• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.99-105
• /
• 2019

In this paper, we describe the procedure of simulation design and measured results of a compact planar antenna for handset applications. The broad bandwidth covering the interested frequency band for mobile handset is achieved by introduction of an open ended L-shaped slot which is newly proposed and corresponds to the monopole slot. In order to minimize the impact on circuit part placement, the proposed antenna is placed on the ground plane edge of PCB with size of 60×65 mm². The measurement result for 10dB impedance bandwidths is 640 MHz (1.7~2.34 GHz), covering the required bandwidths for DCS (Digital Cellular System)-1800 (1710 ~ 1880 MHz) / IMT (International Mobile Telecommunication)-2000 (1885 ~ 2200 MHz) bands. In particular, we would like to emphasize the proposed antenna has an omnidirectional radiation pattern suitable for commercial wireless communication.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.4
• /
• pp.55-65
• /
• 2000

This paper presents a linear programming based algorithm for pattern classification. Pattern classification is being considered to be critical in the area of artificial intelligence and business applications. Previous methods employing linear programming have been aimed at two-group discrimination with one or more linear discriminant functions. Therefore, there are some limitations in applying available linear programming formulations directly to general multi-class classification problems. The algorithm proposed in this manuscript is based on quadratic or polynomial discriminant functions, which allow more flexibility in covering the class regions in the N-dimensional space. The proposed algorithm is compared with other competitive methods of pattern classification in experimental results and is shown to be competitive enough for a general purpose classifier.

• Journal of Fashion Business
• /
• v.8 no.4
• /
• pp.68-79
• /
• 2004

This study aims to understand the history of the Victorian age that attached importance to various designs and aesthetic aspects by art and craft movement, and to present that the Victorian pattern is a factor with unlimited possibility in application and development of the modern textile product designs. Therefore, through documents research home and abroad, I considered the periodical background of the Victorian style, a change course of textile, and the theoretical backing of the Victorian pattern, and I studied and analyzed the cases of being applied in the modern textile product designs by classifying apparel, home interior, and fashion accessories. First of all, in apparel, the Victorian pattern transformed into geometrical form had much relative importance, and secondly, in the home interior, the Victorian pattern was expressed realistically or it was represented more boldly and complexly with new materials or techniques introduced. Thirdly, in fashion accessories, decorative nature was shown in intense design with the real description of the Victorian flower pattern and brilliant colors. With these results, it was found out that when the Victorian pattern was applied in the modern textile product designs, it was the factor that could be expected to make a high value added suitable with the modern sense, and it was the pattern with developmental potential with its unlimited use range. Therefore, based on this study, it is considered that the development of textile product designs utilizing the Victorian pattern and academic research, reorganizing the Victorian pattern in accordance with the modern design should be continued.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.85-92
• /
• 2002

Two way grid single-layer domes are of great advantage in fabrication and construction because of the simple fact that they have only four members at each junction. But, from a point of view of mechanics, the rectangular latticed pattern gives rise to a nonuniform rigidity-distribution in the circumferential direction. If the equivalent rigidity is considered in the axial direction of members, the in-plane equivalent shearing rigidity depends only on the in-plane bending rigidity of members and its value is very small in comparison to that of the in-plane equivalent stretching rigidity. It has a tendency to decrease buckling -strength of dome considerably by external force. But it is possible to increase buckling strength by the use of roofing covering materials connected to framework. In a case like this, shearing rigidity of roofing material increases buckling strength of the overall structure and can be designed economically from the viewpoint of practice. Therefore, the purpose of this paper, in Lamella dome and rectangular latticed dome that are a set of 2-way grid dome, is to clarify the effects of roofing covering materials for increasing of buckling strength of overall dome. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. In case of Lamella domes which have nearly equal rigidity in the direction of circumference, the rigidity of roofing covering materials does not have a great influence on buckling-strength, but in rectangular latticed domes that has a clear periodicity of rigidity, the value of its buckling strength has a tendency to increase considerably with increasing rigidity of roofing covering materials 2. In case of rectangular latticed domes, as rise-span-ratio increases, models which is subjected to pressure -type-uniform loading than vertical-type-uniform loading are higher in the aspects of the increasing rate of buckling- strength according to the rate of shear reinforcement rigidity, but in case of Lamella dome, the condition of loading and rise-span-ratio do not have a great influence on the increasing rate of buckling strength according to the rate of shear reinforcement rigidity.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.8-14
• /
• 1992

The radiation pattern of a rectangular-grid array antenna consisted of rectangular waveguides is represented by multiplication of its element and array factors. Calculated radiation patterns for excitation of TES110T mode inside the waveguides suffer from the blindness at a particular direction on E-plane. Numerical simulations show that the blindness can be removed by inserting dielectric plug inside the waveguides or covering dielectric sheath in front of the waveguides.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of the Korean Society of Costume
• /
• v.51 no.8
• /
• pp.1-12
• /
• 2001

An empirical review on silk fabrics of the Chosen period showed that they varied in kind and design according to their uses. Thus the purpose of this study is to classify the fabrics into temple and excavated fabrics according to their uses and collected places and then to examine characteristics of each type. Concerning fabrics collected in temples. satin was most used, followed by twill, tabby, multiply, leno and gauze and clossing fabrics in order. Tabby and silk fabrics used Ju(紬) as their main material. Cho( ) was much more used in fabrics collected in temples than in excavated ones. This indicate that Cho( ), more luxurious than Ju(紬), had divine applications such as covering Buddha s bones of temples. Brilliant, colorful multiply fabrics using goldern and color threads had high effects of ornamenting altar covers, umbrellas, surplices and palanquins. Fabrics held in temples adapted composite designs, in which more than two shapes were used, rather than single ones. Single designs employed plant shapes in most cases. followed by treasures pattern, geometrical, cloud and animal shapes in order. Most composite designs used a combination of animal and plant shapes, followed by plant and geometry, treasures pattern and plant, cloud and animal, and animal, treasures pattern and plant in order. Few excavated fabrics used animal designs while fabrics collected in temples were often designed with shapes of propitious animals such as dragon. Treasures pattern. representing a good omen of Buddhism, was often used sing1y or sometimes compositely with another design.nother design.

• The Research Journal of the Costume Culture
• /
• v.5 no.4
• /
• pp.112-129
• /
• 1997

This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth＋2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.