• 대한가정학회지
• /
• 제11권1호
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• 농업과학연구
• /
• 제41권3호
• /
• pp.163-167
• /
• 2014

The average temperatures for year and winter season have been risen by $0.7{\circ}C$ and $1.4{\circ}C$, respectively, during the last 30 years. Recently abnormal climate phenomena occurred frequently results in severe loss of vegetable crops grown in Korea. Specially, Chinese cabbages grown in the southern area of Korea are often significantly affected by sudden cold waves during winter season before harvest. This experiment was conducted to find out a potential role of covering materials on the protection of frost damage of 'Bularm' chinese cabbage in the winter season. The lowest temperature was $-15.8^{\circ}C$ in non-covering, $-8.1^{\circ}C$ in the PE film covering and $-4.6^{\circ}C$ in the non-woven fabric covering with PE film, respectively. The cumulative times below $4.0^{\circ}C$ were 145.5 hours for the non-covering treatment, 94 hours in the PE film covering and 14.5 hours in the non-woven fabric covering with PE film, respectively. The symptoms of frost damage were severe at non-covering chinese cabbages compared to polyethylene film (PE) non-woven fabric with PE covering ones. Microscopic studies showed the normal anatomical structure of palisade and spongy tissue of cabbage leaves covered with non-woven fabric with PE film. Leaf cells, however, were slightly damaged in cabbages covered with PE film alone, and both palisade and spongy cells were were completely collapsed in uncovered cabbages. The result of this study suggests that chinese cabbages is required to be covered with non-woven fabric with PE film to minimize the frost damage by sudden cold wave below $-7^{\circ}C$.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.291-294
• /
• 2011

We studies a model for management of pepper anthracnose based covering method and spraying system in field. 1. Among 82 organic fungicides, 42 materials showed most effective inhibition against mycelia growth of the Colletotrichum acutatum in vitro. 23 formulated biocontrol agents were chosen to control the disease from 42 biocontrol agents in greenhouse. In the end, five kinds (2 plant extracts, 2 biopesiticides, 1 Bordeaux mixture) were selected from 23 materials in the field. 2. The mulching materials of bed covering in fruit season were thin non-woven fabric sheet and black plastic. The use of a fabric sheet was reduced the spread of anthracnose as compared to the plastic covering. 3. The application with the chosen materials was reduced 34% of anthracnose for 7 times sprays to planting 70 days as compared to the untreated control. In yield, nonwoven fabric sheet with formulated biopesticides was increased 17% than black plastic. 4. This result indicated that the developed biocontrol strategy could be an effective and economic crop protection system in organic pepper cultivation field.

• 한국자원식물학회지
• /
• 제13권3호
• /
• pp.208-212
• /
• 2000

보온 피복재 종류가 자옥 포도 유목의 월동시 동해방지, 노동력 절감 및 병해 발생 억제에 미치는 영향을 구명하기 위하여 11월 하순에 짚을 덮은 다음 보온덮개B, 킬딩, 칼라부직A 및 백색니들펀칭부직포 등을 피복하여 시험한 결과를 요약하면 다음과 같다. 1. 보온력은 백색니들펀칭부직포가 가장 불량하였고, 다른 보온재간에는 차이가 미미하였다. 2. 발아는 보온덮개B에서 빨리 시작되었으며, 발아 9일 후에도 발아율이 79.7%로 타 보온재 보다 2.3∼12.5% 높았다. 3. 생육은 보온재간에 차이가 없었으며, 병해 발생은 킬딩과 보온덮개B에서 뿌리혹병이 지수 3.0∼3.2로 다소 많이 발생되었을 뿐 기타 병해는 처리간에 차이가 없거나 미미 하였다. 4. 작업 단계별 소요노력은 보온덮개B에 비하여 킬딩은 6% 많았으나, 칼라부직A는 6%, 백색니들펀칭 부직포는 15%적었다.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.388-391
• /
• 2002

