• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.55-61
• /
• 2011

Battery cases have been made of polypropylene and its warpage is relatively large due to the crystalline characteristic of polypropylene. In this study, the battery case when the injection mold used to improve the Gate by simplifying the process of production cost savings and focus on improving the quality of molding CAE analysis was carried out. The result could be produced in plastic and products of the imbalance in the flow and deformation and to predict reliability of the product will contribute to reduced scrap.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.641-656
• /
• 2015

Using large monopod bucket foundations as an alternative to monopiles for offshore wind turbines offers the potential for large cost savings compared to typical piled foundations. In this paper, numerical simulations are carried out to assess the risk of structural buckling during installation of large-diameter bucket foundations. Since shell structures are generally sensitive to initially imperfect geometries, eigenmode-affine imperfections are introduced in a nonlinear finite-element analysis. The influence of modelling the real lid structure compared to classic boundary conditions is investigated. The effects of including soil restraint and soil-structure interaction on the buckling analysis are also addressed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.3
• /
• pp.2716-2725
• /
• 1972

Side channel spillways based on Hinds theory were tested. Surface water level at the beginning point of side channel is the same as the crest level of weir in the usual design. Here, side channel section were moved upwards $\frac{1}{2}$ of the total head on the crest and test(revised experiment) were made. In the revised experiments, coefficients of discharge for design flood (Q) were the same with that of original design experiments. In case of 1.2Q a little influence of submergence were appeared, coefficients of discharge were decreased to be about 97.6% of that of original design experiments, therefore, Reservoir flood water level become higher about 2-3cm than original case. So revised design can be used for actual purpose and it will brings much savings in construction cost of side channel spillway.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.173-198
• /
• 1996

Distribution of farm produce in Korea is known to be inefficient due to the numerous stages that exist in the distribution channel. This has resulted in dissatisfaction for both farmer and consuers; farmers sell their produce at low prices to middlemen while consumers pay high prices for them because of price increases that occur in the distribution chain. We apply Spengler's theory of double marginalization to show that price increases are inevitable as the length of the farm distribution chain increases. We then show that the negative effects of double marginalization can be contained by setting up a physical distribution center. The physical distribution center effectively reduces the stages in the distribution from 5 or 6 stages to 3 or 4 stages. We also lay out the design and major characteristics of the distribution center, as well as the expected cost savings.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.2
• /
• pp.264-266
• /
• 2000

A new GFP-based T-vector for cloning of PCR products was developed by using a green fluorescent protein (GFP) as a mafker. In order to facilitate the DNA inserts, multiple restriction sites, SP6 and T7 RNA polymerase promoter sites, were introduced close to the PCR DNA insertion site of a pCRGv vector. The XcmI-digested pHNT plasmid can be used to clone a 3' A-overhanged PCR DNA amplified by Taq DNA polymerase. A potential method of easing some difficulties from its use along with its cost savings proveded by this vector are likely to lead to the replacement of other T-vectors for PCR DNA cloning.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.169-175
• /
• 2002

World demand for natural gas has generated the need for many new land transmission pipelines to be installed in the next decade or so. Although mechanized gas metal arc welding is well developed, there are opportunities for cost savings by using alternative welding processes. Hybrid Nd:YAG laser - gas metal arc welding enables fibre optic delivery of the laser energy to a robotic welding head to be combined with the addition of extra energy and a consumable to produce good quality, deep penetration welds in a single pass. The present paper describes initial procedure development to optimize the laser and gas metal arc welding parameters for making joints in pipeline steel. Satisfactory joint quality was obtained and it is intended to develop the process to prototype field trials.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.99-100
• /
• 2015

거래 시 발생하는 잔돈들로 인해 이용자들은 소지의 불편함이 있고 서랍속에서 잠자고 있는 동전들로 인해 연간 수억 원의 동전 발행 비용이 발생하고 있다. 본 시스템은 스마트 기기들을 이용한 사용자들을 대상으로 잔돈을 적립하여 기부하기, 선물하기, 구매하기 등의 시스템을 설계하고 이를 테스트하였다. 본 시스템은 기본적인 잔돈 적립 및 소비 기능 외에 가맹점이 확보되지 않은 상태에서 사용자 앱을 테스트할 수 있도록 설계한 부분과 SNS와 연계되어 커뮤니티를 활용할 수 있다는 것이 특이점이다. 본 시스템을 통해서 이용자들의 편의성과 만족, 동전 발행이라는 사회적 비용 절감, 기부문화의 확산 등을 기대하고 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.105-110
• /
• 2015

In this study, a high-speed procedure to be used in composite molding technology is developed for the production of a hybrid supercapacitor in a progressive and revolutionary current in a production system, as are the related operating conditions. Mold parts with solid modeling, the ease of programming of future mold product designs, tolerance management, and pre-explode tests by the building of a progressive die design system using Cimatron_E10 Die Design Software for the strip layout are done. The capacity of the super-hybrid composite mold design will save time and money through its verification of the manufacture of molds. We plan to apply this to future related products for production cost savings of more than 30% achieved by considering the components of the production costs, labor, and material costs of production as compared to conventional production methods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1065-1072
• /
• 2010

Case studies published in Korea versus the low ground fault is applied on the bridge based on theory or experience in the design of pile bearing capacity by the value of the expression is designed to conduct field tests Disclosure Load bearing capacity value, the result of applying a reasonable construction cost savings of approximately 10 eokyeowon Has, in the design of site investigation was insufficient to require additional efforts. Apply the appropriate value from the extra support in the design of accurate ground survey and air speed to cut the budget and social technology can ensure the reliability was unknown.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.692-700
• /
• 2007

There are several types of foundations for light-weight structures, such as low story buildings, on soft clay deposits. Those foundations, such as piled raft, compensated foundation, mat foundation, floating foundation are commonly used rather then end-bearing piles to get more benefits on the construction and cost savings. In this study, settlement behaviors are computed and compared for several types of foundations on soft clay deposits. Also, theoretical expressions of parameters for piled raft system were provided with co-relations for design purposes. The predictions of settlements of piled rafts foundation are proposed based on the pile dimensions and design loads. From this study, the piled raft foundations is more benefits for reducing the settlement of clay deposits, and it is found that the piled raft system is applicable and effective on thick clay deposits, and that differential settlements of the foundation should be managed by designing the configuration of pile lengths.