This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.
In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.
L-[18F]FMAU ([18F]1b) was prepared from the precursor 2-O-[(trifluoromethyl)-sulfonyl]-1,3,5-tri-Obenzoyl- α-L-ribofuranose, by coupling the radioactive fluoro-sugar with the corresponding silylated thymine in 4 steps. The final products, including the α and β anomers, were purified using reverse phase HPLC with an appropriate solvent (5% CH3CN/H2O) at a flow rate of 3.0 mL/min. The total elapsed time of synthesis was about 180-200 min from EOB. The α/β anomeric ratio of the compounds was about 1:9, and the radiochemical purity of the product (β-form) was >98% with decay-corrected yields of 25-35%. All radioactive samples were confirmed using co-injection with pure non-radioactive analogues in every step. In the cellular uptake in vitro test of herpes simplex virus-thymidine kinase (HSV1-TK) gene expressed cells, the percent uptake of injected dose (%ID) of L- and D-FMAU was 37.28 and 65.86, respectively after 240 min incubation. However, the relative uptake (MCA-TK/MCA cellular uptake ratio) of L-FMAU was higher than that of D-FMAU (%ID of L-FMAU, 0.36 and D-FMAU, 0.93 after 240 min incubation in MCA cells). This means that L-FMAU will show better specific HSV1-TK gene expressed cell uptake for selective HSV1-TK gene imaging.
A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.
Perovskite $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3[PNN-PZT]$ ceramics were synthesized by conventional ceramic processing technique. In order to modify piezoelectric properties for sensor application in this system, NiO addition was considered to provide $Ni^{+2}$ as an acceptor, which was known to occupy with B site in the structure. The effect of NiO addition up to $8\;mol\%$ on the following piezoelectric properties as well as sintering properties was investigated. When NiO added more than $1\;mol\%$, average grain size was decreased and second phase was found to form. Moreover, the second phase caused decrease in relative dielectric constant $(\varepsilon_{33}T/\varepsilon0)$, electro-mechanical coupling factor $(k_p)$, and piezoelectric charge constant $(d_{33})$, while increasing mechanical quality factor $(Q_m)$. When $1\;mol\%$ NiO was added, density, dielectric properties and piezoelectric properties were abruptly increased.
철-희토류 화합물인 Sm-Fe 이원계에서 조성식 $SmFe_{7+x}M_{x}(M=Mo,\;V,\;Ti)$ 화합물을 급속냉각기술로 제조하여 강자성을 나타내는 새로운 자성상인 ${Sm(Fe,\;M)}_{7}$을 합성하였다. Sm-Fe 이원계에 제 2의 천이원소 Mo, V 또는 Ti를 첨가함으로써, ${Sm(Fe,\;M)}_{7}$ 자성상은 큐리온도(Tc)가 $T_{c}=355^{\circ}C$에 달했으며 x=0.8과 1.0 사이에서 $SmFe_{7+x}M_{x}(M=Mo,\;V,\;Ti)$의 고유보자력 ($_{i}H_{c}$)이 3~6 kOe를 갖는 신 자성상을 제조하였다. ${Sm(Fe,\;M)}_{7}$ 상은 급냉응고 된 상태에서나 열처리 후에도 변함없이 안정하였으며 오히려 급냉상태에서 보다 우수한 강자기 특성을 보였다. ${Sm(Fe,\;M)}_{7}$은 육방정계 결정구조를 갖는 능방정계이며 P6/mmm Space Group에 속하는 것으로 판명되었다. ${Sm(Fe,\;M)}_{7}$ 자성상이 고보자력을 나타내는 원천적인 이유는 급속냉각에 의하여 결정입도가 $2000~8000\;{\AA}$의 미립자로 형성되기 때문이며, 높은 규리온도를 보이는 까닭은 급속냉각에 의해 제 2의 천이원소인 Mo, V 또는 Ti의 Fe에 대한 고용도가 평형상태에서 보다 월등히 높아져 자기변환온도를 상승하게 하였기 때문이다.
일반적으로 유체-구조물 상호작용을 고려한 유체속 구조물들의 지진 및 진동해석에는 주어진 시스템에 대한 유체부가질량을 추정하여 구조물관 연계하는 단순해석 방법을 주로 사용한다. 실제로 유체속 구조물의 응답특성은 유체부가질량 뿐만 아니라 유체점성으로 인한 감쇠영향을 받으며 이들은 모두 연계항을 갖는 복잡한 행렬 형태로 나타난다. 본 연구에서는 비점성 및 점성 유체에 대한 Navier-Stokes 지배방정식의 선형화를 통한 유한요소 정식화를 유도하였다. 이를 이용하여 유한요소 해석 프로그램을 작성하고 6각형 단면특성을 갖는 액체금속로 노심에 대하여 덕트집합체 사이의 유체간격과 레이놀즈수 변화에 따른 유체부가질량과 유체감쇠에 대한 유한 요소 해석을 수행한 결과, 유체간격이 줄어들수록 유체부가질량은 유체점성의 영향을 크게 받고 유체감쇠는 점성으로 인하여 레이놀즈수의 영향을 크게 받는 것으로 나타났다. 또한 편심을 갖는 동축원통에 대한 유한요소 해석결과, 편심이 증가할수록 유체부가질량은 크게 증가하지만 유체감쇠는 편심이 작은 경우 거의 변화가 없으며 어느 일정 수준이상으로 편심이 커질 경우에는 크게 영향을 받는 것으로 나타났다.