의류용 소재의 다양화와 소재의 복합화에 따라 최근 여러 가지의 합성섬유 관련소재가 선을 보이고 있다. 그 중 double covering two way 이질 복합사 제품은 high touch 및 fashion 용 차별용도의 최적소재를 도출하여 기존의 제품과는 차별화 할 수 있다는 점과, 기존 제품과는 그 물성이 전혀 다른 새로운 소재의 제품을 생산함에 따라 품질 고급화에 크게 기여할 수 있다는 점에서 그 중요성을 가지고 있다. (중략)

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.309-315
• /
• 2013

This study examines the difference of surface properties according to napping characteristic of artificial suedes, measuring surface structure observation, the contact/non-contact method roughness, warm-cool feeling of touch, and subjective hand evaluation. Surface and cross-section observations showed a discernible difference in fineness, curl, length, mount of napping, and covering power of base fabric. The surface properties of artificial suede evaluated by KES-FB4 showed that the shorter napping length the more smooth surface and the roughness increased reciprocally with friction resistance and surface contour when the nap length reaches a high level. The surface roughness measuring system applied a laser displacement sensor by a non-contact method to assess napping characteristic and the base fabric and napping height. Surface roughness decreased when napping was uniformly covered with base fabric; however, the surface roughness increased specifically with the uneven covering power of the base fabric. For qmax of the suedes, those that had short and smaller amounts of napping increased; however, the napping of length and amount at some stage generated a low qmax value. The warm sensation in all suedes were strongly perceived, but the cool sensation of the perception was lower in the subjective evaluation. Smoothness and softness were perceived when the suede has a long and large amount napping; however, smoothness and hardness were perceived when the suede was short and with the uneven covering power.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.326-330
• /
• 2015

본 시험은 노지 논고추 터널 재배시 피복용 재료에 따른 고추의 생육 및 수량에 미치는 영향을 조사하기 위하여 수행되었다. 터널 피복용 재료는 일라이트 부직포, P.E 비닐을 사용하였다. 기온과 지온은 일라이트 부직포 및 P.E 비닐 터널 처리구에서 노지보다 각각 $7-8^{\circ}C$, $2-3^{\circ}C$ 높았고, 상대 습도도 터널 설치구가 노지보다 30% 더 높게 유지되었다. 고추의 생육과 수량은 일라이트 부직포 및 P.E 비닐 터널 설치구에서 높았고, 10a당 수량은 일라이트 부직포 및 P.E 비닐을 이용한 터널 재배시 노지 재배 대비 각각 30%, 26% 증수되어 고추 논재배시 수량확보를 위한 재배법으로 적용이 가능할 것으로 판단된다.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.118-122
• /
• 2000

An extensive investigation has been made for the possible utilization of polypropylene spunbonded fabrics in rice seedling nursery. Considering the cropping systems available in southern part of Korea, sowing dates were fixed at April 5 and April 20 for single cropping and May 6 and May 26 for double cropping. Nursery period was fixed to 35 days for each sowing date. Four different thickness of polypropylene spunbonded fabrics, 40, 60, 80, 100 g/$m^2$, were tested in rice seedling nursery. The temperature and light intensity were not significantly different among the thickness of polypropylene spunbonded fabrics. Light intensity was significantly reduced in polypropylene spunbonded fabric (72.2 Klux) compared with polyethylene mm (85.5 Klux), however, the reduced light intensity was enough for seedling growth. The temperature in the polypropylene spunbonded fabric covering during low air temperature was higher than that in polyethylene mm tunnel. At transplanting, the rice seedlings grown in polypropylene spunbonded fabric condition was shorter (17cm) but healthier than those in polyethylene mm (23cm). The estimated possible nursery periods using the polypropylene spunbonded fabric covering may start from April 1 at Chinju (plain area in Southern Korea, 20m altitude) and April 15 at Susang (mountainous area, 430m altitude). Labour hours and cost were reduced by about 28% and 48%, respectively.