• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.288-293
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• The Research Journal of the Costume Culture
• /
• v.21 no.2
• /
• pp.261-271
• /
• 2013

This study aimed to identify professional climbers'demand for movement functionality in pants worn for rock climbing and ice climbing. Data were collected through in-depth interviews with 12 professional climbers using a semi-constructed questionnaire. The respondents were instructor-level experts whose climbing ability ranged from 5.9 to 5.14 on the Yosemite Decimal System rating scale. The research findings were as follows. Experts wore different climbing pants depending on the type of climbing. For example, they mostly wore high-stretch, second layer pants for rock climbing, while layering first layer, second layer, and third layer pants for ice climbing. There were gender differences regarding the parts of the body in which climbers reported the most discomfort when wearing climbing pants; male climbers most commonly responded 'knees', 'inner thighs' and 'hips' while their female counterparts most commonly responded 'inner thighs', 'exposed back and waist' and 'hips' in that order. Differences were found between rock climbing and ice climbing in terms of wear and tear on pants, preferred fabric properties, and length of pants. Wear and tear was found mainly on the hips and knees of rock climbing pants and on the inner lower hem of ice climbing pants. Listed in the order of preference, the most preferred fabric properties were elasticity, light weight, and durability for rock climbing pants and elasticity, insulation, and protection against water and wind for ice climbing pants. Regarding the length of rock climbing pants, respondents preferred ankle-length pants and cropped pants that did not cover the feet. For ice climbing pants, respondents favored heel-length pants that prevented pieces of ice from entering the clothing. Men showed a high level of preference for ergonomically cut climbing pants. Respondents said the waistband on climbing pants should be simplified so as not to adversely affect climbing maneuvers.

• Archives of Craniofacial Surgery
• /
• v.15 no.2
• /
• pp.70-74
• /
• 2014

Background: Many options are available to cover a palatal defect, including local or free flaps. The objective of this study was to evaluate the usefulness of palatal mucoperiosteal island flap in covering a palatal defect after tumor excision. Methods: Between October 2006 and July 2013, we identified 19 patients who underwent palatal reconstruction using a palatal mucoperiosteal island flap after tumor excision. All cases were retrospectively analyzed by defect location, size, tumor pathology, type of reconstruction, and functional outcomes. Speech and swallowing functions were evaluated using a 7-point visual analog scale (VAS) score. Results: Among the 19 patients, there were 7 men and 12 women with an age range of 25 to 74 years (mean, $52.5{\pm}14.3$ years). The size of flaps was $2-16cm^2$ (mean, $9.4{\pm}4.2cm^2$). Either unilateral or bilateral palatal island flaps were used depending on the size of defect. During the follow-up period (mean, $32.7{\pm}21.4$ months), four patients developed a temporary oronasal fistula, which healed without subsequent operative. The donor sites were well re-epithelized. Speech and swallowing function scores were $6.63{\pm}0.5$ and $6.58{\pm}0.69$ on the 7-point VAS, indicating the ability to eat solid foods and communicate verbally without significant disability. Conclusion: The palatal mucoperiosteal island flap is a good reconstruction modality for palatal defects if used under appropriate indications. The complication rates and donor site morbidity are low, with good functional outcomes.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.113-120
• /
• 2012

Today, Internet users can easily create and share the digital contents with others through various online content sharing services such as YouTube. So, many portal sites are flooded with lots of user created contents (UCC) in various media such as texts and videos. Estimating popularity of UCC is a crucial concern to both users and the site administrators. This paper proposes a method to predict the popularity of Internet articles, a kind of UCC, using the dynamics of the online contents themselves. To analyze the dynamics, we regarded the access counts of Internet posts as the popularity of them and analyzed the variation of the access counts. We derived a model to predict the popularity of a post represented by the time series of access counts, which is based on an exponential function. According to the experimental results, the difference between the actual access counts and the predicted ones is not more than 10 for 20,532 posts, which cover about 90.7% of the test set.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.147-156
• /
• 2010

Conformance testing for embedded software is to check whether software was correctly implemented according to software specification or not. In conformance testing, test scenarios must be extracted to cover every test cases of software. In a general way, test scenarios simply focus on testing all functions at least one time. But, test scenarios are necessary to consider efficiency of test execution. In this paper, we propose a test scenario extraction method by considering function's execution time and waiting time for user interaction. A test model is a graph model which is generated from state machine diagram and test cases in software specification. The test model is augmented by describing test execution time and user interaction information. Based on the test model, test scenarios are extracted by a modified Dijkstra's algorithm. Our test scenario approach can reduce testing time and improve test automation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.492-499
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.235-240
• /
• 2009

