• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.397-404
• /
• 2012

Jeju where concentrates on agriculture and tourism, conversion of outdoor culture into cultivation under structure happens actively for the purpose of increasing profit so continuous examination on house cultivation area is very important for this region. This paper is to suggest the effective image classification method using high resolution satellite image to detect the greenhouse. We carried out classification of greenhouse using the supervised classification and rule-based classification method about Formosat-2 images. Connecting result of two classification try to find accuracy improvement for greenhouse detection. Results about each classification method were calculated the accuracy by comparing with the result of visual detection. As a result, mahalanobis distance among the supervised methods was resulted in the highest detection. Also, it could be checked that detection accuracy was improved by tying with result of supervised method and result of rule-based classification. Therefore, it was expected that effective detection of greenhouse would be feasible if henceforward further study is performed in the process of connecting supervised classification and rule-based classification.

• Smart Structures and Systems
• /
• v.4 no.3
• /
• pp.343-365
• /
• 2008

In this study, the frequency domain method which utilizes the evaluation of changes in the structural mode shape is adopted to identify regions which contain localized damages. Frequency response function (FRF) values corresponding to the modal frequency, analogous to the mode shape coefficients, are used since change in natural frequency of the system is usually insignificant for localized damage. This method requires only few sensors to obtain the dynamic response of the structure at specific locations to determine the FRF via fast-Fourier transform (FFT). Numerical examples of an aluminum plate, which includes damages of varying severity, locations and combinations of multiple locations, are presented to demonstrate the feasibility of the method. An experimental verification of the method is also done using an aluminum plate with two different degrees of damage, namely a half-through notch and a through notch. The inconsistency in attaining the FRF values for practical applications due to varying impact load may be overcome via statistical averaging, although large variations in the loading in terms of the contact duration should still be avoided. Nonetheless, this method needs special attention when the damages induce notable changes in the modal frequency, such as when the damages are of high severity or cover more extensive area or near the boundary where the support condition is modified. This is largely due to the significant decrease in the frequency term compared to the increase in the vibration amplitude. For practical reasons such as the use of limited number of sensors and to facilitate automation, extending the resolution of this method of identification may not be efficient. Hence, methods based on wave propagation can be employed as a complement on the isolated region to provide an accurate localization as well as to trace the geometry of the damage.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.47-54
• /
• 2003

Climate of Mongolia is a driven force on natural conditions as well as socio-economic development of the country. Due to the precariousness of climate conditions and traditional economic structure, natural disasters, specially disasters of meteorological and hydrological origin, have substantial effect upon the natural resources and socio-economic sectors of Mongolia. Mongolia's climate is characterized by high variability of weather parameters, and high frequency and magnitude of extreme climate and weather events. During the last few decades, climate of the country is changing significantly under the global warning. The annual mean air temperature for the whole territory of the country has increased by $1.56^{\circ}C$ during the last 60 years,. The winter temperature has increased by $1.56^{\circ}C$. These changes in temperature are spatially variable: winter warming is more pronounced in the high mountains and wide valleys between the mountains, and less so in the steppe and Gobi regions. There is a slight trend of increased precipitation during the last 60 years. The average precipitation rate is increased during 1940-1998 by 6%. This trend is not seasonally consistent: while summer precipitation increased by 11 %, spring precipitation decreased by 17. The climate change studies in Mongolia show that climate change will have a significant impact on natural resources such as water resources, natural rangeland, land use, snow cover, permafrost as well as major economic activities of arable farming, livestock, and society (i.e. human health, living standards, etc.) of Mongolia. Therefore, in new century, sustainable development of the country is defined by mitigating and adaptation policies of climate change. The objective of the presentation is to contribute one's idea in the how to reflect the changes in climate system and weather extreme events in the country's sustainable development concept.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.490-495
• /
• 2016

In the present study, a microstrip-fed monopole antenna is proposed for wireless local area network (WLAN) operations which cover dual band of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz). In order to obtain its compact structure and good omnidirectional radiation patterns, a modified inverted L-shaped slot separated from ground for impedance matching in 5 GHz band is etched on 2.4 GHz printed monopole antenna. The proposed antenna is designed and fabricated on a FR4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of $30{\times}45mm^2$. The measured impedance bandwidths (${\mid}S_{11}{\mid}{\leq}-10dB$) of fabricated antenna are 270 MHz (2.22 ~ 2.48 GHz) in 2.4 GHz band and 890 MHz (5.08 ~ 5.97 GHz) in 5 GHz band respectively. In particular, high gain of more than about 4 dBi and good omnidirectional radiation patterns have been observed over the entire frequency band of interest.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.2
• /
• pp.67-73
• /
• 2010

Unlike Urban building, horticultural facilities has a lot of heat loss through plastic or glass covering material which could be much influential to growing plant and consuming energy for heating greenhouse. In many cases, heat loss from a break of cover, a gap of joint sealing, the entrance to greenhouse and windows for ventilation are the main factors considered in calculating the heating load for horticultural facilities. however the normal observation through human eye and digital camera could not recognize where the heat loss occurred. but the infrared thermal image camera with detecting thermal difference could be very effective for noticing heat loss by analyzing infrared thermal image. In this study, greenhouse structure, covering material, internal and external provisions for Horticultural facilities were surveyed in different sites and Infrared thermal camera shooting and image analysis were performed for auditing heat loss from cultivation facilities The results from this study were that unexpected heat loss had been noticed in 7 representative cases of greenhouse such as side wall covered with single or double plastic, and the joint of horizontal thermal curtain, roof without horizontal thermal curtain, entrance to greenhouse, windows for ventilation. the most important factors for keeping heat energy were whether the horizontal thermal curtain with multifold thermal material was installed or not. The internal or external covering using multifold thermal curtain proved to be the most effective ways to keep heat energy from losing through heat transmission, heat radiation. from inside to outside the horticultural facilities.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.16
• /
• pp.183-203
• /
• 2001

