• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1385-1394
• /
• 2022

This study was to analyze the change in albedo by level-2 land cover map for 20 years(2002-2021) using MODerate resolution Imaging Spectroradiometer (MODIS) data. Also, the difference from the MODIS data was analyzed using the 10-year (2012-2021) data of Visible Infrared Imaging Radiometer Suite (VIIRS). For the albedo data of MODIS and VIIRS, daily albedo data, MCD43A3 and VNP43IA, of 500 m spatial resolution of sinusoidal tile grid produced by Bidirectional Reflectance Distribution Function (BRDF) model were prepared for the South Korea range. Reprojection was performed using the code written based on Python 3.9, and the nearest neighbor was applied as the resampling method. White sky albedo and black sky albedo of shortwave were used for analysis. As a result of 20-year albedo analysis using MODIS data, the albedo tends to rise in all land use. Compared to the 2000s (2002-2011), the average albedo of the 2010s (2012-2021) showed the most significant increase of 0.0027 in the forest area, followed by the grass increase of 0.0024. As a result of comparing the albedo of VIIRS and MODIS, it was found that the albedo of VIIRS was larger from 0.001 to 0.1, which was considered to be due to differences in the surface reflectivity according to the time of image capture and sensor characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.433-442
• /
• 2010

A control of chloride diffusion coefficient is very essential for service life of reinforced concrete (RC) structures exposed to chloride attack so that much studies have been focused on this work. The purpose of this study is to derive the intended diffusion coefficient which satisfies intended service life and propose a technique for optimum concrete mixture through genetic algorithm(GA). For this study, 30 data with mixture proportions and related diffusion coefficients are analyzed. Utilizing 27 data, fitness function for diffusion coefficient is obtained with variables of water to binder ratio(W/B), weight of cement, mineral admixture(slag, flay ash, and silica fume), sand, and coarse aggregate. 3 data are used for verification of the results from GA. Average error from fitness function is observed to 18.7% for 27 data for diffusion coefficient with 16.0% of coefficient of variance. For the verification using 3 data, a range of error for mixture proportions through GA is evaluated to 0.3~9.3% in 3 given diffusion coefficients. Assuming the durability design parameters like intended service life, cover depth, surface chloride content, and replacement ratio of mineral admixture, target diffusion coefficient, where exterior conditions like relative humidity(R.H.) and temperature, is derived and optimum design mixtures for concrete are proposed. In this paper, applicability of GA is attempted for durability mixture design and the proposed technique would be improved with enhancement of comprehensive data set including wider range of diffusion coefficients.

• Geomechanics and Engineering
• /
• v.34 no.4
• /
• pp.449-459
• /
• 2023

The design and development of underground nuclear waste repositories should cover the performance evaluation of the different components such as the construction materials because the long term stability will depend on their response to the surrounding conditions. In South Korea, Gyeonju bentonite has been proposed as a candidate to be used as buffer and backfilling material, especially in the form of blocks to speed up the construction process. In this study, various cylindrical samples were prepared with different dry density and water content, and their physical and mechanical properties were analyzed and correlated with X-ray CT observations. The main objective was to characterize the samples and establish correlations for non-destructive estimation of physical and mechanical properties through the utilization of X-ray CT images. The results showed that the Uniaxial Compression Strength and the P-wave velocity have an increasing relationship with the dry density. Also, a higher water content increased the values of the measure parameters, especially for the P-wave velocity. The X-ray CT analysis indicated a clear relation between the mean CT value and the dry density, Uniaxial Compression Strength, and P-wave velocity. The effect of the higher water content was also captured by the mean CT value. Also, the relationship between the mean CT value and the dry density was used to plot CT dry densities using CT images only. Moreover, the histograms also provided information about the samples heterogeneity through the histograms' full width at half maximum values. Finally, the particle size and heterogeneity were also analyzed using the Madogram function. This function identified small particles in uniform samples and large particles in some samples as a result of poor mixing during preparation. Also, the μ_max value correlated with the heterogeneity, and higher values represented samples with larger ranges of CT values or particle densities. These image-based tools have been shown to be useful on the non-destructive characterization of bentonite samples, and the establishment of correlations to obtain physical and mechanical parameters solely from CT images.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1041-1043
• /
• 1993

Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)＋dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.4
• /
• pp.551-556
• /
• 2012

The database for the oriental medicine had been existed in documentation in past times and it has been developed to the database type for random accesses in the information society. However, the aspects of the database are not so diversified and the database for the bio herbal material exists in widened type dictionary style. It is a situation that the database which handles the in-depth raw herbal medicines is not sufficient in its quantity and quality. Korean wild grape is a deciduous plant categorized into the Vitaceae and it was found experimentally that it has various medical effects. It is one of the medical materials with higher potentiality of academic study and commercialization recently because it has a bigger possibility to be applied into diverse industrial fields including the medical product for health, food and beauty. We constituted the cooperative system among the Muju cluster business group for Korean mountain wild grapes, Physiology Laboratory in Kyung Hee University Oriental Medicine and Medical Classics Laboratory in Kyung Hee University Oriental Medicine with a view to focusing on such potentiality and a database for Korean wild grapes was made a touchstone for establishing the in-depth database for the single bio medical materials. First of all, the literatures based on the North East Asia in ancient times had been categorized into the classical literature (Korean literature published by government organization, Korean classical literature, Chinese classical literature and classical literature fro Korean and Chinese oriental medicine) and modern literature (Modern literature for oriental medicine, modern literature for domestic and foreign herbal medicine) to cover the eastern and western research records and writings related to Korean wild grapes and the text-mining work has been performed through the cooperation system with the Medical Classics Laboratory in Kyung Hee University Oriental Medicine. First of all, the data for the experiment and theory for Korean wild grape were collected for the Medline database controlled by the Parliament Library of USA to arrange the domestic and foreign theses with topic for Korean wild grapes and the network hyperlink function and down load function were mounted for self-thesis searching function and active view based on the collected data. The thesis searching function provides various auxiliary functions and the searching is available according to the diverse searching/queries such as the name of sub species of Korean wild grape, the logical intersection index for the active ingredients, efficacy and elements. It was constituted for the researchers who design the Korean wild grape study to design of easier experiment. In addition, the data related to the patents for Korean wild grape which were collected from European Patent Office in response to the commercialization possibility and the system available for searching and view was established in the same viewpoint. Perl was used for the query programming and MS-SQL for database establishment and management in the designing of this database. Currently, the data is available for free use and the address is as follows. http://163.180.41.43:8011/index.html

