• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.254-257
• /
• 2002

As the large Coolant amount used of a machine holds mass serious trouble recently, an environment pollution is increased, and a machine is conquering large specific gravity in an empty cost plane. It is the stage that must reexamine the parts washing that processing is later with this current way or a problem of a liquid waste treatment back. The environmental problems by using coolant demanded the new cooling methods. As one of them, the studies on the grinding with compressed cold air and oil mist have been done. The cooling method using compressed cold air was effective through going down the temperature of compressed air supplied below -$25^{\circ}C$ and increasing the amount of compressed cold air, but had not enough cooling effect due to the low performance of lubrication. Therefore, the cooling methods using oil mist newly were suggested. This method can satisfy both cooling effect and lubrication with only small amount of coolant, also have the benefit in the point of decreasing the environmental pollution. This paper focused on analyzing the grinding characteristics of the cooling method using oil mist. The grinding test according to compressed cold air and oil mist supply direction were done.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.709-715
• /
• 2016

This paper presents a comparison of an experimental study on spot and plug welding of an automotive body panel. Spot welding is a common joining technology used in automotive body panel assembly. In automotive body repair, however, plug welding is widely used due to its technical simplicity and cost benefit. Some researchers have focused on the use of spot welding in the manufacturing process, but there has been very little research done with respect to the engineering analysis of the plug welding process. In this study, two kinds of specimens are considered to compare the difference of failure strength between spot weld and plug weld: normal tension and shear tension. The experimental results show, in both normal tension and shear tension, that spot welding has higher failure strength than plug welding. In addition, plug welding is more vulnerable to shear tension than normal tension. This study can be applied to further studies on practical optimization for maintenance and repair of automotive body panels.

• Journal of Dairy Science and Biotechnology
• /
• v.18 no.1
• /
• pp.47-60
• /
• 2000

Over decades of work, the probiotic research has grown rapidly with a number of new cultures, which is claimed a variety of benefit. However, many of the specific effects attributed to the ingestion of probiotics remain convoluted and scientifically unsubstantiated. Accordingly, the scientific community faces a greater challenge and must objectively seek cause and effect relationships for many potential and currently investigated probiotic species. Rational selection and design of probiotics remains an important challenge and will require a solid information about the physiology and genetics of candidate strains relevant to their intestinal roles, functional activities, and interaction of with other resident micro flora. As far as beneficial culture of lactic acid bacteria (LAB) is concerned, simple, cost-effective, and exact identification of candidate strains is of foremost importance among others. Until recently, the relatedness of bacterial isolates has been determined sorely by testing for one or several phenotyphic markers, using methods such as serotyping, phage-typing, biotyping, and so forth. However, there are problems in the use of many of these phenotype-based methods. In contrast, some of newer molecular typing methods involving the analysis of DNA offer many advantages over traditional techniques. These DNA-based methods have the greater discriminatory power than that of phenotypic procedures. This review focuses on the importance and the basis of molecular typing methods along with some considerations on de-sign and selection of probiotic culture for human consumption.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.125-128
• /
• 2003

This study aims to feasibility study of the Youth Center. Welfare of adolescents is appeared to a matter of concern and interest as social problems of various kinds related adolescents including the fire at a beer bar in Inchon occur recently. In view of government, in addition to fairness of facility location, location of such facilities are to be determined the respect to cost of locating facilities and developmental direction in the future. A feasibility study is an effective tool in determining the decision of investment or not and the level of investment priority on projects requiring a sizeable investment and the feasibility of a project. The first, it is to select reasonable location. It was selected three and two by consideration of facilities distribution and connection with others. Five proposal selected was estimated by five element of approach, demand, symbol, reality, environment. In result proposal I was chosen. The next, it is to estimate scales. It was estimated by analysis of catchment area, similar facilities, programs, in result 7,260$m^2$ cone into analysis to the best gross area The finally, it is to study on economical efficiency. Income Statement estimated was came out \1.7billion. in addition, it offer various benefit by public facilities.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.489-494
• /
• 2001

Actual construction data of completed projects can be utilized for the economic, time benefit of improving the efficiency on planning, designing, estimating and managing tasks in succeeding projects. But the lack of the system which accumulates and manages the actual data with standardized type, it has not performed well and stayed on early stage. It is required not only specific plan for the utilization of actual data but a construction information management system which collects and processes far-reaching data with standardized from based on facility. Therefore, the purpose of this study is to develop a construction information management system for Apartment housing ,which stored data along project feature database, actual cost database and actual database based on the Web. This effort can make an offer the clearness of dull construction market and the base of construction intelligence

• The Journal of the Korean dental association
• /
• v.53 no.12
• /
• pp.910-916
• /
• 2015

