• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.353-364
• /
• 2020

Recently in Korea, soybean harvesting has been delayed due to rainfall during the harvesting season, resulting in a reduction in yield and seed quality. This study was conducted to analyze the changes in yield and seed quality during delayed harvest with rainfall treatment using different harvesting methods, including field harvesting and polyethylene film covering after cutting fully-matured soybean plants (PE covering after cutting), with two major Korean soybean cultivars (Glycine max L), Pungsannamulkong and Daewonkong. The shattering rate of Pungsannamulkong, which is higher than that of Daewonkong, increased up to 41.8% when the harvest was delayed for 40 days without rainfall treatment by harvesting with PE covering after cutting. The weight of 100 seeds tended to decrease slightly as harvesting was delayed. When Daewonkong was harvested using the PE covering after cutting method with rainfall treatment, the yield decreased to the lowest level with a 0.8 kg ha^-1 daily reduction rate. Pungsannamulkong showed the lowest yield when harvested using PE covering after cutting without rainfall treatment with a 3.4 kg ha^-1 daily reduction rate. The infected seed rate increased according to the harvest delay in both cultivars, and significant differences were observed according to rainfall treatment and harvesting method. The germination rate was maintained above 95% even after 40 days of delayed harvest if there was no rainfall treatment. However, with rainfall treatment, the germination rate was significantly lowered as harvesting time was delayed. In the field harvesting with rainfall treatment, the germination rate decreased to 77.2% for Daewonkong and 76.5% for Pungsannamulkong after 40 days of harvest delay. For the 100-seed weight, effects of individual treatments and interactions between treatments were not observed. In contrast, the effect of interactions between treatments on the shattering rate was significant in both cultivars, indicating that the shattering rate had the greatest impact on the yield changes during delayed harvest.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1416-1418
• /
• 2002

In order to examine the thermal properties of the wire materials, we analyzed the shrinkage, the expansion and the form transformation, the surface structure according to the thermal deterioration temperature through the testing method for a heating shrinkage of Korean Industrial Standard(KS C 3004). For IV(600V grade polyvinyl chloride insulated wires), we measured the shrinkage and the expansion rate, analyzed the surface structure using SEM(Scanning Electron Microscope). In the result of this experiment, the shrinkage rate of IV 2.0mm covering was high in comparison with other wires. As the deterioration temperature rises gradually, the covering is molten and harden.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2012

The purpose of this study is to prepare a high strength fiberglass reinforced metal. Aluminum covering was carried out over carbon materials such as carbon fiber in order to increase their wettability to molten metals such as aluminum. A sputtering apparatus with a cylindrical target was fabricated to carry out the covering. Sputtering was caused by glow discharge between the target and the two anode plates attached to its top and bottom. As the substrate for preliminary test, a thin carbon wire was used instead of carbon fiber, and the wire was placed at the central axis of the target. Aluminium coating was formed on the whole surface of the substrate. The formation rate and structure of coating were varied by controlling the electrical potential of substrate. When the substrate was electrically isolated, coating with columnar structure was formed with a formation rate of $15{\mu}m/hr$. In case of grounded substrate, coating with amorphous structure was formed with a formation rate of $7{\mu}m/hr$.

• IE interfaces
• /
• v.5 no.1
• /
• pp.61-74
• /
• 1992

Recognizing the lack of empirical studies on the returns to R & D investment in Korean firms, this paper analyzes the relationships between R & D investment and corporate performances measured by sales growth rate, profit rate and PER. The data used here are from 167 firms in 8 different industries covering the period from 1985 to 1989. The results show that the profit rate is strongly correlated with R & D investment. But unlike the results of most studies previously done in the U.S., R & D investment only weakly and insignificantly correlated with sales growth and PER.

• Journal of Sericultural and Entomological Science
• /
• v.35 no.1
• /
• pp.21-27
• /
• 1993

Yongchonppong is liable to withering of leaf and it is lowering leaf value for the feed. In this respect, covering of the vinylon gauze over the feed has been carried out in the branch rearing system to sustain leaf value as itself. The covering of the vintlon gauze over Yongchonppong marks 7% and 9% increment of cocoon yield in dry season, spring rearing season, as compared to the non-covering of the vinylon gauze over Kaeryangppong and Yongchonppong, respectively. There was no significant differences in cocoon shell percentages of them. In more humid environment than average relative humidity in Korea the rearing results of "Yongchonppong" was improved by covering with vinylon gauze after feeding compared with the non-covered rearing. However, the vinylon guage covering was not effective for improving the rearing results of "Kaeryangppong". No effect of the vinylon gauze covering was seen in the area where it frequently rains and raining season lasts. In case of the non-covering of the vinylon gauze, Yongchonppong reduces repidly in the first three hours of exposure to the air, as compared to Kaeryangppong. The water content reductions rate of Yongchonppong in 6 hours of exposure to the air marks 7% to so when the dry vinylon gauze cover and 17 to 26% when the wet vinylon gauze covers, as compared to 58.8% of it for the noncovering of the vinylon gauze.f the vinylon gauze.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.2
• /
• pp.3758-3762
• /
• 1975

