• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.145-145
• /
• 1997

Recent progress of electric technology requires new piezoelectric crystals having superior properties such as zero temperature coefficients and large electromechanical coupling factors. We have developed a series of new leading chandidates, La$_3$Ga5SiO14(langasite, LGS), La3Nb0.5Ga5.5O14(LNG), La3Ta0.5O14(LTG), to satisfy those requirements. High quality LGS, LNG and LTG single crystals, with dimensions of 2 inches in diameter, were successfully grown by the Czochralski method at a pulling rate of 1mm/h. Since no variation of chemical composition was observed when whole melt in a crucible was crystallized, congruency of these compositions was confirmed. Physical constants such as elastic constants, dielectric constants and piezoelectric constants were measured. Filters and oscillators made of grown LGS, LNG and LTG single crystals showed superior properties such as three times wider passband than that of quartz, low insertion loss and easy processing, Langasite family crystals were shown to be superior materials to other known materials such as quartz, LiTaO$_3$, $\alpha$-AlPO$_4$ and Li$_2$B$_4$O7.

• 대한전자공학회논문지TC
• /
• 제47권5호
• /
• pp.60-68
• /
• 2010

통신서비스에 장애를 유발하는 전력선에 의한 전자유도 현상에 대한 방호를 위하여는 유도전압을 평가하여야 하고 상응한 대책을 수행하여야 한다. 유도전압을 평가하는 방식은 ITU 규격과 일본 유도자료로부터 국내에 도입되어 법률 고시화되어 있는데 이것으로 수용되지 못하는 유도 커플링상의 제원 요소들이 있다. 본 논문에서는 계산 수행 적용이 곤란한 범위를 포괄할 수 있도록 좀더 일반화된 고전적 유도 및 전자파 원론 해석 근간의 전자계 형성에 의한 소스와 관측점의 유도전압 산출 방식에 대한 기술을 분석하여 제시하였다.

• 대한화학회지
• /
• 제29권4호
• /
• pp.419-425
• /
• 1985

시험관내에서 효소에 의해 생성될 수 있을 것으로 생각되는 N-Methylamidinoglycine(isocreatine)을 glycine과 N, S-dimethylthiopseudouronium iodide로 부터 약 60% 수득율로 합성하였고, isocreation의 산성수용액을 가열하여, creatine이 creatinine으로 탈수 고리화되는 것처럼, 고리화된 isocreatinine도 얻었다. 한편 이들 화합물에 대해 원소분석, nmr 스펙트럼, 박층 크로마토그피(Rf) 및 아미노산분석기에서의 elution rate도 검토하였으며, 등전점을 측정하기 위해서 $^{14}C$-creatine, $^{14}C$-creatinine, $^{14}C$-isocreatine 및 $^{14}C$-isocreatinine도 합성하였다.

• Wind and Structures
• /
• 제25권5호
• /
• pp.415-432
• /
• 2017

The nonlinear aerodynamic instability of a tensioned plane orthotropic membrane structure is theoretically investigated in this paper. The interaction governing equation of wind-structure coupling is established by the Von $K\acute{a}rm\acute{a}n's$ large amplitude theory and the D'Alembert's principle. The aerodynamic force is determined by the potential flow theory of fluid mechanics and the thin airfoil theory of aerodynamics. Then the interaction governing equation is transformed into a second order nonlinear differential equation with constant coefficients by the Bubnov-Galerkin method. The critical wind velocity is obtained by judging the stability of the second order nonlinear differential equation. From the analysis of examples, we can conclude that it's of great significance to consider the orthotropy and geometrical nonlinearity to prevent the aerodynamic instability of plane membrane structures; we should comprehensively consider the effects of various factors on the design of plane membrane structures; and the formula of critical wind velocity obtained in this paper provides a more accurate theoretical solution for the aerodynamic stability of the plane membrane structures than the previous studies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.563-572
• /
• 2001

With the results of calculation for natural frequencies the reponses of forced coupled vibration of propulsion shafting system were investigated by the modal analysis method. For the forced vibration response analysis, the axial exciting forces, the axial damper/detuner, propeller exciting forces and damping coefficients were extensively considered. As the conclusion of this study, some items are cleared as follows.-The torsional vibration amplitudes are not influenced by the radial excitation forces of the crank shaft. -The axial vibration amplitudes are influenced by the tangential exciting forces as well as the radial exciting forces of the crank shaft. The increase of the amplitudes is observed in the speed range at the neighbourhood of any torsional critical speed. 1The closer the torsional and axial critical speed. the larger coupling effect becomes. -The axial exciting force of propeller is relatively strong comparing with axial exciting forces of cylinder gas pressure and oscillating inertia of reciprocating mechanism. Therefore, the following conclusions are obtained. -Torsional vibration calculation with the classical one dimensional model is still valid. -The influence of torsional excitation at each crank upon the axial vibration is improtant. especially in the neighbourhood of a torsional critical speed. That means that the calculation of axial vibration with the classical one dimensional model is inaccurate in most of cases.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.152-161
• /
• 2013

