• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1281-1286
• /
• 2015

항공기는 다양한 임무를 수행함으로써 장기간 운영 시 비행시간 누적으로 인해 피로균열을 발생시킬 수 있다. 주익 구조물에 균열이 발생하면 수명단축 등 여러 문제점들이 발생할 수 있다. 이의 해결을 위해 피로임계위치(Fatigue critical location, FCL)에서의 균열진전 해석이 필요하다. 균열진전 해석을 위해서는 장시간의 응력 스펙트럼이 필요한데 실제 항공기에서 필요한 만큼의 데이터를 얻는 것은 막대한 시간과 비이 소요된다. 본 논문에서는 SwRI(South West Research Institute)보고서에 제시되어있는 임무별 단시간 하중배수 자료를 바탕으로 Peak-Valley Cycle Counting 을 진행하여 장시간의 응력 스펙트럼을 산출하는 알고리즘을 개발하였다.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.1-9
• /
• 2005

An end beam is one of the most important structural members supporting uncovered freight under in-service loading. In general, it needs to endure over 25 years. However fatigue fracture has occurred at dynamic stress concentration location of the end beam because user's specifications demanded high speed and vehicle manufacturer made the uncovered freight car with comparatively low strength and stiffness. For durability analysis, finite element analysis is performed to evaluate the problem of uncovered freight structure and local strain. The uncovered freight car was operated on actual problematic railroad line to measure dynamic stress versus time history on the critical part from which a crack is initiated often. Rainflow cycle counting method was used to estimate fatigue damage at dangerous area under operating condition. Therefore, this study shows that analytical fatigue life at the end beam can be predicted on the basis of S-N curve and structure analysis and has a fairly good correlation with experimental fatigue life.

• 한국통신학회논문지
• /
• 제28권4B호
• /
• pp.288-297
• /
• 2003

TCP Reno 는 하나의 윈도우 내에서 다수 개의 패킷 손실이 발생하는 경우 손실된 패킷들을 효율적으로 복구하는 것이 불가능한 문제점을 가지과 있다. 이 문제점을 개선하기 위해서 설계된 TCP New-Reno 는 부분 스인 패킷(partial acknowledgement)를 통해 fast recovery를 연장함으로써 다수 개의 패킷 손실이 발생하더라도 이들을 재전송에 의해 복구하는 것이 가능하다. 그러나 TCP New-Reno 역시 재전송 패킷들이 다시 손질되는 경우 불가피한 RTO(Retransmission Timeout)가 발생한다는 문제점을 가지고 있다. 이런 문제점을 개선하기 위해서 중복 승인 패킷 수를 근거로 재전송 패킷 손실을 감지할 수 있는 DAC(Duplicate Acknowledgement Counting) 알고리듬을 제안한다. TCP Reno. TCP New-Reno 그리고 DAC를 사용하는 경우에 대해 손실 복구 과정을 정확하게 모델링하고 손실된 패킷이 복구되기 위한 조건들을 유도한다. 임의 패킷 손실 확률에 대한 손실 복구 확률을 수학적으로 계산하고 이를 통해 DAC가 TCP New-Reno 의 손실 복구 기능을 향상시킬 수 있다는 것을 보인다.

• 한국차세대컴퓨팅학회논문지
• /
• 제13권5호
• /
• pp.51-70
• /
• 2017

차량이동통신망의 가장 중요한 서비스 중의 하나인 안전운전 및 사고방지는 브로드캐스트의 신뢰적 전송에 크게 좌우된다. 브로드캐스트의 신뢰적 전송과 관련된 기존 연구들은 네트워크 밀집 상황에 따라 경쟁윈도우(Contention Window)의 크기를 휴리스틱하게 조절하는 방법을 통해 신뢰적 전송이 가능하도록 제안하고 있으나, 이러한 방법들은 여러 가지 문제점들을 가지고 있다. 본 논문에서는 경쟁 노드들의 수와 경쟁윈도우의 크기에 따른 싱글홉 브로드캐스트 전송 실패 확률을 계산할 수 있는 확률모델을 제안한다. 이 모델을 통해 경쟁노드의 수에 따른 브로드캐스트 전송 실패 확률을 최소로 하는 경쟁윈도우의 최소 크기를 계산하고, 브로드캐스트 시 경쟁윈도우의 크기로 사용함으로써, 가능한 최소의 전송딜레이를 가지는 동시에 브로드캐스트 전송 신뢰도를 크게 향상시킨다. 이 모델의 정확도 및 싱글홉, 멀티홉 브로드캐스트 전송의 신뢰도를 다양한 네트워크 밀도 시나리오에 따른 시뮬레이션을 통해 검증하였고, 거의 100 퍼센트에 가까운 신뢰적 전송 결과를 보여준다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권8호
• /
• pp.3397-3401
• /
• 2014

Determining cell quantity is a common problem in cytology research and anti-tumor drug development. A simple and low-cost method was developed to determine monolayer and adherent-growth cell quantities. The cell nucleus is located in the cytoplasm, and is independent. Thus, the nucleus cannot make contact even if the cell density is heavy. This phenomenon is the foundation of accurate cell-nucleus recognition. The cell nucleus is easily recognizable in images after fluorescent staining because it is independent. A one-to-one relationship exists between the nucleus and the cell; therefore, this method can be used to determine the quantity of proliferating cells. Results indicated that the activity of the histone deacetylase inhibitor Z1 was effective after this method was used. The nude-mouse xenograft model also revealed the potent anti-tumor activity of Z1. This research presents a new anti-tumor-drug evaluation method.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권1호
• /
• pp.15-22
• /
• 2015