• The Korean Nurse
• /
• v.34 no.5
• /
• pp.52-67
• /
• 1996

As home care in developing and becoming part of the health care delivery system in Korea, it is necessary to examine the use of nursing diagnoses and related nursing interventions with a view to increasing the standardization of nursing recording. This study was done to examine the nursing diagnosis and related nursing interventions used in home care. Data were collected using a chart review of the nursing notes written for the home care given to 38 patients who had pulmonary diseases or traumatic brain or spinal cord injuries and who had received home care as part of a demonstration home care project in a college of Nursing in Seoul. Early on in the project discussions as to format and use to nursing diagnosis was done and a tool was developed based on Gordon's eleven functional catergories with the addition of categories to cover family and environment. This tool was used in the data collection. Data included nursing diagnosis, etiologies and interventions. Real numbers and percentages were used in the analysis. The results show that the most frequently used diagnoses were in the category of physical function (75.6%), followed by the category of emotional and social function (21.8%). The least frequently used category was the one for family and environment (2.6%). The order of the frequency of recorded nursing interventions was the same, 82.3% for physical function, 16.2% of emotional and social function and 1.5% for family and environment. Under the category of physical functioning the most frequently used nursing diagnoses were related to mobility (62.2%), nutrition (23.6%) and elimination (11.9%). The frequencies of nursing interventions for these three diagnostic categories were 69.8%, 16.0% and 10.8% respectively. For emotional and social functioning, the most frequently used diagnoses were for cognition-perception (37.1%), self-perception (30.6%) and perception of health (23.7%). The ordering of the frequency of nursing interventions varied slightly. The most frequently used interventions were for the category of self-perception (31.7%) followed by cognition-perception (24.1%) and perception of health (22.9%). Looking at individual diagnoses, it was found that within the categroy of physical functioning, the most frequently used diagnosis was "impaired physical mobility" (29.5%) and this diagnosis involved 43.9% of the interventions. This was followed by "ineffective breathing pattern" (19.4%) with 17.7% of interventions, and "alteration in nutrition, less than body requirements" (11.2%) with 8.1% of the interventions. For the emotional social category, noncompliance was the most frequently used nursing diagnosis (18.2%) with 19.2% of the interventions. This was followed by "anxiety" (13.4%) with 13.6% of the interventions and by "knowledge deficit" (13.4%) but with only 5.5% of the interventions. The other diagnoses and interventions did not follow this pattern of frequency. Although there were a large number of diagnostic and intervention events, the number of actual diagnoses and interventions used were relatively small ranging from six interventions for "knowledge deficit" to 40 interventions for "imparied physical mobility". From this it can be concluded that the results of this study could be used as basic data for the development of standardized charts with respect to nursing diagnosis and interventions for clients with pulmonary disease and clients with traumatic brain or spinal cord injuries. Interventions that were direct care activities (1178) were much more frequent that education (430), and assessment and observation (148). There were also few diagnoses or interventions related to the family and the environment. This suggests two areas that need to be developed in home care and that need to be considered in the development of standardized records for use in home care.

• Radiation Oncology Journal
• /
• v.25 no.4
• /
• pp.268-277
• /
• 2007

Purpose: Respiratory motion is a considerable inhibiting factor for precise treatment with stereotactic radiosurgery using the CyberKnife (CK). In this study, we developed a moving phantom to simulate three-dimensional breathing movement and investigated the distortion of dose profiles between the use of a moving phantom and a static phantom. Materials and Methods: The phantom consisted of four pieces of polyethylene; two sheets of Gafchromic film were inserted for dosimetry. Treatment was planned to deliver 30 Gy to virtual tumors of 20, 30, 40, and 50 mm diameters using 104 beams and a single center mode. A specially designed robot produced three-dimensional motion in the right-left, anterior-posterior, and craniocaudal directions of 5, 10 and 20 mm, respectively. Using the optical density of the films as a function of dose, the dose profiles of both static and moving phantoms were measured. Results: The prescribed isodose to cover the virtual tumors on the static phantom were 80% for 20 mm, 84% for 30 mm, 83% for 40 mm and 80% for 50 mm tumors. However, to compensate for the respiratory motion, the minimum isodose levels to cover the moving target were 70% for the $30{\sim}50$ mm diameter tumors and 60% for a 20 mm tumor. For the 20 mm tumor, the gaps between the isodose curves for the static and moving phantoms were 3.2, 3.3, 3.5 and 1.1 mm for the cranial, caudal, right, and left direction, respectively. In the case of the 30 mm tumor, the gaps were 3.9, 4.2, 2.8, 0 mm, respectively. In the case of the 40 mm tumor, the gaps were 4.0, 4.8, 1.1, and 0 mm, respectively. In the case of the 50 mm diameter tumor, the gaps were 3.9, 3.9, 0 and 0 mm, respectively. Conclusion: For a tumor of a 20 mm diameter, the 80% isodose curve can be planned to cover the tumor; a 60% isodose curve will have to be chosen due to the tumor motion. The gap between these 80% and 60% curves is 5 mm. In tumors with diameters of 30, 40 and 50 mm, the whole tumor will be covered if an isodose curve of about 70% is selected, equivalent of placing a respiratory margin of below 5 mm. It was confirmed that during CK treatment for a moving tumor, the range of distortion produced by motion was less than the range of motion itself.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.7 no.1
• /
• pp.5-22
• /
• 1994

