This study aims to provide basic data for elderly health insurance policy and medical radiation safety management by analyzing the general radiography usage and exposure dose of the elderly in Korea. The effective dose for each general radiography was calculated using the ALARA-GR program for 260 general radiography codes selected from 'National Health Insurance Care Benefit Cost'. The usage of general radiography was analyzed in the 2016 elderly patient data of the Health Insurance Review and Assessment Service, and the effective dose for each general radiography was applied. The general radiography usage and exposure dose per person aged 65 years and over was 6.47 cases and 0.56 mSv. Females showed higher value than males as 7.15 cases and 0.66 mSv(p<.001). By age, those between 75 and 79 showed the highest number as 6.97 cases and 0.62 mSv(p<.001). Those who were supported by Medical Aid showed higher value than those who were insured by National Health Insurance as 8.82 cases and 0.76 mSv(p<.001). In addition, the ratio by radiography was in the order of Chest 20.85%, Knee Joint 15.58%, and L-spine 14.67%, and the exposure dose was L-spine 29.40%, Chest 15.82%, Abdomen 7.97%, and Entire Spine 7.20%. General radiography, which is widely used due to the high frequency of diseases in the elderly population should be taken into consideration when establishing health insurance policies. In addition, it is necessary to check whether the general radiography with high exposure dose is performed as a routine examination without considering medical necessity.
Park, Samjoon;Noh, Sungkyu;Lee, Kwanwoo;Park, ByungSu;Nam, Seongho
KIPS Transactions on Software and Data Engineering
/
v.10
no.7
/
pp.251-256
/
2021
Software Product Line Engineering (SPLE) has been known as an efficient and effective software reuse methodology. One of the key activities of SPLE is scoping analysis, which determines the range of the features to be developed as reusable assets. Although several scoping methods has been reported, they are not sufficient to apply them to the defense domain. In this paper, we present a scoping method applicable to the defense domain, and present a case study for applying SPLE to inertial navigation weapon system. At first, the proposed method determines the range of candidate features to be applied for the platform. The range is then adjusted from the perspective of product benefit. The final range of features is decided through considering the total cost of a product line. We will demonstrate and evaluate the applicability of the proposed method by showing how we can decide the scope of features to be engineered for the navigation software product line.
A valuation of air pollution is critical for relevant policy-making for the public and research direction. This study conducted a willingness-to-pay (WTP) survey using contingent valuation method (CVM) in Seoul Korea. In detail, this study puts an emphasis on its temporal changes referred on two surveys conducted in 2014 and 2019. In reference to the previous studies in 2002, our survey indicated that the public awareness of air pollution and interests on its sources and solutions increased noticeably. Our survey showed that WTP increased significantly from 2588 to 4827 and 8240 Korean Won $month^{-1}$ in 2002, 2014, and 2019, respectively. Moreover, the percentage of respondents to pay the WTP also increased from 48% to 68% and 79% in 2002, 2014, and 2019, respectively. Our analysis based on the number of Google search on particulate matters (PMs) strongly suggests that such the noticeable increases of the public attention to air pollution is well accorded with the moment of the announcement of a standard for ultra-fine particles and the start of PM prediction in late 2013. But the Google search rate grew about 16.7 times in 2009 compared to 2014, which is much larger than the growth rate of interest and WTP between 2014 and 2019. Our results shed light on policy decision for the right person in the right place on the right time in the era of air pollution.
To understand modern society, I think we should know both public records and corporate records. However, the business archives are in private sector for their great importance of current value. The corporates expect cost-benefit effect, management of the business archives are relatively inferior. In this article, I would study the archival management in the POSCO, a similar public corporation, through the archival theory and the research papers for the business archives management in the United States. I examined the POSCO's records category and management department to prescribe in the POSCO's related rules. And I map out organizational status of the POSCO Museum in the POSCO I examined activities of the POSCO's archives acquisition method about the records which left out the records management rules, unavoidably scattered and lost, or the records related the POSCO are created outer the corporation. I made up arrangement scheme of the archives with it and gave the code to mix the character and the figure. In accordance with the arrangement scheme of archives, I extracted the description elements of organizational structure and function and of real records. The former is guide level and the latter is in detail. The POSCO Museum used the business archives to publish the corporate history and to exhibit, but in another corporation, usage of the business archives was various, it is contacted current activities of the corporation. Through the case study, the archivist in the corporate archives developed the contemporary values to use the archives of the corporation. And I presented the potential of the POSCO's Museum to become corporate archives in the POSCO.
Kim, Hyeok-Jung;Jang, Seung-Yup;Yoon, Yong-Sik;Kwon, Seung-Jun
Journal of the Korea Institute of Building Construction
/
v.18
no.6
/
pp.533-541
/
2018
Chloride attack, one of the major deterioration phenomena in RC(Reinforced Concrete) structure, causes corrosion of reinforcement, and this leads degradation of serviceability and structural problems. The application of silicate based impregnant to concrete surface are known for excellent constructability and cost-benefit for the maintenance of RC structure. In the work, the compressive strength and resistance of chloride diffusion for concrete were evaluated after improving property of concrete surface through two types of silicate based impregnant. Furthermore, based on the previous research and the result from the work, service life analysis was performed. After impregnating of silicate, strength and resistance of chloride diffusion were remarkably improved, and the service life increase to 159% for silicate A impregnation and 304% for silicate B impregnation, respectively.