This paper presents a control effectiveness analysis of the hawkmoth Manduca sexta. A multibody dynamic model of the insect that considers the time-varying inertia of two flapping wings is established, based on measurement data from the real hawkmoth. A six-degree-of-freedom (6-DOF) multibody flight dynamics simulation environment is used to analyze the effectiveness of the control variables defined in a wing kinematics function. The aerodynamics from complex wing flapping motions is estimated by a blade element approach, including translational and rotational force coefficients derived from relevant experimental studies. Control characteristics of flight dynamics with respect to the changes of three angular degrees of freedom (stroke positional, feathering, and deviation angle) of the wing kinematics are investigated. Results show that the symmetric (asymmetric) wing kinematics change of each wing only affects the longitudinal (lateral) flight forces and moments, which implies that the longitudinal and lateral flight controls are decoupled. However, there are coupling effects within each plane of motion. In the longitudinal plane, pitch and forward/backward motion controls are coupled; in the lateral plane, roll and side-translation motion controls are coupled.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.591-598
• /
• 2003

3중 결합 구조의 방향성결합기로 구성된 새로운 구조의 트랜스버살 필터를 제안하였으며 sinc 함수를 이용하여 제안된 필터의 결합계수를 간단하게 구하는 방법도 소개하였다. 최고 -3 dB의 결합도를 갖는 일반적인 방향성결합기를 이용한 기존의 트랜스버살 필터는 방향성결합기 사이를 연결해 주는 연결선로의 영향에 의해 주파수 특성이 저하되는데 제안된 구조의 필터는 특성 저하 현상이 현저히 개선되며 또한 높은 결합도가 요구되는 광대역 필터의 경우 삽입손실 특성이 우수하다. 그리고 같은 통과대역폭의 경우 방향성결합기와 연결선로의 수가 기존 필터보다 적으며 집적도에 더 유리한 구조를 가지고 있다. 제안된 구조의 필터 특성을 제작을 통해 고찰하였으며 계산치와 비교하였다.

• 전력전자학회논문지
• /
• 제13권2호
• /
• pp.103-109
• /
• 2008

본 논문은 무전극램프의 조광제어에 관한 안정기 설계방법을 제안하였다. 주파수 가변을 통한 전력제어는 램프의 등가 임피던스를 나타내는 유도코일간의 결합계수, 플라즈마 저항은 전력에 대한 함수이기 때문에 부적합하다. 따라서 본 논문은 직류링크전압을 가변함으로서 램프 임피던스와 독립적으로 램프의 출력 전력을 제어함으로서 무전극램프를 조광제어 하였다. 직류 링크 전압 가변방법은 벅 컨버터에 의해 제어하였으며, 제안된 설계 방법의 시뮬레이션과 실험 결과를 통하여 논문의 타당함을 증명하였다.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.28-35
• /
• 2011

In this paper, the wave-induced motion characteristics of a floating pendulor are investigated numerically. A floating pendulor is a movable-body-type wave energy converter. This device consists of three main parts (floater, pendulum, and damping plates). In order to obtain the hydrodynamic coefficients and wave exciting forces acting on floating bodies, a higher-order boundary element method (HOBEM) using a wave Green function is applied to the present problems. The hinged motion of a pendulum is simulated by applying the penalty method. In order to obtain a more realistic motion response for a pendulor, numerical body damping is included. First, the wave force and motion characteristics of just a floater are observed with respect to different shape parameters. Then, a coupled analysis of a floater, pendulum, and damping plates is carried out. The relative pitch velocity and wave forces acting on the floating pendulor are compared with those of a fixed pendulor.

• 한국통신학회논문지
• /
• 제28권7A호
• /
• pp.557-562
• /
• 2003

An output multiplexer of manifold type is widely used in a recent satellite transponder for its mass and volume reduction. For correct operation, the filters of such a multiplexer must be singly terminated. In this paper, a simple synthesis method of a 6-pole dual-mode singly-terminated filter is described. From the transfer function of the filter, network parameters such as in/output terminations and coupling coefficients are obtained easily without complicated matrix algebra such as orthogonal projection and similarity transformation. Two different-structure filters are taken into consideration and the network parameters of each filter have been extracted from the same transfer function. It is shown that the responses of two filters are same to each other since their network parameters are obtained from the same transfer function. The method described in this paper can be applied to the other degree singly terminated filter.