Simulation method based on probability was developed to evaluate the durability of reinforced concrete structures about chloride attack. The effects of the probability parameters(surface chloride ion concentration, initial combined chloride ion concentration, the depth of cover thickness of concrete, and the chloride ion diffusion coefficient), probability distribution function and it's variation were calculated using the Monte Carlo method and Fick's 2nd law. From the durability design method proposed in this study, the following results were obtained. 1) The effects of the distance from the coast and the chloride ion diffusion coefficient to the corrosion probability were quite high. 2) The effect of the variation of each parameters was relatively low.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.448-454
• /
• 2007

Purpose: The objective of this study was to evaluate the outcomes of using the free flap in the reconstruction of maxillary defects. Methods: 27 consecutive cases of maxillary reconstruction with free flap were reviewed. All clinical data were analyzed, including ideal selection of flap, time of reconstruction, recurrence of cancer, postoperative complications, flap design, and follow-up results. The main operative functional items, including speech, oral diet, mastication, eye globe position and function, respiration, and aesthetic results were evaluated. Results: Among the 24 patients who underwent maxillary reconstruction with the free flap, 14 patients underwent immediate reconstruction after maxillary cancer ablation, and 10 patients underwent delayed reconstruction. There occurred 1 flap loss. Recurrences of the cancer after the reconstruction happened in 2 cases. Postoperative complications were 3 cases of gravitational ptosis of the flap, 2 cases of the nasal obstruction, and 1 case of fistula formation. Out of 27 free flaps, there were 15 latissimus dorsi myocutaneous flaps, 5 radial forearm, 4 rectus abdominis myocutaneous flaps, 1 scapular flap, 2 fibula osteocutaneous flap, respectively. Flaps were designed such as 1 lobe in 9 cases, 2 lobes in 9 cases, and 3 lobes in 5 cases. Among the 14 patients who had intraoral defect or who had palatal resection surgery, 2 patients complained the inaccuracy of the pronunciation due to the ptosis of the flap. It was corrected by the reconstruction of the maxillary buttress and hung the sling to the upper direction. All of the 14 patients were able to take unrestricted diets. In 6 patients who had reconstruction of inferior orbital wall with rib bone graft, they preserved normal vision. Aesthetically, most of the patients were satisfied with the result. Conclusion: LD free flap is suggested in uni-maxilla defect as the 1st choice, and fibular osteocutaneous flap and calvarial bone graft to cover the larger defect in bi-maxilla defect.

• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.2
• /
• pp.187-205
• /
• 2003

The purpose of this study is to seek the characteristics of Jaryokwan m Korea and suggest the direction of the development for the future, through the analysis of the work process for Record Center(Jaryokwan) regulated in the Law of Records and Archives Management(the Law). According tn the Law, Jaryokwan is supposed to cover the areas of the management of semi-current records, government publications, books, and other records. The analysis of the Law shows that Korean Jaryokwan has the characteristics of divisional management of the semi-current records of governments, pursuing the integrated records and archives management systems, tightening the control function from the current-records stage, emphasizing the protection of evidences and security, contribution to the decentralizing storage of archives and simplifying the access to semi-current records for promoting it's usage. For the future development of Jaryokwan in Korea, this study suggests the imminent needs of the development of ideal model for Korean Jaryokwan, the legal enforcement of posting an Archivist the more detailed regulation, procedures and methods of work, the close collaboration with Library and Information Science, the pursuit of developing as a regional information center, increasing the flexibility of establishing Jaryokwan.

• Korean Journal of Remote Sensing
• /
• v.26 no.6
• /
• pp.653-664
• /
• 2010

The land surface reflectance is a key parameter influencing the climate near the surface. Therefore, it must be determined with sufficient accuracy for climate change research. In particular, the characteristics of the bidirectional reflectance distribution function (BRDF) when using earth observation system (EOS) are important for normalizing the reflected solar radiation from the earth's surface. Also, wide swath satellites like SPOT/VGT (VEGETATION) permit sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning. This gives a difficulty to BRDF model based reflectance normalization of high resolution satellites. The principal objective of the study is to add BRDF modeling of high resolution satellites and to supply insufficient angular sampling through identifying BRDF components from SPOT/VGT. This study is performed as the preliminary data for apply to high-resolution satellite. The study provides surface parameters by eliminating BRD effect when calculated biophysical index of plant by BRDF model. We use semi-empirical BRDF model to identify the BRD components. This study uses SPOT/VGT satellite data acquired in the S1 (daily) data. Modeled reflectance values show a good agreement with measured reflectance values from SPOT satellite. This study analyzes BRD effect components by using the NDVI(Normalized Difference Vegetation Index) and the angle components such as solar zenith angle, satellite zenith angle and relative azimuth angle. Geometric scattering kernel mainly depends on the azimuth angle variation and volumetric scattering kernel is less dependent on the azimuth angle variation. Also, forest from land cover shows the wider distribution of value than cropland, overall tendency is similar. Forest shows relatively larger value of geometric term ($K_1{\cdot}f_1$) than cropland, When performed comparison between cropland and forest. Angle and NDVI value are closely related.