• Journal of the Korean Society for information Management
• /
• v.20 no.4 s.50
• /
• pp.159-193
• /
• 2003

This study is a case study that attempt to quantify the economic efficiency of 'digital library program(DLP) of the National Library of Korea' by means of cost-benifit analysis. Results indicate that the B/C ratio is 1.70 which can be interpreted the economic efficiency of DLP is very high. Of particular significance is the fact that this study empirically proves that the digital library program is economically efficient.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.366-369
• /
• 2017

This work presents a detailed study of several parameters on the spray coating method for fabricating a flexible cantilever. Conventionally, spin coating method have been widely used in the microelectromechanical system (MEMS) fabrication process. However, the major drawback of this method is the difficulties in protecting various topography with photoresist film, particularly when the device is manufactured in high aspect ratio. It is also a challenging process to form a small pattern in the etched area. On the other hand, the commercial spray coating systems are not advantageous from an economic perspective and the technique is also providing less efficient. In order to solve these issues, we have developed a manual spray coating system which can be efficiently used by combining the accessories available in the laboratory. The developed spray coating system consists of a spin-coater, motorized stage, a spray gun with the capable of controlling centrifugal force, injection amount, injection angle, and spray range. The major advantage of the proposed spray coating system is its reasonable fabrication cost. Secondly, the system can be easily disassembled after finishing the coating experiment. Owing to the mentioned advantages, we sincerely believe that the proposed spray coating system can be effectively used in many related applications.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.557-564
• /
• 2002

Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.227-232
• /
• 2002

Enormous flocks by the reduced life cycle of products caused by the technological innovation if later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• Journal of Korea Foundry Society
• /
• v.31 no.4
• /
• pp.205-211
• /
• 2011

Al-Si alloys have been steadily used as a potential material for the achievement of an efficient weight reduction in the automobile and aerospace industries due to its excellent castability and high strength-to-weight ratio. In this study, riser effect and mechanical properties were investigated according to the size of the sleeve. In addition, the effects of riser size on mechanical properties of castings were investigated. On the other hand flow and solidification process were simulated with a hybrid FDM/FEM package named ZCast. As a result, results of simulation and experiments were comparable regarding to the yield strength, tensile strength, elongation and hardness of casting. It proves the reliability of the simulation. It is expected that the proper size of riser can improve the recycling rate of metallic materials and reduce the cost of casting.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.33-43
• /
• 2003

Enormous stocks by the reduced life cycle of products caused by the technological innovation in later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.145-151
• /
• 2010

It seems that a primary concern of the project-based company, which provides a large scale product or service over long term period, is to run a successful project through systematic project process control and control costs. One of the typical project control methods is Earned Value Management System(EVMS) which analyses the precess through performance measurement. Even though the EVMS is a highly efficient tool in the managerial aspect, it cannot easily determine the Planned Value(PV), Actual Cost(AC), or Earned Value(EV) due to the indistinct criteria and extensive data. The accurate calculation of AC in particular, is the basic of project management, but most companies record direct personnel expenses or direct expenses only. Since they calculate indirect expenses based on the estimated ratio, it limits the systematic project management that reflects changes in profit and loss of a company. This study introduces a EVMS for project management and its actual case based on EVMS and ERP system which some additional modules are installed for performance measurement. It is expected that this new method enables a company to save time and effort, and also to improve transparency by specifying expense items in detail and to switch quarterly settlement to monthly by reducing the time of calculation.

• Carbon letters
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2015

In recent years, flame synthesis has absorbed a great deal of attention as a combustion method for the production of metal oxide nanoparticles, carbon nanotubes, and other related carbon nanostructures, over the existing conventional methods. Flame synthesis is an energy-efficient, scalable, cost-effective, rapid and continuous process, where flame provides the necessary chemical species for the nucleation of carbon structures (feed stock or precursor) and the energy for the production of carbon nanostructures. The production yield can be optimized by altering various parameters such as fuel profile, equivalence ratio, catalyst chemistry and structure, burner configuration and residence time. In the present report, diffusion and premixed flame synthesis methods are reviewed to develop a better understanding of factors affecting the morphology, positioning, purity, uniformity and scalability for the development of carbon nanotubes along with their correlated carbonaceous derivative nanostructures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.712-721
• /
• 2012

In this paper, we propose an Enhanced cross-layer Geographic Forwarding (EGF) protocol for wireless sensor networks (WSNs). EGF uses an optimal back-off time to make the packet forwarding decisions using only source and destination's location information and energy cost without information about neighbor nodes' location or the number of one hop neighbor nodes. EGF is also a cross-layer protocol by combining efficient asynchronous MAC and geographic routing protocol. The proposed protocol can find optimal next hop location quickly without broadcasting node's location update and with minimizing overhead. In our performance evaluation, EGF has better performance in terms of packet success ratio, energy efficiency and end-to-end delay in wireless sensor networks.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.51-60
• /
• 2018

In Long Term Evolution (LTE) cellular networks, the transmit power control (TPC) mechanism consists of two parts: the open loop (OL) and closed loop. Most cellular networks consider OL/TPC because of its simple implementation and low operation cost. The analysis of OL/TPC parameters is essential for efficient resource management from the cellular operator's viewpoint. In this work, the impact of the OL/TPC parameters is investigated for homogeneous small cells and heterogeneous small-cell/macrocell network environments. A mathematical model is derived to compute the transmit power at the user equipment, the received power at the eNodeB, the interference in the network, and the received signal-to-interference ratio. Using the analytical platform, the effects of the OL/TPC parameters on the system performance in LTE networks are investigated. Numerical results show that, in order to achieve the best performance, it is appropriate to choose ${\alpha}_{small}=1$ and $P_{o-small}=-100dBm$ in a homogenous small-cell network. Further, the selections of ${\alpha}_{small}=1$ and $P_{o-small}=-100dBm$ in the small cells and ${\alpha}_{macro}=0.8$ and $P_{o-macro}=-100dBm$ in the macrocells seem to be suitable for heterogeneous network deployment.