This paper attempts to define some general characteristics of the Abstracting Journals published in Korea as evidenced in those published during last ten years. This purpose is achieved by comparing the results of the two studies conducted by the author in 1984 and in 1994. Both studies were conducted to present the state of the art in the abstracting services in Korea. The major conclusions made in this paper are summarised as follows： (1) Researchers and professionals working in a small number of subject fields are benefited by the abstracting journals, which provide current-awareness services of recent achievements in research and development in Korea. Those in most of the fields have no abstracting journals of their own, and naturally they have no substantial abstract-ing services. Even many researchers and professionals in the fields that have some abstracting journals are not informed of research results in their fields because the abstracting journals are scattered in many narrow subjects and in many cases, the abstracting journals only cover publications in some specific forms and kinds. (2) Abstracting journals that cover more than two subject fields, which are supposed to be of more or less help to the researchers and professionals in the subject fields that have no abstracting journals published in their fields, have rapidly increased in number in the past ten years. Most of suh abstracting journals carry thesis and dissertation abstracts, and the rest, those of research papers published in specific places, in specific forms, by specific institutions, and of reports of research projects sponsored by specific foundations. These abstracting journals are not of the kind that comprehensively provide researchers in related fields with current awareness of publications of research results in Korea. (3) Most of the abstracting Journals existing in Korea are Published by institutions of higher education and research institutes, and the rest, by commercial publishers, industrial firms, libraries, information centres, government agencies, research foundations, learned societies, etc. Those which publish many titles are small in number and those publish one or two titles are large in number. The former is largely made up of institutions of higher education and research institutes. (4) The abstracting journals published in Korea are classified by type into those of dissertations, research papers, journal articles, patent specifications in that descending order. The fact that Master; and doctoral dissertation abstracts ate dominating in Korea is due to the irrational practice of publishing those abstracts at many different institutions. (5) Most of the abstracting journals existing in Korea are published by national or government-supported research institutes in order to publicise their own research outputs. Their coverage of literature is normally narrow, and naturally their value to users is limited. (6) Korean is the desirable language for the abstracting journals intended to be distributed within Korea. About half of the abstracting jornals published in Korea is printed in Korean and the other half, in foreign languages, and in Korean and in foreign languages together. All the abstracting journals in foreign languages are printed in English except one, which is printed in Japanese. (7) Some twenty per cent of the abstracting journals in Korea is published monthly, bimonthly, and quarterly. The others are published annually, biannually and irregularly. The latter may not function properly as a current-awareness tool due to long intervals between their issues. It is particularly undesirable that about half of the abstracting journals in Korea is published irregularly. Most of the abstracting journals published in Korea are distributed freely to individuals and institutions selected by the publishers. (8) The abstracting journals published by the use of computers increased drastically in the past ten years. The abstracting journals produced by the conventional type-setting method will possibly disappear in Korea in another ten years to come. Automation of the production of abstracting journals does not simply mean technical, economic improvement in publishing processes but availability of machine-readable databases that can be used for many other pur-poses, including generation of other bibliographical publications and provision of machine literature searching capabilities. Necessary steps should be taken for this important development immediately.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.115-137
• /
• 2010