In order to find out the optimum size of nozzle of the power sprayer in the paddy field, four different sized hole of nozzles were tested on its discharge volume per unit time and its effective covering distance. 1. The discharge rate of each nozzle is proportional to square root of the transmitted internal pressure of liquid, and the discharge coefficient ranges from 0.82 to 0.86 at the pressure of 20 to 30 kg/$\textrm{cm}^2$. 2. The effective covering distance is increased as the size of the hole is larded and also the pressure is increased under under the limited pressure. Generally, the effective covering distance is not greatly increased at the pressure of above 25kg/$\textrm{cm}^2$. The distance from the nozzle to the spot where the largest amount of droplets are dropped is about 14.5m for 3.05mm nozzle and 16m for 4.05mm nozzle in the pressure range from 20 to 25kg/$\textrm{cm}^2$. 3. From the above results it is concluded that the 3mm nozzle with the power sprayers, which are now being supplied to the farmers, can be used for disease and insect control on the paddy field of which block size is 30m${\times}$100m, and operators need not to enter the field for spraying. For the 40m${\times}$100m block, 4mm nozzle should be used with large size of pump which discharge capacity is 60l/min or more.

• Health Policy and Management
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2016

Background: Selective health benefit was introduced for decreasing economic burden of patients. Medical devices with economic uncertainty have been covered as selective health benefit by National Health Insurance since December 2013. We aimed to analyze impact of selective health benefit to medical expenditure and provider behavior focused on electrosurgery (ultrasonic shears, electrothermal bipolar vessel sealers) for gastric cancer patients covered since December 2014. Methods: We used the National Health Insurance claims data of 2,698 patients underwent gastric cancer surgery between August 2014 and March 2015. Medical cost and patient sharing per inpatient day were analyzed to verify that covering electrosurgery increased medical expenditure and changed provider behavior from open surgery to endoscopic or laparoscopic surgery. Additionally, we analyzed the claim rate of medical device or goods relating gastric endoscopic and laparoscopic surgery. Results: Medical cost and patient sharing per inpatient day were increased after covering electosurgery as selective health benefit (39,724/1,421 won). However, there were no medical expenditure increases after adjusting claim of electosurgery and patient sharing was decreased 1,057 won especially. The coverage of selective health benefit did not increase the claim rate of medical device or goods related endoscopic or laparoscopic surgery, either. Conclusion: Covering electosurgery decreased patient economic burden and did not change of provider behavior. Expanding selective health benefit is needed to decrease economic burden of severe patients. Further study should evaluate the long term effect with accumulated data.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.81-90
• /
• 2008

Recently, geofiber(polyester) reinforced soil was added on soil-seed mixture spray to control erosion and to improve vegetation growth on rocky slope sites. This research was conducted to compare vegetation effects and soil hardness on three types of soil-seed mixture spray on stone gabion river bank [A type : soil-seed mixture spray underlying 30cm thick sand with geofiber(geofiber reinforced soil system), B type : soil-seed mixture spray underlying 30cm thick sand without geofiber, C type : soil-seed mixture spray]. Evaluation were made concerning vegetation coverage, soil hardness and moisture content. The results of this study showed that A type system was effective for the growth of vegetation and soil hardness when compareed to B type and C type. A type and B type showed higher covering rate than C type on stone gabion river bank, and especially A type showed the highest covering rate. Soil hardness and water content were high on A type vegetation system compared to B type and C type. We noted that high soil hardness and high moisture content with geofiber(geofiber reinforced soil system) were effective both to control erosion from water current impact and to be high coverage and species of vegetation on stone gabion river bank.

• Journal of the Korean institute of surface engineering
• /
• v.10 no.3
• /
• pp.3-11
• /
• 1977

The trivalent choromium plating process have been studied by serveral group of orkers in the recent years. In the plating process, Alecra 3 process is the most familiar one. Potassium formate and potassium chloride of the bath compositions in the above process, are exchanged for sodium formate and sodium chloride, and then they have been examined characteristics of the electrodeposition using above bath solution and a few optimum conditions. The results are as follows, (1) The characteristics of the electrodeposition ; that is, throwing power, covering power, appearance, and deposition rate are most satisfied when concentration of $CrCl_3{\cdot}6H_2O$ is 0.4 mol/l, and mol ratio of HCOONa to Chromium(III); HCOONa/$Cr^{3+}$, is 2 to 3. (2) Throwing power, covering power, color and deposit rate show a similiar tendency to Alecra 3 process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.3
• /
• pp.31-39
• /
• 2002

The main purpose of this study is to select the appropriate wild plants on the rooftop. For the purpose of the experiments, 14 wild plants(12 korean native wild plants and 2 naturalized wild plants) were chosen. As the results of the experiments, the wild plants growing on the culture soil(perlite) Among the 14 kinds of wild plants, such as Chrysanthemum boreale, Taraxacum mongolicum, Aster Koraiensis, Aster yomena, Oenothera odorata, Oenothera lamarckiana, Patrinia scabiosaefolia showed good effects on growth of above ground parts. Therefore, these plants will effective for the rooftop revegation. Callistephus chinensis and Lotus corniculatus var. Japonicus showed good height growth, wherase covering rate was worst. Chrysanthemum boreale, Platycodon grandiflorum, Patrinia scabiosaefolia were plant height, wherase covering rate was not good. As the results of the experiments, the wild plants growing on the culture soil(vermiculite) Taraxacum mongolicum, Aster Koraiensis, Oenothera lamarckiana, Aster yomena showed good effects on growth of above ground parts. Consequently, korean native wild plants such as Taraxacum mongolicum, Aster Koraiensis, Aster yomena and naturalized wild plants such as Oenothera odorata, Oenothera lamarckiana were effective wild plants for rooftop revegetation.