To accomplish international electronic commerce via the Internet, the most serious dilemma is the international payment system. The BBL is a secure and effective electronic commerce framework for the replacement of traditional paper documents by electronic messages via the Internet providing significant benefits in terms of cost savings, improved logistics and reduced errors in documentation. The most important legal obstacles in the BBL are how to secure authenticity, non-repudiation and message integrity as well as the status of negotiability equivalent to paper B/L. These kinds of functions may be carried out through the electronic title registry of the Bolero International Limited. The technical structure is supported contractually by the Bolero Rulebook. And other documents except B/L can be made out without any legal or technical problems. What are the handicaps of the BBL in its practical use at this time? I can summarize the current and expected problems as follows: First, the fee to join Bolero Association Limited is burdensome to sellers, buyers and trade related organizations all over the world. Second, the liability in errors or defaults in operating central data registry of Bolero International Limited is limited to U.S.$100,000. The amount is not sufficient to the many bulk cargo owners to cover the damages. Third, businessmen are used to traditional paper documents; therefore it takes much time for them to change their customs and practices. So the BBL and traditional papers would be used simultaneously for the time being. Finally, it is very important to incorporate the Rulebook, a multilateral contract binding on all users signed, in each domestic law, which will accomplish the uniform law basis.

• Journal of the Korean Society for information Management
• /
• v.16 no.2
• /
• pp.105-134
• /
• 1999

For efficient and precise searches in the Web environment, resources should be coded in a structured way. HTML does not cover semantic structure because of its fixed tagging. XML, which has emerged as an alternative standard markuplanguage, uses custom tags that allow structural searching. Therefore, this study aims to compare XML with HTML in terms of their characteristics and retrieval functions. In order to test retrieval functions of XML- and HTML-based systems, we constructed an experimental XML-based system. The XML-based system has several advantages over the HTML system. However, some improvements are needed to make the XML system more comprehensive and effective. First, XML document search engines with user-friendly interfaces are needed. Second, popular Web browsers such as Explorer and Communicator need to support XML 1.0 specification completely. Third, Open DTD format, which will allow information retrieval systems to retrieve documents and compress them into one single format, is also needed to control Web documents more efficiently.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.131-144
• /
• 2015

With a view to creating beautiful farm villages, this study aims to exploit space syntax and thereby establish a systematic plan for refurbishing common farming facilities in farm villages by expanding a remodeling plan that has so far been focused on farm houses to cover different villages as well as in spatial scope. For this purpose, the study has extracted a system of categories for common ownership facilities in farm villages and applicable elements needed for collaboration in the space of joint production by performing a comprehensive analysis of related literature for the purpose of researching the distribution of common farming facilities. Based on such categorization of applicable elements, the study conducted a field survey of the four types of farm villages such as suburban area (Hwaseong), inland farming-centered area (Jeungpyeong), coastal & plain area (Goheung), and mid-mountain area (Gangneung), through group discussions by participating researchers and field pilot surveys. Also, space analysis has come up with measurements based on the five criteria of integration, local integration, control, connectivity, and spatial depth. And a plan for type-specific remodelling of common farming facilities has been drawn up through standardization based on the values in integration for different villages and spatial depth for common farming facilities. The significance of the current study consists in identifying how the location of common farming facilities influences the characteristics of different villages in terms of spatial structure and then drawing up guidelines for planning their placement.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.518-526
• /
• 2006

Nanoporous alumina film was fabricated by anodization of an aluminum sheet. Highly ordered nanowellstructured and nanonets-tructured metal films were fabricated by vacuum evaporation of several metals(Al, Sn, and Co) using the anodic nanoporous alumina film as a template. In this experiment, an anodic porous alumina film with the cell size of 100 nm and the pore diameter of 60 nm was used. The resistance heating method was adopted for evaporating a desired metal, and vapor deposition was carried out under the base pressure of torr. It was founded that whether the structure fabricated by vacuum evaporation is nanowell or nanonet is dependent on the amount of deposited material. When an anodic porous alumina film with the cell size of 100 nm and the pore diameter of 60 nm was used, a nanowell-structured film was fabricated when a sufficient amount of metal was suppled to cover the surface pores. On the other hand, nanonet-structured film was fabricated bellow a half the amount of metal required for nanowell-structured film.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2568-2574
• /
• 2005

Control architecture of the action based robot engineering can be divided into two types of deliberate type - and reactive type- controller. Typical deliberate type, slow in reaction speed, is well suited for the realization of the higher intelligence with its capability to forecast on the basis of environmental model according to time flow, while reactive type is suitable for the lower intelligence as it fits to the realization of speedy reactive action by inputting the sensor without a complete environmental model. Looking at the environments in the application areas in which robots are actually used, we can see that they have been mostly covered by the uncertain and unknown dynamic changes depending on time and place, the previously known knowledge being existed though. It may cause, therefore, any deterioration of the robot performance as well as further happen such cases as the robots can not carry out their desired performances, when any one of these two types is solely engaged. Accordingly this paper aims at suggesting Goal-oriented Geometric Model(GGM) Based Intelligent System Architecture which leads the actions of the robots to perform their jobs under variously changing environment and applying the suggested system structure to the navigation issues of the robots. When the robots do perform navigation in human life changing in a various manner with time, they can appropriately respond to the changing environment by doing the action with the recognition of the state. Extending this concept to cover the highest hierarchy without sticking only to the actions of the robots can lead us to apply to the algorithm to perform various small jobs required for the carrying-out of a large main job.