Information technology (IT) outsourcing, the use of a third-party vendor to provide IT services, started in the late 1980s and early 1990s in Korea, and has increased rapidly since 2000. Recently, firms have increased their efforts to capture greater value from IT outsourcing. To date, there have been a large number of studies on IT outsourcing. Most prior studies on IT outsourcing have focused on outsourcing practices and decisions, and little attention has been paid to objectively measuring the value of IT outsourcing. In addition, studies that examined the performance of IT outsourcing have mainly relied on anecdotal evidence or practitioners' perceptions. Our study examines the contribution of IT outsourcing to economic growth in Korean industries over the 1990 to 2007 period, using a production function framework and a panel data set for 54 industries constructed from input-output tables, fixed-capital formation tables, and employment tables. Based on the framework and estimation procedures that Han, Kauffman and Nault (2010) used to examine the economic impact of IT outsourcing in U.S. industries, we evaluate the impact of IT outsourcing on output and productivity in Korean industries. Because IT outsourcing started to grow at a significantly more rapid pace in 2000, we compare the impact of IT outsourcing in pre- and post-2000 periods. Our industry-level panel data cover a large proportion of Korean economy-54 out of 58 Korean industries. This allows us greater opportunity to assess the impacts of IT outsourcing on objective performance measures, such as output and productivity. Using IT outsourcing and IT capital as our primary independent variables, we employ an extended Cobb-Douglas production function in which both variables are treated as factor inputs. We also derive and estimate a labor productivity equation to assess the impact of our IT variables on labor productivity. We use data from seven years (1990, 1993, 2000, 2003, 2005, 2006, and 2007) for which both input-output tables and fixed-capital formation tables are available. Combining the input-output tables and fixed-capital formation tables resulted in 54 industries. IT outsourcing is measured as the value of computer-related services purchased by each industry in a given year. All the variables have been converted to 2000 Korean Won using GDP deflators. To calculate labor hours, we use the average work hours for each sector provided by the OECD. To effectively control for heteroskedasticity and autocorrelation present in our dataset, we use the feasible generalized least squares (FGLS) procedures. Because the AR1 process may be industry-specific (i.e., panel-specific), we consider both common AR1 and panel-specific AR1 (PSAR1) processes in our estimations. We also include year dummies to control for year-specific effects common across industries, and sector dummies (as defined in the GDP deflator) to control for time-invariant sector-specific effects. Based on the full sample of 378 observations, we find that a 1% increase in IT outsourcing is associated with a 0.012~0.014% increase in gross output and a 1% increase in IT capital is associated with a 0.024~0.027% increase in gross output. To compare the contribution of IT outsourcing relative to that of IT capital, we examined gross marginal product (GMP). The average GMP of IT outsourcing was 6.423, which is substantially greater than that of IT capital at 2.093. This indicates that on average if an industry invests KRW 1 millon, it can increase its output by KRW 6.4 million. In terms of the contribution to labor productivity, we find that a 1% increase in IT outsourcing is associated with a 0.009~0.01% increase in labor productivity while a 1% increase in IT capital is associated with a 0.024~0.025% increase in labor productivity. Overall, our results indicate that IT outsourcing has made positive and economically meaningful contributions to output and productivity in Korean industries over the 1990 to 2007 period. The average GMP of IT outsourcing we report about Korean industries is 1.44 times greater than that in U.S. industries reported in Han et al. (2010). Further, we find that the contribution of IT outsourcing has been significantly greater in the 2000~2007 period during which the growth of IT outsourcing accelerated. Our study provides implication for policymakers and managers. First, our results suggest that Korean industries can capture further benefits by increasing investments in IT outsourcing. Second, our analyses and results provide a basis for managers to assess the impact of investments in IT outsourcing and IT capital in an objective and quantitative manner. Building on our study, future research should examine the impact of IT outsourcing at a more detailed industry level and the firm level.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2006

A parallel plate detector containing PTFE films in FEP film for relative dosimetry was designed to measure the response of detectors to S and 10 MV X-rays from a medical linear accelerator through different thicknesses of lead. The dielectric materials were 100 m thick. The set-up conditions for measurements with this detector were as follows: SSD=100 cm the test detector was at a depth of 5 cm and the reference chamber was at a depth of 10 cm from the phantom surface for 6 and 10 MV X-rays. Lead blocks were designed to cover the irradiated field. They were added to the tray to increase thickness sequentially. We found that the detector response decreased exponentially with the thickness of lead added. The linear attenuation coefficients of the test detector and reference chamber were 0.1414 and 0.541, respectively, for 6 MV X-rays and 0.1358 and 0.5279 for 10 MV X-rays. The test detector response was greater than that of the reference chamber. The response function was calculated from the measured values of the test detector and reference chamber using optimization. These optimized constants for the detector response function were independent of theenergy. As a result of optimizing the response function between detectors, the use of a relative dosimeter was validated, because the response of the test detector was 1% for 6 MV X-rays and 4% for 10 MV X-rays.