• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.907-913
• /
• 2000

세라믹 강 유전체를 이용한 corrugate 구조의 으 전극으로 마들어지 유전체 칩에 의한 전자파 감쇄기를 설계하고 제작하였다. 이 감쇄기의 감쇠는 corrugate 구조에 의한 전파모드 차단조건으로부터 얻을 수 있도록 설계하였다. 근거리 프로브 측정 및 SAR 측정에 의한 결과는 셀룰라 밴드인 824∼849MHz에서 3.6∼5dB, PCS 밴드인 1750∼1780 MHz에서 4∼5dB의 감쇠를 얻었다. 또한 감쇠 범위는 휴대폰 정면을 중심으로 ±35°이외는 감쇠가 없으므로 통화기 통화품질의 저하가 거의 없음이 나타났다.

• 복합신소재구조학회지
• /
• 제5권4호
• /
• pp.29-42
• /
• 2014

• 설비공학논문집
• /
• 제17권3호
• /
• pp.201-208
• /
• 2005

This study presents the experimental study on improvement of frost/defrost performance in an heat pump system with newly developed fin and multiple compressors. As multiple compressors system, the variable and single speed compressor combinations has been introduced and compared with single speed 1-compressor system in a view point of improvement of frost/defrost performance. Also, newly developed corrugate shaped fin has been compared with conventional louver shaped fin. The frost/defrost performance is defined and some parameters are compared to discuss the effect of each combination. From this experimental study, it is known that if the variable and single speed compressor combination system equipped with corrugate shaped fin, the system performance has greatly improved not only for heating capacity, but also for frost performance.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.839-848
• /
• 2005

Plastic plate heat exchangers have many advantages over the conventional heat exchangers such as aluminum plate heat exchangers, rotary wheel heat exchangers and heat pipe heat exchangers which have been used for ventilation heat recovery in the air-conditioning systems. In the present study, pressure drop and heat transfer characteristics of plastic plate heat exchangers are investigated for various design parameters and operating conditions which affect the performance of the plastic plate heat exchangers. In flat plate type heat exchanger, material thickness and channel height of heat exchanger are considered, and corrugate size and heat transfer area are considered in case of corrugate type heat exchanger. Pressure drop and effectiveness of the corrugate type heat exchanger increase as the corrugate size decreases.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.379-385
• /
• 2011

One of main catalysts for De-NOx in SCR is a $V_2O_5/TiO_2$, and this work formulated powdery catalysts focusing ultimately on corrugate catalytic support. The prepared catalyst consisted of anatase $TiO_2$. Amount of the added vanadium oxide determined the viscosity of catalyst slurry, which is important for washcoat for a final corrugate type catalytic reactor. The test showed a proportional relation between adsorption amount of ammonia and specific surface area. De-NOx efficiency could be obtained up to 96.3 % at $400^{\circ}C$ with a spacial velocity of $4,000hr^{-1}$.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.95-102
• /
• 2007

A feeding system is a key component in manufacturing packing boxes such as printing, slotting and gluing. The role of the feeding system is to feed corrugate cardboards which is usually tick and large. So, a special method is necessary to feed corrugate cardboards. This paper suggests a concept and an automatic feeding machine to feed corrugated cardboards using TRIZ, the theory of inventive problem solving. The automatic feeding machine consists of units to regulate the machine according to length and width of corrugated cardboards, a feeding part with a plurality of small rollers, and a sucking part which intensify frictional force between rollers and the lowest feeding cardboard. In particular, the feeding part is composed of an up-and-down motion plate with holes to suck the lowest corrugated cardboard as well as small rolling rollers after stopping in a moment. Thus this machine does not sensitive to size of corrugated cardboards and also can keep feeding accuracy during feeding fast.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1366-1371
• /
• 2008

Four simulation models of plastic plate heat exchangers are designed and simulated. The flat plate type heat exchanger is designed as the reference model in order to evaluate how much thermal performance increases. The turbulence promoter type heat exchanger is fabricated with cylindrical-type vortex generators and rib-type turbulence promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type heat exchanger has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. The flows are assumed as a three-dimensional, incompressible and turbulent model. The standard k-$\varepsilon$ model is used as the turbulent flow modeling, the SIMPLE algorithm is used to treat the coupling between pressure and velocity, and first order upwind scheme is used for discretization of momentum, turbulent and energy. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.52-60
• /
• 2009

The purpose of this research is to develop high efficiency plastic plate heat exchangers which can be substituted for conventional aluminum plate heat exchangers. Four simulation models of plastic plate heat exchangers are designed and simulated: that is, flat plate type, turbulent promoter type, corrugate type and dimple type heat exchanger. The flat plate type is designed as the reference model in order to evaluate how much thermal performance increases. The turbulent promoter type is fabricated with cylindrical-type vortex generators and rib-type turbulent promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. Numerical simulation is carried out using the FLUENT code. The flows are assumed as a three-dimensional, incompressible and turbulent model. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type. The tendency of numerical simulation results is in good agreement with that of the experimental results.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.216-221
• /
• 2007

An experiment was carried out to investigate the effect of a coolant circuit arrangement on the heat transfer and air pressure drop of a fin-tube sensible heat exchanger with the corrugated fin surface. The air inlet temperature was set to $23^{\circ}C$,the relative humidity to 50% and the air inlet flow rate to 20, 22, $25m^3/min$, respectively. while the coolant temperature was set to $7^{\circ}C$, and the coolant mass flow rate to 10, 16, 22kg/min, respectively. Experiment showed that the exchanger having a diameter of 12.7mm with parallel circuit does better performance in sensible heat transfer and air pressure drop than those three of diameter of 12.7mm with a series circuit and that with diameter of 15.88mm with a parallel circuit.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.747-754
• /
• 2017

본 논문은 강관과 콘크리트가 함께 축력에 저항하는 합리적인 콘크리트 강관구조형식에 대해 무피복상태에서 내화성능을 높이는 연구이다. 콘크리트 강관구조는 내부 콘크리트로 인한 열저항 성능이 매우 우수하지만, 국내에서는 일정시간 동안 내화성능을 확보하도록 규정하고 있는 내화구조시스템으로 피복처리가 되지 않는 상태에서는 활발하게 적용되지 못하고 있다. 따라서 콘크리트충전 강관구조 기둥의 구조성능을 향상시키기 위하여 강관 내측면에 부착하는 리브요소를 개발하고 그것의 효과적인 형상을 개발하는 연구로서 콘크리트 강관기둥 내측면에 Corrugated Rib를 부착하여 구조적압축 및 좌굴 저항능력을 향상시키는 CFT 시스템을 개발하고자 한다. 이에 대한 연구 결과, 강관 내면 부착 리브의 적용으로 내화시 CFT 기둥의 내력상승에 의한 좌굴방지를 확인하였고, 내화성능기준 또한 만족하였다. 따라서 본 연구를 통해 개발된 강재리브(Corrugate rib)구조 보강재를 활용한 CFT의 공법은 내화피복 없이 구조 및 내화성능을 만족시키는 것으로 판단된다. 향후 rib의 다양한 형태를 변수로 하는 연구와 공장생산에서 공정을 효율화 시키고, 경제성 있는 시스템으로 활용할 수 있도록 추가 연구가 필요할 것으로 판단된다.