• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.116-125
• /
• 2018

Modified 9Cr-1Mo ferritic steel is a preferred material for steam generators in nuclear power plants for their creep strength and good corrosion resistance. Austenitic stainless steels, such as type 316LN, are used in the high temperature segments such as reactor pressure vessels and primary piping systems. So, the dissimilar joints between these materials are inevitable. In this investigation, dissimilar joints were fabricated by the Shielded Metal Arc Welding (SMAW) process with Inconel 82/182 filler metals. The notch tensile properties and Charpy V-notch impact toughness properties of various regions of dissimilar metal weld joints (DMWJs) were evaluated as per the standards. The microhardness distribution across the DMWJs was recorded. Microstructural features of different regions were characterized by optical and scanning electron microscopy. Inhomogeneous notch tensile properties were observed across the DMWJs. Impact toughness values of various regions of the DMWJs were slightly higher than the prescribed value. Formation of a carbon-enriched hard zone at the interface between the ferritic steel and the buttering material enhanced the notch tensile properties of the heat-affected-zone (HAZ) of P91. The complex microstructure developed at the interfaces of the DMWJs was the reason for inhomogeneous mechanical properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.102-102
• /
• 1999

6Mo급 슈퍼 스테인리스강의 내식성은 여러 환경에서 여러 가지의 부식 시험 방법을 통해서 확띤되어 왔다. 이 합금이 보이는 탁월한 내식성 때문에 해수 설비 계통,정유 설비,원자력 발전소의 열교환기 등의 중요 재료로서 그 사용 용도가 급격히 증가하고 있다. 그런데 방사선의 영향을 받게 되는 설비에 금속 재료가 사용되는 경우,특히 경수로의 노내 구조물, 액체 금속로의 열교환기, 핵융합로의 제1벽 재료 등 에서는 합금 원소가 방사성 환경에 의하여 제거되는 현상이 나타난다. 따라서 본 연구에서는 이러한 상황을 미리 재료 제조 차원에서 모사하여 탄소량과 질소량의 함량 을 달리 한 6Mo급 슈퍼 스테인리스강을 제조하여 미세 조직, 기계적 성질 및 부식 특성의 변화에 대하여 연구하였다. 진공 고주파 유도 용해로를 이용하여 탄소량과 질소량이 각기 변화된 슈퍼 스테인리스강을 용해 한 뒤 아르곤 가스 분위기에서 $1180^{\circ}C$로 soaking하고 열간 압연을 행하였다. 열간 압연으로 표변에 생성된 산화 스케일을 불산과 질산의 혼합 용액으로 제거한 뒤 냉간 압연을 행하였다. 이 냉연 판재에 대하여 $1150^{\circ}C$로 소둔하여 각 실험에 사용하였다. 광학 현미경을 이용하여 미세 조직의 변화를 관찰하였으며, 상온과 고온($520^{\circ}C$)에서 인장 시험을 행하였으며, 경도 측정을 행하였다. 또한 양극 분극 시험과 비등 질산 침지 시험 및 비등 40% NaOH 용액에서의 일정 연신율 시험을 행하 였다. 탄소 함량이 증가할수록 항복 강도 및 인장 강도는 증가하고 있으며 연신율은 감 소하는 일반적인 경향을 보였으며 비등 질산 시험에서는 탄소량에 관계없이 매우 우수한 내식성을 쁘였다. 또한 비등 상태의 40% NaOH 용액에서의 응력 부식 균열 시험 결과, 탄소량이 증가할수록 부식 저항성이 증가하고 있는 것으로 평가되었다. 한 편 질소량이 증까할수록 결정립이 미세화되었으며 경도값이 상승하였다. 이들 합금 에 대한 양극 분극 시험 결과, 질소량의 변화가 탄소량의 변화보다 내식성에 큰 영향 을 미치고 있음을 알 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.359-363
• /
• 2013

