• 한국작물학회지
• /
• 제40권1호
• /
• pp.39-43
• /
• 1995

남부지방의 목화 재배체계 및 안전다수확을 위한 지초자과를 얻고자 Vinyl 피복과 무피복 재배아래서 재식밀도 차이에 따른 생육, 수량 및 면모의 발생등을 검토하였던 바 다음과 같은 결과를 얻었다. 1. 경장, 결과피수, 삭수$m^2$당 삭수 등의 모든 형질이 Vinyl피복구에서 우수하였으며$m^2$당 삭수는 Vinyl피복구에서나 무피복구에서나 70${\times}$10cm재식에서 가장 우수하였다. 2. 실면수량과 1삭실면중 역시 Vinyl피복구에서 높았으며 실면수량은 Vinyl피복구와 무피복구 모두 70${\times}$10cm재식에서 가장 우수하였다. 3. 섬유장, 섬유비율 모두 Vinyl피복의 결과가 인정되었으며 섬유장은 주문거리가 넓을수록 길었다.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.19-28
• /
• 2010

This paper describes the compaction and strength behavior of black cotton soil (BC soil) reinforced with coir fibers. Coir used in this study is processed fiber from the husk of coconuts. BC soil reinforced with coir fiber shows only marginal increase in the strength of soil, inhibiting its use for ground improvement. In order to further increase the strength of the soil-coir fiber combination, optimum percentage of 4% of lime is added. The effect of aspect ratio, percentage fiber on the behavior of the composite soil specimen with curing is isolated and studied. It is found that strength properties of optimum combination of BC soil-lime specimens reinforced with coir fibers is appreciably better than untreated BC soil or BC soil alone with coir fiber. Lime treatment in BC soil improves strength but it imparts brittleness in soil specimen. BC soil treated with 4% lime and reinforced with coir fiber shows ductility behavior before and after failure. An optimum fiber content of 1% (by weight) with aspect ratio of 20 for fiber was recommended for strengthening BC soil.

• 복식
• /
• 제18권
• /
• pp.283-289
• /
• 1992

In this paper, dyeing properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same liquor-goods ratio, in case of green dyes, colorfastness to light was similar for three fibers but in case of red dyes, cotton had a lower level. For colorfastness to laundering, there fibers were similar and three were no consistent differences. The degree of stain about white cotton fabric was higher in case of red dyes and it showed the difference of dye's properties. The degree of stain about white wool fabric showed the highs resistance or stain and little stain was seen. This result represented that the dyes. used were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was consistently brighter and the shade of ramie was darker than that of cotton and flax. This might mean that optical effects arose from the comparatively large cross-sectional size of the ramie fiber and its highly oriented structure.

• 한국생활과학회지
• /
• 제7권2호
• /
• pp.75-80
• /
• 1998

In this paper, deying properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same dyeing bath ratio, in case of green dyes, colorfastness to light was similar for three fabrics but in case of red dyes, cotton had a lower level. For colorfastness to laundering, three fabrics were similar and there were no consistent differences. The degree of stain about white fabric cotton was highest in case of red dyes. The degree of stain about white fabric wool showed the high resistance of stain and little stain was seen. This result represented that the used dyes were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was cosistently brighter and the shade of ramie was darker than of cotton and flax. This might mean that optical effects arouse from the comparatively large cross-sectional size of the ramie fiber and its highly ordered structure.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.173-182
• /
• 2001

The physical properties and biodegradability of cellulose fabrics, such as cotton and rayon, are expected to vary with textile care. In this study cotton and rayon fabrics were washed repeatedly with detergents, bleaches, or softeners. The changes of physical properties were investigated by measuring retention of breaking strength, shrinkage, handle, and the fiber surface was observed by SEM. The biodegradability of fabrics was also estimated by soil burial test. The results were as follows. Cotton fabrics laundered repeatedly by detergents and bleaches lost virtually no strength. The breaking strength of the rayon fabrics decreased by about 17%∼25% after repeated launderings. Shrinkage in weft direction was much larger than that in warp direction. Bending rigidities of both fabrics decreased remarkably within 10 wash cycles. Shear rigidity in cotton fabrics increased continuously with repeated washing cycles, however, that in rayon fabrics did not show any change as washing went on. Friction coefficient increased in both fabrics after 10 wash cycles, and this is thought to be attributed to the wrinkle, interlocking of hairs, surface damage resulted from repeated washings. In cotton fabrics made of staple yarns, short hairs on the yarn surface entangled together with repeated launderings. This resulted in the continuous increase in % shrinkage, shear rigidity, friction coefficient. Rayon fabrics made of filament yarns, however, did not show this phenomenon. Softener treated fabrics showed the lowest values in bending rigidity, shear rigidity and friction coefficient because the cationic surfactants adsorbed on the fiber surface behaved like lubricants. The biodegradability of fabrics was noticeably affected by the composition of washing solutions. The fabrics washed with detergents and bleaches were decomposed faster than those washed with the others were and the cotton fabrics washed with detergents and softeners hardly degraded. The fabrics soiled with milk were decomposed almost completely and those soiled with Palmitic acid did not degrade greatly.

• 한국지역사회생활과학회지
• /
• 제27권4호
• /
• pp.795-801
• /
• 2016

This study was conducted to suggest the best union fabric to combine with cellulose fiber for summer and in-between seasons. Four types of union fabric, viz. silk/flax, silk/cotton, rayon/flax and rayon/cotton, were used as sample fabrics after weaving them in a local textile factory. The air permeability, moisture regain, water absorption, water vapor permeability and thermal insulation of the samples were tested. The results are as follows. The rayon/flax union fabric is the most suitable for summer clothes due to its having the best comfort property of air and water vapor permeability, and moisture and water absorption. For in-between seasons, it is recommended to use the silk/cotton union fabric because of its good thermal insulation properties.

• 패션비즈니스
• /
• 제7권4호
• /
• pp.57-66
• /
• 2003

Cochineal dyeing was applied to natural fiber fabrics, cotton and silk fabrics, and synthetic fiber fabrics, nylon and polyester fabrics. Chitosan-pretreatment was applied to the fabrics in order to investigate the effect of chitosan treatment on the dyeing behavior. The effect of chitosan treatment on the mordanting was also investigated by incorporating Cu-mordant on the chitosan-treated or chitosan-untreated fabrics during the dyeing process.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1991년도 제1차 학술발표초록집
• /
• pp.19-19
• /
• 1991

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.309-312
• /
• 2001