• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.181-186
• /
• 2015

Measurement of xenon radioisotopes from nuclear fission is a key element for monitoring underground nuclear weapon tests. $^{131m}Xe$, $^{133}Xe$, $^{133}mXe$ and $^{135}Xe$ in the air can be detected via low background systems such as a beta-gamma coincidence counting system. Radioxenon monitoring is performed through air sampling, xenon extraction, measurement and spectrum analysis. The minimum detectable concentration of $^{135}Xe$ can be significantly variable depending on the sampling time, extraction time and data acquisition time due to its short half-life. In order to optimize the acquisition time with respect to certain experimental parameters such as sampling and xenon extraction, theoretical approach and experiment using SAUNA system were performed to determine the time to minimize the minimum detectable concentration, which the results were discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.85-91
• /
• 1986

Fatigue life is an important consideration for the design of offshore structures in deep sea and in hostile environments. In this paper, the effect of the bandwidth of random stresses on the fatigue life estimation of fixed offshore structures is investigated. The dynamic analysis is carried out in the frequency domain by using the equivalent linearization technique. Fatigue damages are calculated by two stress cycle counting methods; i.e., the narrow band method and the wide band method using rainflow counting technique. Example studies are carried out for two different structures. Numerical results indicate that the wide band approach, which is more complex but theoretically more appropriate pridicts smaller values of fatigue damages compared with those by the narrow band approach for all seastate conditions. Such trend becomes more apparent for the cases of severe seastates where the bandwidth of random stresses becomes large.

• Journal of Korean Institute of Industrial Engineers
• /
• v.3 no.2
• /
• pp.83-91
• /
• 1977

This paper investigates the reliability characteristics of a system consisting of a unit operating on-line and backed by n spares among which m units are kept "warm" as standbys ready to go on-line. The on-line unit has an arbitrary lifetime distribution, while the warm standbys have exponential failure time distributions. The Failed units are repaired and brought back to service. The cold spares do not fail while in storage. Solution of this extremely complicated queuing problem using a "renewal counting" approach is presented and extended to the situation where the warming-up takes non-negligible time. Finally, an approach to the economic system management is discussed, considering the long-run availability, cost of keeping spares and repair facility, and the associated cost of restarting the system, after a system failure. The model presented in this paper will have many applications including the determination of the spares inventory and the number of field spares to be "carried".

• Structural Monitoring and Maintenance
• /
• v.5 no.4
• /
• pp.429-443
• /
• 2018

Fatigue is a principal failure mode for steel structures, and it is still less understood than any other modes of failure. Fatigue life estimation of metal bridges is a major issue for making cost effective decisions on the rehabilitation or replacement of existing infrastructure. The fatigue design procedures given by the standard codes are either empirical or based on nominal stress approach. Since the fatigue life estimation through field measurements is difficult and costly, more researches are needed to develop promising techniques in the fatigue analysis of bridges through Finite Element Analysis (FEA). This paper aims to develop a methodology for the Fatigue life estimation of railway steel bridge using FEA. The guidelines of IIW-1823-07 were used in the development of the methodology. The Finite Element (FE) package ANSYS and the programming software MATLAB were used to implement this methodology on an Indian Railway Standard (IRS) welded plate girder bridge. The results obtained were compared with results from published literature and found satisfactory.

• Journal of the Korean School Mathematics Society
• /
• v.11 no.1
• /
• pp.97-115
• /
• 2008

In high school mathematics class, to subtract a number b from a, we add the additive inverse of b to a and to divide a number a by a non-zero number b, we multiply a by the multiplicative inverse of b, which is the formal approach for operations of real numbers. This article aims to give a connection between the intuitive models in middle school mathematics class and the formal approach in high school for teaching operations of negative integers. First, we highlight the teaching methods(Hwang et al, 2008), by which subtraction of integers is denoted by addition of integers. From this methods and activities applying the counting model, we give new teaching methods for the rule that the product of negative integers is positive. The teaching methods with horizontal mathematization(Treffers, 1986; Freudenthal, 1991) of operations of integers, which is based on consistently applying the intuitive model(number line model, counting model), will remove the gap, which is exist in both teachers and students of middle and high school mathematics class. The above discussion is based on students' cognition that the number system in middle and high school and abstracted number system in abstract algebra course is formed by a conceptual structure.

• Journal of Information Management
• /
• v.39 no.3
• /
• pp.95-113
• /
• 2008

In todays environment in which scientific technologies are changing very fast than ever, companies have to monitor and search emerging technologies to gain competitiveness. Actually many nations try to do that. Most of them use Dephi approach based on experts review as a searching method. But experts review has been criticised for probability of inclination and its derivative problems in the sense that it is accomplished only by expert's subjectivity. To overcome such problems, we used Scientometric Method for identifying emerging technology that had been done by Delphi as a rule. We made three particular efforts in order to improve the Quality of the result. Firstly, we selected one alternative database between SCI and Scopus hoping to see evenly-distributing results in wide fields on the front burner. Secondly we used Fractional citation counting in counting citation number in the stage of linear regression analysis. Lastly, we verified Scientometric result with experts opinions to minimize probable errors in a Scientometric research. As a result, we derived 290 emerging technologies from Scientometric analysis with Scopus Database, and visualized them on 2-dimension map with data mining system named KnowledgeMatrix which was developed by KISTI.

