is insensitive to the sampling timing because it processes received signals with the sampling rate larger than the symbol rate. The SNCMA improves the convergence rate by using the large step size for the most outer covering symbol belonging to the trust-level. This blind equalizer exhibits a fast start-up convergence rate as well as a reduced steady-state residual error compared to the fractionally spaced blind equalizer and the T-spaced blind equalizer using conventional blind algorithms.

• Corrosion Science and Technology
• /
• v.4 no.5
• /
• pp.201-206
• /
• 2005

Starting with the meaning of the word quality, diverse concepts connoted by the term are examined. Instead of a bathtub curve, the desirable shape of a failure rate covering the entire life of a good product, which might be called hockey-stick line, is introduced. From the hockey-stick line and the definition of reliability, two measurements are extracted. The terms r-reliability (failure rate) and durability (product life) are explained. The conceptual analysis of failure mechanics explains that reliability technology pertains to design area. The desirable shape of hazard rate curve of electronic items, hockey-stick line, clarifies that Mean-Time-to-failure (MTTF) as the inverse of failure rate can be regarded a nominal life. And Bx life, different from MTTF, is explained. Reliability relationships between components and set products are explained. Reshaped definitions of r-reliability and durability are recommended. The procedure to improve reliability and the reasons for failing to identify failure mode are clarified in order to search right solutions. And generalized Life-Stress failure model is recommended for the calculation of acceleration factor.

• East Asian Economic Review
• /
• v.17 no.3
• /
• pp.281-310
• /
• 2013

The aim of this paper is to estimate the degree of RMB misalignment from its equilibrium exchange rate by applying the Behavioral Equilibrium Exchange Rate (BEER) approach. We employ monthly data with reference to China's top 20 trading partners covering the period of 1997 to 2012. We find that the RMB was slightly overvalued before 2001 and significantly undervalued by up to 20 per cent in the end of 2006. There is evidence showing that the RMB approached to its equilibrium level from 2007 to 2008. However, the global financial crisis interrupted the trend of declining misalignment of RMB exchange rate. The RMB's total misalignment increased to around 25 per cent in the mid-2011 mainly because the RMB was re-pegged to the US dollar and some currencies of China's main trading partners depreciated during the period of crisis. More recently, the degree of RMB misalignment slightly declined since 2012 when the RMB proceeded to appreciate and China's ratio of current account surplus to GDP dropped considerably. Our findings prove that there is a trend of the RMB approaching to its equilibrium exchange rate since 2007 except for the period of crisis.

• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.65-70
• /
• 2005

A phase mixture model was employed to simulate the deformation behaviour of metallic materials covering a wide grain size range from micrometer to nanometer scale. In this model a polycrystalline material is treated as a mixture of two phases: grain interior phase whose plastic deformation is governed by dislocation and diffusion mechanisms and grain boundary 'phase' whose plastic flow is controlled by a boundary diffusion mechanism. The main target of this study was the effect of grain size on stress and its strain rate sensitivity as well as on the strain hardening. Conventional Hall-Petch behaviour in coarse grained materials at high strain rates governed by the dislocation glide mechanism was shown to be replaced with inverse Hall-Petch behaviour in ultrafine grained materials at low strain rates, when both phases deform predominantly by diffusion controlled mechanisms. The model predictions are illustrated by examples from literature.