• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.94-94
• /
• 2000

In this paper, the performance of INS/GPS integration is analyzed. Generally the integration method is classified into two method. One is loosely coupled integration, Another is tightly coupled integration. For the simulation, the error model of Kalman fitter is defined and the result of simulation is analyzed. When the number of visible satellites is less than four, the error of tightly coupled integration is smaller than that of loosely coupled integration. To very the result of simulation, van test that use LP-81 IMU and Millen3151R GPS receiver is carried out.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.900-903
• /
• 2002

This study dealt with the experimental modal analysis of the perforated rectangular plate coupled with fluid. The natural frequencies of the perforated plate and solid plate in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plate in air. It was empirically found the natural frequencies of the perforated plate coupled with fluid. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. Additionally, the effect of distance between perforated plate and solid plate on the fluid-coupled natural frequency was investigated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.174-194
• /
• 2015

In this paper, an Energy Flow Analysis (EFA) for coplanar coupled Mindlin plates was performed to estimate their dynamic responses at high frequencies. Mindlin plate theory can consider the effects of shear distortion and rotatory inertia, which are very important at high frequencies. For EFA for coplanar coupled Mindlin plates, the wave transmission and reflection relationship for progressing out-of-plane waves (out-of-plane shear wave, bending dominant flexural wave, and shear dominant flexural wave) in coplanar coupled Mindlin plates was newly derived. To verify the validity of the EFA results, numerical analyses were performed for various cases where coplanar coupled Mindlin plates are excited by a harmonic point force, and the energy flow solutions for coplanar coupled Mindlin plates were compared with the classical solutions in the various conditions.

• 국제물리치료학회지
• /
• 제3권2호
• /
• pp.464-468
• /
• 2012

The objective of this study is to provide basic information on coupled motions in thoracic spine during lateral bending from a neutral position for football and baseball players as well as for general university students. In the experiment, a total of 30 subjects participated(football players: 10, baseball players: 10, general students: 10). All subjects were in their 20's. The subjects sat on a chair with lumbar support in a neutral position and bent to the right. As a result, for baseball players, coupled motions were observed in the opposite direction of the lateral bending in all parts of thoracic spine. For both football players and general students, coupled motions were observed in the same direction. These results confirmed that unilateral movements like baseball could affect coupled motions.

• 정보통신설비학회논문지
• /
• 제2권3호
• /
• pp.48-60
• /
• 2003

With the rapid successful deployment of WLANs worldwide in numerous hotspots for high data rate, wireless access for data services has created the need to integrate the Cellular Networks with WLAN Networks. The integrated wireless environment will provide the end user a much better service experience along with a single subscription and a single bill. In this paper we focus on inter-working approaches, which combine WLANs and Cellular Networks into an integrated wireless environment capable of ubiquitous access to data services and very high data rates in hotspots areas. We first list the key requirements which are currently being standardized within the 30PP for integration with WLANs networks. We discuss two inter-working architectures namely loosely coupled and tightly coupled This paper will detail the loosely coupled inter-working approach while briefly discussing the tightly coupled inter-working. Finally, we will conclude that the loosely coupled approach is evolutionary and less intrusive than the tightly coupled approach.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.533-539
• /
• 2018

In this paper, the transformer type superconducting fault current limiter (SFCL) with additionally coupled circuit was suggested and its peak fault current limiting characteristics due to the fault condition to affect the fault current were analyzed through the fault current limiting tests. The suggested transformer type SFCL is basically identical to the previous transformer type SFCL except for the additional coupled circuit. The additional coupled circuit, which consists of the magnetically coupled winding to the primary and the secondary windings together with another superconducting element and is connected in parallel with the secondary winding of the transformer type SFCL, is contributed to the peak fault current limiting operation for the larger transient fault current directly after the fault occurrence. To confirm the fault current limiting operation of the suggested SFCL, the fault current limiting tests of the suggested SFCL were performed and its effective peak fault current limiting characteristics were analyzed through the analysis on the electrical equivalent circuit.

• Structural Engineering and Mechanics
• /
• 제42권1호
• /
• pp.13-24
• /
• 2012

There are a large number of papers in the literature dealing with the free vibration analysis of single/multi-span uniform beam with multiple spring-mass systems, but that of coupled multi-span beams carrying spring-mass attachments is rare. In this note, free vibration analysis of a weakly coupled beam system with spring-mass attachments is conducted. The mode localization and frequency loci veering phenomena of the coupled beam system are investigated. Studies show that for weakly coupled beam system with spring-mass attachments, the mode localization and frequency loci veering will occur once there is a disorder in the system.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.43-50
• /
• 2006

In this successive study, the analytical realization of coupled system was introduced using the times series identification and spectrum analysis, which was compared with conventional FFT spectrum. Also, the numerical responses of second order system, which is coupled, were solved using the numerical calculation of Runge-Kutta Gill method. After numerical analysis, the displacement, velocity and acceleration were acquired. Among them, the response of displacement was used for the analysis of time series spectrum. Among several time series, the ARMAX algorithm was proved to be appropriate for the spectrum analysis of the coupled system. Using the separated response of 1st and 2nd mode, the mode was calculated separately. And the responses of mixed modes were also analyzed for calculation of the mixed modes in the coupled system.

• International journal of advanced smart convergence
• /
• 제7권1호
• /
• pp.7-14
• /
• 2018

In this paper, we derive a transfer function of cross-coupled microwave filter systems by using a characteristics of chain matrices. Depending on the lumped element of capacitor or inductor, the cross-coupled system is negatively- or positively system. We used a ladder network as a starting system composed of several subsystems connected in chain. Each subsystem is descrived by Laplace impedance. By solving the transmission zero characteristic equation derived from the cascaded subsystems, we can find the zeros of filter system with externally cross-coupled lumped elements. With the cross-coupled elements of capacitors, the numerator polynomial of system transfer function is used to locate the quadruplet zeros in complex plane. We show the polynomoials of numerator and denominator of cascaded transfer function, obtaining the zeros of the cross-coupled system.

• Wind and Structures
• /
• 제1권2호
• /
• pp.175-181
• /
• 1998

Torsional flutter occurs at 2D rectangular cylinders with side ratios B/D smaller than about 8 or 10. On the other hand, slender cylinders indicate the occurrence of coupled flutter, which means the coupled derivatives of slender cylinders have more significant role for flutter instability than that of bluffer ones. In this paper, based upon so called "Step-by-step analysis", it is clarified the coupled derivatives stabilize torsional flutter instability of bluffer cylinders (e.x. B/D=5), while they destabilize torsional flutter or coupled flutter instabilities of mores slender cylinders. The boundary of them exists between B/D=5 and 8.