Purpose: CMMI is a process model used to assess or improve an organization's software development capabilities. This paper deals with the quality indicators when using CMMI and their priorities for possible improvement. Methods: The 22 process areas and 167 practices of CMMI are matched with 60 indicators of Quality Scorecard(QSC) first to analyze the balance of CMMI in terms of prevention, appraisal, and final result categories and second to isolate a set of key areas for quality focused performance measures. Results: A total of 86.2% (144 out of 167) CMMI practices were mapped to QSC. According to the CMMI level of maturity, level 2 and 3 accounted for more than 75% of the total. The practices at the maturity level of 4 and 5 were mapped to more than 52% of the final result's measurements. It has been observed that CMMI practices need further elaboration at higher levels to consider prevention, appraisal, and final results simultaneously. Conclusion: In order to improve the quality performance of the organization by applying CMMI, the final result measures should be refined in metrics, cycles, and methods, and then corrective actions could be conducted to improve the performance of CMMI practices. This strategy would help the practitioners benefit from CMMI in fostering the overall quality level of key activities for the organization's business goals.
Cha, Gi-Wook;Kim, Jin Ho;Moon, Hyeun Jun;Kim, Young-Chan;Hong, Won-Hwa
Journal of the Architectural Institute of Korea Structure & Construction
/
v.36
no.4
/
pp.153-161
/
2020
This study investigates the recycling potential of demolition waste (DW) according to building structure, while considering economic aspects. For that, this study surveyed 1,034 residential buildings to collect reliable information on demolition waste generation rates (DWGRs). This study suggested a method for operational cost calculation for each stage and carried out an inventory analysis. The economic value of recycled DW materials was also calculated. And then, the recycling potential(RP) was calculated by building structures and waste types. RP by building structure was low (27-40%), and RP was found in the order of masonry-block, wooden, RC and concrete-brick. By type of DWs, the RP of aggregates was considerably lower than 7%, and DWs such as wood, plastics, and metals showed more than 100% RP. Considering the results of this study, In order to improve the RP of buildings and DWs, the diversification of products that recycled waste like aggregates (i.e., mortar, concrete, bricks, blocks, tiles) and the development of high value-added products are considered to be the most urgent problems. Based on the above RP results, this study proposed a more advanced method for life cycle assessment of buildings and demolition waste.
Gong, Keum Rok;Kang, Han-Seung;Ahn, Jin-Ho;Park, Young Jun
Journal of the Architectural Institute of Korea Structure & Construction
/
v.34
no.2
/
pp.57-66
/
2018
When developing projects to build facilities to be shared by both military bases and surrounding communities, strategies are needed to achieve two objectives: 1) minimize missteps and opposition from local communities in the process of developing and implementing such projects, and 2) promote cost-benefit optimization and user-satisfaction. With aim of promoting co-operation and co-existence between military bases and adjust communities, this research proposes esthetical factors to be considered in conceiving civil-military sharing facilities. It seeks experts' opinions on the development of civil-military sharing facilities, and examines critical factors (economic feasibility, security, and satisfaction, etc.) for project development as well as building types suitable for shared-use between military bases and local residents. It then establishes a method to prioritize facility-type and narrow down design factors (considerations and restrictions) in project development by applying quantitative analysis. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. At the first round of the survey, facility types, items for consideration and restrictions are drawn, and then at the second round of the survey, criticality of each item is analyzed. Finally, it reaches a conclusion on suitability of facility types for civil-military sharing facilities, and selects project considerations and restrictions when developing this kind of project.
Journal of the Korea Institute of Building Construction
/
v.20
no.6
/
pp.537-543
/
2020
The window cleaning works are manpower-dependent and are performed in an unstable posture at high altitude, so that there is a risk of falling. Therefore, there is an urgent need to improve the safety of workers. In this study, a conceptual design was proposed for the cleaning of exterior windows of a building, and the economic feasibility of the proposed conceptual model was analyzed. The proposed model is designed to avoid protrusions such as window frames, and to be able to respond even if the shapes of the upper and lower parts are different. As a result of analyzing the economic feasibility of the designed conceptual model, the benefit cost ratio was 4.48, which was significantly higher than 1. Therefore, the economic feasibility of the proposed window cleaning device is expected to be sufficient. The results analyzed in this paper will be used in the development and marketing of the window cleaning device.
The purpose of this study is to develop a business model that efficiently converts diesel power generation systems to renewable energy microgrids (MG) in large-scale islands. Most of the previous studies on the conversion of renewable energy MG in islands had limitations dealing with efficiency from the perspective of suppliers. However, the microgrid has the characteristic of getting benefits through the interaction between the consumer and the supplier. In addition, the efficient MG business model from the perspective of new institutional economics is a structure in which consumers and suppliers jointly participate. Therefore, this study assumed that the MG business model in which the supplier's MG and the consumer's community solar participated would benefit all participants, and verified the assumptions using domestic island data. In terms of supplier investment, the cost of power supply (LCOE) of assumed model was calculated to be 14.0% lower than that of the diesel model and 3.7% lower than that of the supplier-only MG model. From the perspective of consumer investment, electricity bills are expected to be reduced by more than 200,000 won per household per year through self-generation of solar power. Social benefits are expected to reduce external environmental costs. The CO2 emissions of the assumed model were calculated to be 39.5% lower than the diesel model and 1.5% lower than the supplier-only MG model. Therefore, the MG business model with consumer participation proposed in this study is expected to be an efficient alternative to renewable energy MG conversion in domestic islands, and is meaningful as an energy plan that improves the benefits of local residents.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.