• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.923-926
• /
• 2004

Active-matrix field emission display (AMFED) based on carbon nanotube (CNT) emitter and amorphous silicon thin-film transistor (a-Si TFT) is reviewed. The AMFED pixels consisted of a high-voltage a-Si TFT and mesh-gated CNT emitters. The developed AMFED panel showed a high performance with a driving voltage of below 15 V. The low-cost and large-area AMFED approach with a metal mesh technology will be discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.108-111
• /
• 2004

The polypropylene(PP) fiber is poised as a low cost alternative for reinforcement in structural applications in comparison with other high performance fibers, such as the polyvinyl-alcohol(PVA), polyethylene, carbon and aramid fiber. The mechanical properties of the composite are strongly determined by the interfacial behavior of fiber and cementitious matrix. The crack bridging mechanism contribute to composite toughness from activation of the fiber-matrix interface where energy is dissipated through debonding of the interface and fiber pullout. In this study, therefore, the pullout behavior of PP fibers is investigated. Experimental work includes the investigation of the interfacial properties, and the composite property. The quantification of interfacial properties, the frictional bond is achieved through single fiber pullout test. A study on the effect of inclination angle on fiber pullout behavior is also conducted.

• 대한음성학회지:말소리
• /
• 제66호
• /
• pp.105-116
• /
• 2008

In this research, we propose a speaker identification system using a kernel method which is expected to model the non-linearity of speech features well. We have been using principal component analysis (PCA) successfully, and extended to kernel PCA, which is used for many pattern recognition tasks such as face recognition. However, we cannot use kernel PCA for speaker identification directly because the storage required for the kernel matrix grows quadratically, and the computational cost grows linearly (computing eigenvector of $l{\times}l$ matrix) with the number of training vectors I. Therefore, we use greedy kernel PCA which can approximate kernel PCA with small representation error. In the experiments, we compare the accuracy of the greedy kernel PCA with the baseline Gaussian mixture models using MFCCs and PCA. As the results with limited enrollment data show, the greedy kernel PCA outperforms conventional methods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1066-1071
• /
• 2002

The use of frequency-dependent spectral element matrix (or exact dynamic stiffness matrix) in structural dynamics is known to provide very accurate solutions, while reducing the number of degrees-of-freedom to resolve the computational and cost problems. Thus, in the present paper, the spectral element model is formulated for the axially moving Timoshenko beam under a uniform axial tension. The high accuracy of the present spectral element is then verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension on the vibration characteristics, the dispersion relation, and the stability of a moving Timoshenko beam are investigated, analytically and numerically.

• Journal of Astronomy and Space Sciences
• /
• 제25권3호
• /
• pp.255-266
• /
• 2008

The current paper presents application of a new analytic solution in general relative motion to spacecraft formation flying in an elliptic orbit. The calculus of variations is used to analytically find optimal trajectories and controls for the given problem. The inverse of the fundamental matrix associated with the dynamic equations is not required for the solution in the current study. It is verified that the optimal thrust vector is a function of the fundamental matrix of the given state equations. The cost function and the state vector during the reconfiguration can be analytically obtained as well. The results predict the form of optimal solutions in advance without having to solve the problem. Numerical simulation shows the brevity and the accuracy of the general analytic solutions developed in the current paper.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1617-1623
• /
• 1989

The introduction of the fast Fourier transform(FFT),an efficient computational algorithm for the discrete Fourier transform(DFT) by Cooley and Tukey(1965), has brought to the limelight various other discrete transforms. Some of the analog functions from which these transforms have been derived date back to the early 1920's, for example, Walsh functions (Walsh, 1923) and Hadamard Transform(Enomoto et al, 1965). Fast algorithms developed for the forward transform are equally applicable, exept for minor changes, to the inverse transform. In this paper, we present a simple pipelined Hadamard matrix(HM) which is used to develop a fast algorithm for the Hadamard Processor (HP). The Fast Hadamard Transform(FHT) can be derived using matrix partitioning techniques. The HP system is incorporated through a modular design which permits tailoring to meet a wide range of video data link applications. Emphasis has been placed on a low cost, a low power design suitable for airbone system and video codec.

• 식품기술
• /
• 제10권1호
• /
• pp.115-120
• /
• 1997

면역분석법(immunoassay)은 aflatoxin류, deoxynivalenol(DON), zearalenone(ZEA), fumonisin류 등을 포함하는 다양한 진균독소분석에 적용되고 있다. 이들 분석법을 이용하여 여러 종류의 matrix내에 존재하는 물질들을 분석할 수 있다. 그리고 많은 시료를 빨리 분석해야 하는 경우에 이 방법이 적용되고 있다. 상업적인 면역화학적 분석키트들은 흔히 검출감도(sensitivity), 특이성(specificity), 재현성(reproducibility), 비용(cost), 안정성(stability), 편리성(ease of use)등의 관점에서 평가된다. 실험실적으로 품질보증을 위하여 표준곡선과 양성대조구 등에 대한 사전 검토가 필수적이다. 또한 높은 농도의 분석물의 경우에는 matrix에서 기인한 간섭때문이 아닌지를 구분하는 것도 중요하다. 본문에서 곡류와 곡류가공품 및 특정의 감시대상물 질내 aflatoxin류, DON, ZEA 그리고 fumonisin류와 같은 진균독소의 분석에 면역화학적 방법을 사용하여 얻어진 공동연구의 결과에 대한 해석기준이 제시된다. 또한 yes/no로 구분해야 하는 정성시험의 결과해석에 필요한 기준이 제시된다. 진균독소의 면역분석법을 평가하기 위한 몇몇기준들과 그 방법들을 감시도구로 사용하는 예는, 식품중의 잔류농약을 검출하기 위한 접근방법과 유사한 모델로서 활용될 수 있을 것이다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.34-41
• /
• 2005

Generally, it is not easy to get a suitable controller for multi variable systems. If the modeling equation of the system can be found, it is possible to get LQR control as an optimal solution. This paper suggests an LQR learning method to design LQR controller without the modeling equation. The proposed algorithm uses the same cost function with error and input energy as LQR is used, and the LQR controller is trained to reduce the function. In this training process, the Jacobian matrix that informs the converging direction of the controller Is used. Jacobian means the relationship of output variations for input variations and can be approximately found by the simple experiments. In the simulations of a hydrofoil catamaran with multi variables, it can be confirmed that the training of LQR controller is possible by using the approximate Jacobian matrix instead of the modeling equation and this controller is not worse than the traditional LQR controller.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1653-1660
• /
• 2003

The use of frequency-dependent spectral element matrix (or exact dynamic stiffness matrix) in structural dynamics is known to provide very accurate solutions, while reducing the number of degrees-of-freedom to resolve the computational and cost problems. Thus, in the present paper, the spectral element model is formulated for the axially moving Timoshenko beam under a uniform axial tension. The high accuracy of the present spectral element is then verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension on the vibration characteristics, the dispersion relation, and the stability of a moving Timoshenko beam are investigated, analytically and numerically.