Silicon carbide and its composites are being considered as a nuclear fuel cladding material for LWR nuclear reactors because they have a low neutron absorption cross section, low hydrogen production under accident conditions, and high strength at high temperatures. The SiC composite cladding tube considered in this study consists of three layers, monolith CVD SiC - $SiC_f$/SiC composite -monolith CVD SiC. The volume fraction of SiC fiber and surface roughness of the composite layer affect mechanical and corrosion properties of the cladding tube. In this study, various types of SiC fiber preforms with tubular shapes were fabricated by a filament winding method using two types of Tyranno SA3 grade SiC fibers with 800 filaments/yarn and 1600 filaments/yarn. After chemical vapor infiltration of the SiC matrix, the surface roughness and fiber volume fraction were measured. As filament counts were changed from 800 to 1600, the surface roughness increased but the fiber volume fraction decreased. The $SiC_f$/SiC composite with a bamboo-like winding pattern has a smaller surface roughness and a higher fiber volume fraction than that with a zigzag winding pattern.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.3-14
• /
• 2019

Copper is one of the first metals utilized by humankind about 11,500 years ago. But copper is not plentiful metallic element in the earth's crust. Copper has a high thermal and electric conductivity and is relatively corrosion resistant. In principle copper is virtually 100 % recyclable as an element without loss of quality. The recycling of copper scrap reduces the energy consumption and environmental burden, comparing to the primary metal production. Currently, approximately 30% of the global copper supply provides by recycling. Copper scrap is smelted in primary and secondary smelter. Type of furnace and process steps depend on the quality and grade of scrap. Depending on copper content of the secondary raw material, refining is required, which is usually done through electrorefining. This work provides an overview of the primary copper production and recycling process.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.2
• /
• pp.61-68
• /
• 2023

Ti and Ti alloys are used in the automobile and aerospace industries due to their high specific strength and excellent corrosion resistance. However their application is limited due to poor formability at room temperature and high unit cost. In order to overcome these issues, dissimilarly jointed materials, such as cladding materials, are widely investigated to utilize them in each industrial field because of an enhanced plasticity and relatively low cost. Among various dissimilar bonding processes, the rolled cladding process is widely used in Ti alloys, but has a disadvantage of low bonding strength. Although this problem can be solved through post-heat treatment, the mechanical properties at the bonded interface are deteriorated due to residual stress generated during post-heat treatment. Therefore, in this study, the microstructure change and residual stress trends at the interfaces of Ti/Al cladding materials were studied with increasing post-heat treatment temperature. As a result, compared to the as-rolled specimens, no difference in microstructure was observed in the specimens after postheat treatment at 300, 400, and 500℃. However, a new intermetallic compound layer was formed between Ti and Al when post-heat treatment was performed at a temperature of 600℃ or higher. Then, it was also confirmed that compressive residual stress with a large deviation was formed in Ti due to the difference in thermal expansion coefficient and modulus of elasticity between Ti Grade II and Al 1050.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.37-45
• /
• 2024

Molybdenum is used in various industries because of its high heat and corrosion resistance. It was selected as a critical mineral in Korea. However, there have been recent challenges in production because of the increased depth and decreased grade of molybdenum veins. Consequently, it is necessary to enhance the effectiveness of the molybdenum beneficiation process. In this study, a basic evaluation of beneficiation characteristics was conducted to enhance the effectiveness of the domestic molybdenum ore beneficiation process. The properties of the beneficiation process were assessed using mineralogical analysis, work index, and flotation kinetics. The results revealed that the allowable particle size of the molybdenum ore for liberation was ~100 ㎛. In addition, the work index was calculated to be 14.57 kWh/t. The operating conditions in the flotation units were achieved by determining the optimal flotation time for each process based on flotation kinetics. Finally, the characteristics of molybdenum ore beneficiation provided in this study can be utilized to diagnose the grinding and flotation processes of large-scale molybdenum beneficiation plants.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.390-397
• /
• 2022

Parylene-C which was mainly used for industries such as electronics, machinery and semiconductors has recently been in the spotlight in the medical field due to its properties such as corrosion resistance and biocompatibility. In this study we intend to derive a plan to improve the bonding strength of Parylene-C coating with the SUS304 base material for medical use which can be applied to various medical fields such as needles, micro needles and in vitro diagnostic device sensors. Through plasma pretreatment the bonding strength between Parylene-C and metal materials was improved. It was confirmed that the coated surface was hydrophobic by measuring the contact angle and the improvement of the surface roughness of the sample manufactured through CNC machining was confirmed by measuring the surface roughness with SEM. Through the above results, it is thought that it will be effective in increasing usability and reducing pain in patients by minimizing friction when inserting medical devices and in contact with skin. In addition it can be applied to various application fields such as human implantable stents and catheters, and is expected to improve the performance and lifespan of medical parts.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.