• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.314-319
• /
• 2011

Energy Cost has been rapidly increased with the internal heat gain of data center to keep the temperature condition. But the cooling units for server systems are fully operated to satisfy the indoor temperature condition, it results in the excessive energy consumption. In this study, various cooling systems were studied for data center and cold aisle containment system was proved to be the best solution for server cooling system. Because it protects the cooling zone from the hot aisle space. Effective cooling and prohibition of recirculation air from hot aisle was possible by the cold aisle containment system.

• Journal of Preventive Medicine and Public Health
• /
• 제19권1호
• /
• pp.1-15
• /
• 1986

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.46-52
• /
• 2019

This work proposes a noncontact ultrasonic transducer for detecting wall-thinning of containment liner plates of nuclear power plants by measuring their thickness without physical contact. Because the containment liner plate is designed to prevent atmospheric leakage of radioactive substances under severe nuclear accident, its wall-thinning inspection is important for safety of nuclear power plants. Wall-thinning investigation of containment liner plates have been carried out by measuring their thickness with contact-type ultrasonic thickness gauge by inspectors and needs a lot of time and cost. As an alternative, an electromagnetic acoustic transducer measuring precisely thickness of containment liner plates without any physical contact or couplant was suggested in this research. A transducer generating and measuring shear ultrasonic waves in thickness direction was designed and wave field produced by the transducer was analyzed to verify the design. The working performance of the suggested transducer was tested with carbon steel plate specimens with various thicknesses. The test result shows that the proposed transducer can measure thickness of the specimens precisely without any couplant and implies that swift scanning of wall-thinning of containment liner plates will be possible with the proposed transducer.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.653-660
• /
• 2015

Technologies for reducing construction duration are key factors in nuclear power plant construction projects, as a reduction in construction duration at the construction phase leads to a reduction in construction cost and an increase in profits through the early operation of the nuclear power plant. To analyze the constructability of the height of single-layer placement of formwork for the Reactor Containment Building (RCB) exterior wall through lateral pressure according to the height of concrete placement, the deformation criteria for formwork, and a new form design, 'MIDAS GEN (hereinafter referred to as MIDAS)' is used in this study. The cost and workload of formwork are derived according to the unit of height of the RCB exterior wall. Based on the result, it was found that the higher the RCB exterior wall, the higher the material cost, and the less the construction duration and the less the total number of formwork layers. Based on this result, it is believed that the material cost and the construction duration can be appropriately determined according to the formwork height.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1005-1014
• /
• 2009

The Dual Unit Optimizer 2000 MWe (DUO2000) is put forward as a new design concept for large power nuclear plants to cope with economic and safety challenges facing the $21^{st}$ century green and sustainable energy industry. DUO2000 is home to two nuclear steam supply systems (NSSSs) of the Optimized Power Reactor 1000 MWe (OPR1000)-like pressurized water reactor (PWR) in single containment so as to double the capacity of the plant. The idea behind DUO may as well be extended to combining any number of NSSSs of PWRs or pressurized heavy water reactors (PHWRs), or even boiling water reactors (BWRs). Once proven in water reactors, the technology may even be expanded to gas cooled, liquid metal cooled, and molten salt cooled reactors. With its in-vessel retention external reactor vessel cooling (IVR-ERVC) as severe accident management strategy, DUO can not only put the single most querulous PWR safety issue to an end, but also pave the way to very promising large power capacity while dispensing with the huge redesigning cost for Generation III+ nuclear systems. Five prototypes are presented for the DUO2000, and their respective advantages and drawbacks are considered. The strengths include, but are not necessarily limited to, reducing the cost of construction by decreasing the number of containment buildings from two to one, minimizing the cost of NSSS and control systems by sharing between the dual units, and lessening the maintenance cost by uniting the NSSS, just to name the few. The latent threats are discussed as well.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.342-347
• /
• 2015

플로팅 엘엔지선박은 해상에서 LNG 생산 및 천연 가스 공급을 담당하는 새로운 개념으로 부유식 생산설비는 과도한 투자 비용으로 인해 개발 지연중인 한계 가스전에 활력을 주고 있으며, 부유식 공급설비는 육상 LNG 인수기지 인프라가 미비한 지역에 에너지를 경제적이며 효과적으로 공급할 수 있다는 장점을 제공하고 있다. LNG 화물창은 플로팅 엘엔지선박에서 생산 또는 적재된 LNG를 보관하는 주요기능 중 하나이다. 본 연구를 통해 기존 화물창 시스템들의 장점을 결합한 복합 화물창 시스템을 화물창 시스템의 설계 개선방안으로 제안하였고 플로팅 엘엔지선박에의 적용 타당성에 대한 연구를 수행하였다.

• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.425-431
• /
• 2015

1978년에 고리 1호기의 건설이 완공된 이래로 원자력 발전 플랜트의 건설 프로젝트는 국내 외로 점차 확대되고 있다. 그러나 일부 원자력 발전 플랜트의 건설 현장에서는 리스크 관리 능력의 부족으로 인하여 공기 지연과 공사비 손실의 문제점들을 가지고 있다. 특히, 원자력 발전 플랜트 내 원자로격납건물의 시공은 타 시공 단계에 비해 긴 공정기간으로 인하여 전문기술과 대규모 자원이 요구됨에 따라 많은 리스크 요인들이 산재될 수 있다. 따라서 원자로격납 건물의 시공에서 예상되는 리스크 요인들을 분석하여 전체 프로젝트의 안정적인 수행 방향을 제시하는 연구가 필요하다. 그러므로 본 연구는 원자로격납건물 시공의 리스크 요인들을 평가하고자 한다. 이를 위하여 본 연구는 36명의 소수 전문가 집단을 대상으로 하는 설문조사방법을 활용하였다. 24개의 리스크 요인들은 공정, 원가, 안전, 품질을 기준으로 분류되었으며, 이에 대한 평가 결과는 계층 분석방법을 활용하여 분석하였다. 이를 바탕으로 각 기준별로 분류된 리스크 요인들은 중요도와 우선순위를 산정하고 원자력 발전 플랜트의 시공 리스크 요인을 분석하는데 계층분석 방법의 적용성을 확인하였다. 본 연구의 결과는 원자로격납건물의 시공 단계에서 리스크 관리를 위한 기초 자료로 활용될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제16권4호
• /
• pp.217-223
• /
• 1984

본 연구에서는 냉각수 상실사고(LOCA)시 격납용기내의 수소농도를 제어하기 위해 수소재결합기 없이 수소 퍼지계통만을 사용할 때의 타당성을 분석하였다. 이 타당성 연구를 위해 격납응기내의 수소농도, 수소퍼지 계통의 수소제거, 그리고 퍼지로 인한 추가소외 선량이 계산되었다 또한 비용-편익 개념을 사용하여 수소 재결합기 계통(2대의 재결합기 설치)의 경제성을 분석하였다. 분석결과, 수소퍼지 계통은 수소 재결합기 없이도 수소농도를 제어하기에 충분하며, 10 CFR 100에 있는 선량 제한치를 만족시키고 있었다. 비용-편익 개념에 의하면 수소 재결합기 계통은 동일부지내에 있는 4∼6기의 발전소에 공용될 때 경제성이 있는 것으로 입증되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 2000

Faults detection and containment requirements are typically allocated from a top-level specification as a percentage of total faults detection and containment, weighted by failure rate. This faults detection and containments are called as a fault coverage. The fault coverage requirements are typically allocated identically to all units in the system, without regard to complexity, cost of implementation or failure rate for each units. In this paper a simple methodology and mathematical model to support the allocation of system fault coverage rates to lower-level units by considering the inherent differences in reliability is presented. The models are formed as a form of constrained optimization. The objectives and constraints are modeled as a linear form and this problems are solved by linear programming. It is identified by simulation that the proposed solving methods for these problems are effective to such requirement allocating.

• Journal of Preventive Medicine and Public Health
• /
• 제22권4호
• /
• pp.542-554
• /
• 1989

The skyrocketing inflation of medical costs has become a major health problem among most developed countries. Korea, which recently covered the entire population with National Health Insurance, is facing the same problem. The proportion of health expenditure to GNP has increased from 3% to 4.8% during the last decade. This was remarkable, if we consider the rapid economic growth during that time. A few policy analysts began to raise cost containment as an agenda, after recognizing the importance of medical cost inflation. In order to Prepare an appropriate alternative for the agenda, it is necessary to find out reasons for the cost inflation. Then, we should focus on the reasons which are controllable, and those whose control are socially desirable. This study is designed to articulate the theory of medical cost inflation through literature reviews, to find out reasons for cost inflation, by analyzing aggregated data with a deterministic model. Finally to identify determinants of changes in both medical demand and service intensity which are major reasons for cost inflation. The reasons for cost inflation are classified into cost push inflation and demand pull inflation, The former consists of increases in price and intensity of services, while the latter is made of consumer derived demand and supplier induced demand. We used a time series (1983-1987), and cross sectional (over regions) data of health insurance. The deterministic model reveals, that an increase in service intensity is a major cause of inflation in the case of inpatient care, while, more utilization, is a primary attribute in the case of physician visits. Multiple regression analysis shows that an increase in hospital beds is a leading explanatory variable for the increase in hospital care. It also reveals, that an introduction of a deductible clause, an increase in hospital beds and degree of urbanization, are statistically significant variables explaining physician visits. The results are consistent with the existing theory, The magnitude of service intensity is influenced by the level of co-payment, the proportion of old age and an increase in co-payment. In short, an increase in co-payment reduced the utilization, but it induced more intensities or services. We can conclude that the strict fee regulation or increase in the level of co-payment can not be an effective measure for cost containment under the fee for service system. Because the provider can react against the regulation by inducing more services.