• 전산구조공학
• /
• 제8권1호
• /
• pp.127-136
• /
• 1995

본 연구는 가중적분법을 이용한 추계론적 유한요소해석에 관한 것으로 구조계 내에 존재하는 재료상수와 기하학적 상수의 임의성을 해석에 고려하여 추계론적 해석을 수행하였으며 대상 구조로는 평판구조를 택하였다. 재료와 기하학적 해석인자의 임의성을 포함한 요소강성행렬의 유도를 위해서 임의장을 가장하였으며 임의장의 평균은 0이고 표준편차 값은 0.1을 사용하였다. 이러한 임의장의 특성은 auto-correlation 함수에 의해서 표현되었으며 이 함수는 반응변화도를 얻는 과정에 사용되었다. 본 연구에서는 평판의 두께에 대한 임의성을 고려하기 위해서 새로운 auto-correlation 함수가 유도되었다. 유도된 새로운 auto-correlation 함수는 재료탄성계수의 임의장 특성을 나타내는 기존의 함수와 임의장 분산 계수의 함수로 나타났다. 수치해석결과는 몬테카를로 시뮬레이션 결과와 비교되었으며 상호 잘 일치하는 좋은 결과를 나타내었고 이들 결과는 제시된 이론적인 수렴치와도 잘 일치하였다. 평판두께에 대한 해석의 경우 역시 Lawrence의 결과는 물론 몬테카를로 시뮬레이션과 제시된 이론치와도 잘 일치하였다.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.

• Journal of applied mathematics & informatics
• /
• 제30권1_2호
• /
• pp.201-210
• /
• 2012

A modified multiplicative update algorithms is presented for computing the nearest correlation matrix. The convergence property is analyzed in details and a sufficient condition is given to guarantee that the proposed approach will not breakdown. A number of numerical experiments show that the modified multiplicative updating algorithm is efficient, and comparable with the existing algorithms.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4388-4397
• /
• 2015

이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.

• 한국의류학회지
• /
• 제31권9_10
• /
• pp.1453-1464
• /
• 2007

The purpose of this study is to examine the hand of spring/fall fabrics for 'Saenghwal Hanbok' on subjective hand, objective hand and the preference. In this study, 28 varieties of spring/fall fabrics such as cotton fabrics, synthetic fabrics, blended fabrics and a silk fabric for 'Saenghwal Hanbok' are used. To evaluate the subjective hand of fabrics, the holistic touch and preferences, 33 seven ranks' segmentic differential scale questions are developed with adjective pairs and are gathered by surveying experts on clothes. The mechanical properties, HV and THV of them are measured and calculated by KES-FB system. Through subjective hand, items could be classified into six hand expressions: 'bulky/extensibility', 'stiffness', 'feeling of weight', 'surface property', 'drapability' and 'moisture property'. Through mechanical properties, the results indicated that the character of cotton fabrics are slight flexible, tough, rough, uneven, a bit heavy, thick and low resilience on tensile and compression, and then those of synthetic fabrics, blended fabrics and a silk fabric are thin and light, smooth, flat and bulkless. In correlation on subjective evaluations and the preference for 'Saenghwal Hanbok', cotton fabrics mainly depend on 'surface property' and 'moisture property' and then synthetic fabrics, blended fabrics and a silk depend on 'bulky/extensibility' and 'surface property' In correlation on objective hand and the preference for 'Saenghwal Hanbok'. people aren't satisfied with low resilience. high stiffness and low drape.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.247-255
• /
• 2020

Sand filter is a key unit process for particle removal in water purification treatments. Its long-standing use is due to on-site customized retrofit. Proper selection of filter media is one of the retrofit approaches to improve filter performance. This study described a series of controlled laboratory column tests and examined the effects of media property on filtration and backwash. When sand media of 0.51 mm in effective size was replaced by sand of 0.60 mm, the filter run increased up to 5 times in the given bed depth. The change of media property required an increase of backwash rate by 0.05 m/min to satisfy the requirement of bed expansion, more than 20%. When the anthracite was changed with lower effective size and uniformity coefficient, correlation with sand in the filter bed could be satisfied within the permissible error between media and bulk characteristics. Besides, this selection resulted in a well-stratified configuration of media layers after bed expansion. The column study showed that the correlation of property between the dual media had a significant effect on the filter productivity and backwash interval.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.239-240
• /
• 2008

A new frequency offset estimator using low cross-property of PN sequences is proposed in the orthogonal frequency division multiple access (OFDMA) uplink systems. Simulation results show that the proposed estimator improves the mean square error (MSE) performance compared to conventional estimator [2] where each user have both different timing offset and different frequency offset. In addition, the MSE performance is improved as the length of PN sequence increases.

• 대한가정학회지
• /
• 제33권4호
• /
• pp.149-155
• /
• 1995

In this study, the formative property of flare skirts is carry out by the shape horizontal sections of hem line. Flare skirts was made by 10 kinds of fabrics with different physical properties. the length of flare skirts was 60cm. The main results obtained are as follows ; 1, The shape horizontal sections of hem line has differed with number of nodes and fabrics properties, in direction of texture. 2. According to the fabrics analysis of drapability decreased in order from Polyester/nylon(20/80)>Polyester(twill, thickness 0.2441)>Polyester(plain, thickness0.3760)>Polyester(plain, thickness 0.3687)>Polyester(plain, thickness 0.3101). 3. The correlation between the number of nodes and wave-height of modes and breadth showed a high negative correlation with the drapability of fabrics.

• Journal of information and communication convergence engineering
• /
• 제2권1호
• /
• pp.5-8
• /
• 2004

DS-COMA is now a matured multiple access technology that utilizes spreading codes for user separation. In this paper, we attempt to improve the performance of a multiuser DS-COMA system with a unique chip shaping code called Carrier Interferometry (CI) code. The CI codes exhibit an excellent correlation property that can be used in many applications. In DS-COMA with CI codes (CI/DS-COMA), the symbols are spread by a spreading code and then the chip signals are shaped using a CI code. Due to the correlation property of the CI code, a diversity gain from the shaped chip signals is achieved and the performance of DS-COMA is significantly improved. Comparison study demonstrates that the DS-COMA with CI outperforms the conventional DS-COMA system in multiuser environments.

• 한국통신학회논문지
• /
• 제28권10C호
• /
• pp.930-935
• /
• 2003

본 논문에서는 소수 p에 대해 Kumar와 Moreno가 소개한 유한체 상에시 정의된 bent 함수를 이용하여 균형성과 최적의 상관성질을 갖는 p진 bent 수열군의 일반화된 생성방법을 소개한다[3]. 이렇게 생성된 수열군을 일반화된 p진 수열이라 부르기로 한다. Moriuchi와 Imamura가 [6]에서 소개한 균형성과 최적의 상관특성을 갖는 p진 수열군은 일반화된 bent 수열의 특별한 예임을 보인다.