Various mucosal lesions are originated in oral cavity and trauma is most common cause of these lesions. Definitive treatment of these lesions is stop of traumatic events and removal. There are two representative removal methods in medical fields; conventional mess or LASER. Compare to conventional mess technique, LASER has several advantages such as bleeding control, pain reduction. Of the various LASER systems, $CO_2$ LASER is regarded as best choice for general practitioners due to its convenience, universal use and high cost/benefit effects. In these article, we report the treatment cases of mucocele, fibroma, and leukoplakias using $CO_2$ LASER. Eventhough there are malignancy potential of oral mucosal lesion especially leukoplakias, careful history taking, clinical examination, and regular check-up will help the general practitioners to manage these lesions. Simple and relatively safe oral mucosal lesions have to be treated more in general dental practitioners.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.327-329
• /
• 2001

This paper presents the application of Parallel genetic algorithm and parallel tabu search to search an optimal solution of a unit commitment problem. The proposed method previously searches the solution globally using the parallel genetic algorithm, and then searches the solution locally using tabu search which has the good local search characteristic to reduce the computation time. This method combines the benefit of both method, and thus improves the performance. To show the usefulness of the proposed method, we simulated for 10 units system. Numerical results show the improvements of cost and computation time compared to previous obtained results.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.536-538
• /
• 2001

국내에서는 전력산업의 규제가 점차 완화되면서 전력시장은 새로운 틀이 형성되어지고 있다. 전력시장의 구조개편후 각 전력회사들은 그들의 판매수익을 높이기 위하여 행동하게 될 것이다. 즉 그들의 부하를 적절하게 조절함으로써 한계비용이 평균비용보다 낮게 유지되도록 하여 이윤극대화를 추구해 나갈 것이다. 따라서 전력회사들은 수요측의 관리가 과거 어느 때 보다 필요하게 될 것이며, 어떻게 하면 부하곡선의 피크치를 억제할 것인지 생각하게 된다. 이러한 것을 해결하기 위해 전력회사들은 그들의 소비자 대부분을 수요관리 프로그램에 참여시키 부하관리를 할 것이며 이를 통해 피크치 부하를 억제시켜 한계비용을 줄이려할 것이다. 소비자들을 수요관리 프로그램에 참여토록 유도하기 위하여 전력회사는 여러 가지 인센티브를 제공하게 되는데, 소비자들은 이러한 인센티브를 받아 프로그램에 참여할 것인지를 선택하게 된다. 본 논문에서는 전력회사가 수요관리 프로그램을 실행할 때 어떤 효과를 얻게 되고 참여자들이 느끼는 순이익은 어떻게 될지를 고려하게 될 것이다. 이러한 것들은 전력회사 입장에서는 수요관리 프로그램을 실행하는 것이 그들에게 이익을 가져다 줄 것인지를 말해주며 소비자들은 그들의 프로그램에 지속적으로 참여할 것인지를 선택하게 될 것이다.

• Korean Journal of Bronchoesophagology
• /
• v.6 no.2
• /
• pp.177-180
• /
• 2000

Backgrounds： Patients with respiratory failure may require prolonged mechanical ventilation. The purpose of this study was to determine the optimal time for tracheostomy and complications of tracheostomy. Methods : All medical records of 27 patients who underwent tracheostomy in department of thoracic & cardiovascular surgery at Yondong Severance hospital between January 1, 1990 and December 31, 1998, were reviewed. Variables analyzed include underlying disease, primary indication of tracheostomy, interval from 1st intubation to tracheostomy, duration from tracheostomy to weaning ventilator, duration of decannulation, and complication. There were 18 men and 9 women. Mean age at the time of the tracheostomy was 54 years (rage, 11 to 64 yeras). Results : Underlying diseases included lung cancer in 14 patients (51.9%), trauma in 8 patients (29.6%), and TE fistula in 2 patients. The indication for tracheostomy were as follows: prolonged mechanical ventilation in 13 patients, purpose of bronchial toilet in 9 patients, and tracheal stenosis in 5 patients. The mean interval between the first intubation and tracheostomy was 8.1 days. The mean duration from tracheostomy to weaning ventilator was 10.1 days. Conclusions : Timing of tracheostomy Is very important. Tracheostomy may benefit patients because it can accelerate the process of weaning and thus lead to a reduction in the duration of ventilation, length of hospitalization, and cost.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.429-435
• /
• 2010

Although recently revised building code requires 15~20% increased thermal insulation performance for window systems, since the code is focusing on winter heat loss, it is not satisfactory to contribute on reducing rapidly rising cooling load in summer. Window systems have great impact on building heat gain and loss. Therefore technological development for window system specialized in shading solar gain in summer is an urgent matter. This study evaluates the performance of sun shading and thermal insulation for blind integrated window system. Also, computer simulation evaluates the effect of heating and cooling energy consumption reduction for an individual unit(floor area of $85m^2$) of a multi-family housing. Physibel Voltra, a heat transfer analysis software, was used to analyse the effect of energy consumption reduction, and the energy load was converted to the cost to compare the actual effect of economical benefit.