• School Mathematics
• /
• v.4 no.2
• /
• pp.205-222
• /
• 2002

In school mathematics, the negative numbers have been instructed using the intuitive models such as the number line model, the counting model, and inductive-extrapolation on the additionand multiplication and using inverse operation on the subtraction and division. Theseinstructions on the negative numbers did not present their formal nature and caused the difficulty for students to understand their operations because of the incomplete function of the intuitive models. In this study, we tried to improve such problems of the instructions of the negative numbers on the basis of the didactical phenomenological analysis. First of all, we analysed the nature of the negative numbers and the cognitive obstructions through the examination about the historic process of them. Second, we examined hew the nature of the negative numbers were analysed and described in mathematics. Third, we explored the improving directions for them on the ground of the didactical phenomenological analysis. In school mathematics, the rules of operations using the intuitive models of the negative numbers have been Instructed rather than approaching toward the nature of them. The negative numbers have been developed from the necessity to find the general solution of equations. The study tries to approach the operations instructions of the negative numbers formative]y to overcome the problems of those that are using the intuitive models and to reflect the formative Furthermore of the negative numbers. Furthermore, we examine the way of the instruction of the negative numbers in real context so that the algebraic feature and the real context should be Interactive.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.29-34
• /
• 2019

This paper presents a new method for construction of a static obstacle map. A static obstacle is important since it is utilized to path planning and decision. Several established approaches generate static obstacle map by grid method and counting algorithm. However, these approaches are occasionally ineffective since the density of LiDAR layer is low. Our approach solved this problem by applying probability theory. First, we converted all LiDAR point to Gaussian distribution to considers an uncertainty of LiDAR point. This Gaussian distribution represents likelihood of obstacle. Second, we modeled dynamic transition of a static obstacle map by adopting the Hidden Markov Model. Due to the dynamic characteristics of the vehicle in relation to the conditions of the next stage only, a more accurate map of the obstacles can be obtained using the Hidden Markov Model. Experimental data obtained from test driving demonstrates that our approach is suitable for mapping static obstacles. In addition, this result shows that our algorithm has an advantage in estimating not only static obstacles but also dynamic characteristics of moving target such as driving vehicles.

• Journal of the Korean Society of Visualization
• /
• v.14 no.3
• /
• pp.38-45
• /
• 2016

Separation of particles based on different sizes, detection of pathogenic bacteria and isolation of leukocytes from whole blood are typical applications of spiral or helical microchannels. The present study focuses on developing a CD4+ T-cell counting device for monitoring HIV/AIDS patients with the aid of a helical minichannel used for a sample cartridge. For the experiment, $10{\mu}m$ sized microbeads were used for visualization with a fluorescence imaging system. Alignment of microbeads was investigated in a stationary and spinning sample cartridge filled with glycerol-water mixtures of different densities. The helical minichannel was spun using a DC motor controlled by an Arduino board with a Bluetooth shield. It was found that when the sample cartridge was made stationary, no bead alignment was achieved for a medium with density (0% and 20% glycerol) lower than that of the beads, but when it was spun at 2000-3000 rpm for 1-4 min, an alignment was obtained at the top of the channel facilitating optical detection and enumeration of those microbeads. Since an alignment of microbeads was achieved for a medium with density as that of blood plasma, the same approach can be applied for aligning and counting CD4+ T-lymphocytes in whole blood samples collected from patients.

• Journal of Biosystems Engineering
• /
• v.38 no.1
• /
• pp.55-63
• /
• 2013

Purpose: The present study aimed at image processing methods for automatic cell pattern recognition and morphological analysis for tissue engineering applications. The primary aim was to ascertain the novel algorithm of adaptive brightness correction from microscopic images for use as a potential image analysis. Methods: General microscopic image of cells has a minor problem which the central area is brighter than edge-area because of the light source. This may affect serious problems to threshold process for cell-number counting or cell pattern recognition. In order to compensate the problem, we processed to find the central point of brightness and give less weight-value as the distance to centroid. Results: The results presented that microscopic images through the brightness correction were performed clearer than those without brightness compensation. And the classification of mixed cells was performed as well, which is expected to be completed with pattern recognition later. Beside each detection ratio of hBMSCs and HeLa cells was 95% and 92%, respectively. Conclusions: Using this novel algorithm of adaptive brightness correction could control the easier approach to cell pattern recognition and counting cell numbers.