본 논문은 λg/2 개방형 SIR 구조와 전송선로와 대칭 및 비대칭 개방형 스터브를 가진 포크-형태의 구조를 일체화한 이중대역 대역통과 여파가 설계에 대해 제안을 한다. 이중대역 효과를 얻기 위해, 제안된 여파기는 SIR 구조를 이용했고, SIR 구조의 임피던스 비율을 조절한다. 그러므로 여파기의 고조파는 임피던스 비율의 조절을 통해 위치가 이동하게 되며 이는 이중대역 효과를 얻을 수 있다. 이중대역 특성을 얻기 위해 SIR 구조를 반으로 나눈 상태에서 SIR 구조 사이에 개방형 스터브를 삽입하여 이중대역 효과를 얻는다. 또한 포크 형태의 구조에서 개방형 대칭 스터브의 길이를 조절함으로써 두 번째 주파수 응답을 얻는다. 포크 형태에서 비대칭 개방형 스터브는 길이의 조절을 통해 최적의 대역폭을 얻는다. 그러므로 제안된 대역통과 여파기의 첫 번째 중심 주파수는 5.896 GHz이며 대역폭은 13.6 % 이다. 이때, 측정 결과는 0.13 dB 및 33.6 dB이다. 두 번째 중심 주파수는 5.906 GHz이며 대역폭은 13.6 % 이다. 이때, 측정 결과는 0.15 dB 및 19.8 dB이다. 그 이유는 임피던스 비율(Δ)이 1보다 높으면 고조파의 위치는 낮은 주파수 대역으로 이동하게 된다. 그러나 임피던스 비율(Δ)이 1보 낮아지게 된다면 고조파의 위치는 높은 주파수 대역으로 이동하게 될 것이다. 이러한 특징을 이용하여 설계된 여파기의 기능은 측정 결과에서 얻을 수 있다. 제안한 대역통과 여파기는 입출력의 결합구조와 비아 홀이 없기 때문에 결합손실과 비아 에너지 집중 손실이 없다. 그러므로 성능이 우수하여 시스템 집적화가 가능하며 교통통신 시스템에서 활용되는 DSRC (dedicated short-range communication) 시스템 응용이 가능할 것으로 기대된다.
Statements of problem: The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured acrylic resin using glass fibers, have been suggested over the years. Silane is important for bonding between glass fiber and resin. Purpose: The aim of the present study was to investigate the effect of various silane on the strength of PMMA resin and roughness of resin-glass fiber complex after abrasion test. Material and methods: 3mm glass fiber (Chopped strand, Hankuk fiber Co., Milyang, Korea) was treated with 3 kinds of silane (MPS, EPS, APS) (Sila-ace, Chisso chemical, Tokyo, Japan) and mixed with PMMA resin(Vertex RS, Vertex Dental B.V., Zeist, Netherlands). Transverse strength and Young's modulus was measured using Instron (Instron model 4466, Instron, Massachusetts, USA). After abrasion test (The 858 Mini Bionix II Test System, MTS System Co., Minnesota, USA) surface roughness was evaluated using tester (Form Talysurf plus, Taylor Hopson Ltd., Leicester England). Examination of scanning electron microscope was also performed. Results: Within this study, the following conclusions were drawn. 1. Surface treatment of glass fiber with MPS and APS increased transverse strength of PMMA resin complex, but surface treatment with EPS decreased transverse strength of PMMA resin complex (p<0.05). 2. Silane treated glass fiber increased Young's modulus of PMMA resin complex compared to desized glass fiber (p<0.05). 3. Roughness increased after abrasion test in case of PMMA resin reinforced with desized glass fiber (p<0.05). 4. Roughness change was not observed after abrasion test in case of PMMA resin reinforced with silane treated glass fiber (p>0.05).
인간의 건강에 관련된 수질이나 대기의 기준설정과는 달리, 토질은 지협적이고 한정적인 토양의 기능과 이와 관련된 환경요소에 근거한다. 적정한 토질평가제도는 안전한 식품을 생산하거나, 인간과 동물의 건강증진, 그리고 토양의 퇴화 과정을 나타내는 토양성능 지표의 역할을 하여야 한다. 이에 필요한 요소는 첫째로 수분이동과 흡착의 용이성, 둘째로 식물생장의 유지, 셋째로 토양의 물리적 붕괴에 대한 저항성, 넷째로 안전한 식품생산 기반이다. 그리고 끝으로 비용 절감 농업관리와 식품생산 요소로서 토양은 토양과 수질의 영역, 식품사슬, 지속성과 효용성, 환경과 경제성을 포함하여야 한다. 토질지표는 기본 골격 내에서 각각의 기능에 대하여 여러 단계로 분리되며, 각각의 지표는 체계의 원칙에 근거하여 다목적 접근방법을 사웅하여 상대적 중요도를 반영하는 우선 순위와 가중치를 정한다. 각각의점수 환산체계는 낮은 단계부터 높은 단계로 또는 0주터 10의 범위에서 여러 단계로 등급화되어야 한다. 그리고 각각의 범위 수치에 가중치를 곱하고 그리고 토양의 여러 가지의 물리화학적 특성이 고려된 종합 토질등급으로 결론지어져야 된다. 토질 평가 방법을 개발하는데 필요한 기본 골격과 과정은 해당 지역의 대체 또는 기존의 농업방식으로 얻어진 정보를 사용함으로서 결정된다. 토질에 있어서 부수적인 과정, 관리방법, 그리고 정책의 효과를 검증하기 위한 확장된 기본골격의 용도 또한 고려되어져야 한다. 이외에도 하나의 가능한 토질지수의 형태를 개발하기 위해서는 토양의 특성과 토양 내로 유입되는 또는 기존의 화학물질을 연계시켜야된다. 이 연구는 토질의 평가 시 고려되어야 될 요소를 찾기 위한 접근 방법을 제시하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.