멀티셋에서 중복을 제외한 서로 다른 원소의 수를 추정하는 것은 네트워크 트래픽 측정 분야에서 매우 잘 알려진 문제이며, 많은 알고리즘들이 제안되었다. 최근에는 선형 카운팅 기법(Linear Counting)에 기반해서 매우 작은 메모리만을 이용해서 멀티셋의 크기를 추정하는 알고리즘이 개발되었다. 너무 많은 데이터를 처리하기 어려운 경우 전체 데이터를 처리하지 않고, 패킷의 일부를 샘플링해서 사용하는데, 이 샘플링은 일반적으로 정확도에 부정적인 영향을 주는 것으로 알려져있다. 하지만, 이 논문에서는 멀티셋의 크기를 추정하는데 있어서 CSE를 이용하는 경우 샘플링이 정확도와 측정 범위의 측면에서 오히려 전수조사를 하는 MCSE보다 더 좋은 결과를 낼 수 있음을 보였다. 이를 입증하기 위해 수학적 분석, 실제 데이터를 이용한 실험을 수행하고, CSE, MCSE 그리고 CSES를 비교하였다.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.452-461
• /
• 1998

The pin power distribution is determined by analyzing the rotational gamma scanning data for 36 element fuel bundle of HANARO. A fission monitor of Nb$^{95}$ is chosen by considering the criteria of the half-life, fission yield, emitting ${\gamma}$-ray energy and probability. The ${\gamma}$-ray spectra were measured in Korea Atomic Energy Research Institute(KAERI) by using a HPGe detector and by rotating the fuel bundle at steps of 10$^{\circ}$. The counting rates of Nb$^{95}$ 766 keV ${\gamma}$-rays are determined by analyzing the full absorption peak in the spectra. A 36$\times$36 response matrix is obtained from calculating the contribution of each rod at every scanning angle by assuming 2-dimensional and parallel beam approximations for the measuring geometry. In terms of the measured counting rates and the calculated response matrix, an inverse problem is set up for the unknown distribution of activity concentrations of pins. To select a suitable solving method, the performances of three direct methods and the iterative least-square method are tested by solving simulation examples. The final solution is obtained by using the iterative least-square method that shows a good stability. The influences of detection error, step size of rotation and the collimator width are discussed on the accuracy of the numerical solution. Hence an improvement in the accuracy of the solution is proposed by reducing the collimator width of the scanning arrangement.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.395-400
• /
• 2005

An environmental radon monitoring system, comprising a radon-cup, an etching system, and a track counting system, was constructed. The radon cup is a cylindrical chamber with a radius of 2.2 cm and a height of 3.2 cm in combination with a CR-39 detector. Carbon is impregnated in the bodies of the detector chamber to avoid problem of an electrostatic charge. The optimized etching condition for the CR-39 exposed to a radon environment turned out to be a 6 N NaOH solution at 70^{\circ}$ over a 7hour period. The bulk etch rate under the optimized condition was $1.14{\pm}0.03\;{\mu}m\;h^{-1}$. The diameter of the tracks caused by radon and its progeny were found to be in the range of $10\~25\;{\mu}m$ under the optimized condition. The track images were observed with a track counting system, which consisted of an optical microscope, a color charged couple device (CCD) camera, and an image processor. The calibration factor of this system is obtained to be $0.105{\pm}0.006$ tracks $cm^2$ per Bq $m^{-3}$ d.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.55-63
• /
• 2013

Purpose: The present study aimed at image processing methods for automatic cell pattern recognition and morphological analysis for tissue engineering applications. The primary aim was to ascertain the novel algorithm of adaptive brightness correction from microscopic images for use as a potential image analysis. Methods: General microscopic image of cells has a minor problem which the central area is brighter than edge-area because of the light source. This may affect serious problems to threshold process for cell-number counting or cell pattern recognition. In order to compensate the problem, we processed to find the central point of brightness and give less weight-value as the distance to centroid. Results: The results presented that microscopic images through the brightness correction were performed clearer than those without brightness compensation. And the classification of mixed cells was performed as well, which is expected to be completed with pattern recognition later. Beside each detection ratio of hBMSCs and HeLa cells was 95% and 92%, respectively. Conclusions: Using this novel algorithm of adaptive brightness correction could control the easier approach to cell pattern recognition and counting cell numbers.

• 한국멀티미디어학회논문지
• /
• 제17권10호
• /
• pp.1150-1159
• /
• 2014

This paper proposes a method for extracting tissue cells from an organism image by an electron microscope and getting the whole cell number and the area from the cell. In general, the difference between the cell color and the background is used to extract tissue cell. However, there may be a problem when overlapped cells are seen as a single cell. To solve the problem, we split them by using cell size and curvature. This method has a 99% accuracy rate. To measure the cell area, we compute two areas, the inside and boundary of the cell. The inside is simply calculated by the number of pixels. The cell boundary is obtained by applying super sampling, linear interpolation, and cubic spline interpolation. It improves the error rate, 18%, 19%, and 120% respectively, in comparison to the counting method that counts a pixel area as 1.