• 제목/요약/키워드: correlation methods

검색결과 12,142건 처리시간 0.043초

비트스트림의 구조 분석을 이용한 음성 부호화 방식 추정 기법 (Blind Classification of Speech Compression Methods using Structural Analysis of Bitstreams)

  • 유훈;박철순;박영미;김종호
    • 한국정보통신학회논문지
    • /
    • 제16권1호
    • /
    • pp.59-64
    • /
    • 2012
  • 본 논문에서는 임의의 음성 압축 비트스트림의 구조를 분석하여 음성 신호의 부호화 방식을 추정 및 분류하는 기법을 제안한다. 저 비트율 전송 및 저장을 위하여 다양한 보코더 방식의 음성 압축 기법이 개발되었는데, 이들은 블록 구조를 반드시 포함하고 있다. 각 부호화 방식을 구분하는데 있어, 본 논문에서는 Measure of Inter-Block Correlation (MIBC)를 이용하여 블록 구조의 유무 및 신호 블록의 길이를 파악하고, 블록 길이가 동일한 부호화 방식의 경우 각 부호화 방식마다 압축 스트림 내의 각 비트 위치별로 상관도 분포가 다르다는 점을 이용하여 해당 부호화 방식을 정확하게 추정하는 기법을 제안한다. 실험 결과 제안한 비트스트림 분석 기법은 다양한 음성 신호의 종류, 음성 신호의 길이 및 잡음 환경에 강인한 검출 능력을 나타냄을 보인다.

실내.외 공기 중 부유먼지 측정방법 상호간의 비교평가 - 중량법을 대상으로 (Comparative Evaluation of Gravimetric Measurement Methods for Suspended Particles in Indoor and Outdoor Air)

  • 백성옥;박지혜;서영교
    • 한국대기환경학회지
    • /
    • 제18권4호
    • /
    • pp.285-295
    • /
    • 2002
  • In this study, several types of gravimetric methods (such as high, medium, low, and ultra low volume sampling methods) were applied to determine suspended particulate matter concentrations in both ambient and indoor environments. Comparative evaluations were undertaken with SPM data obtained using a variety of samplers (TSP, PM10, and PM4.0) at different sampling flow rates. Correlation coefficients between TSP and PM10 concentrations measured at different flow rates fell in the range of 0.73∼0.94 (n=40). In addition, correlation coefficients for PM concentrations measured by different TSP samplers were in the range of 0.90∼0.95 (n=36 or n=38), while 0.77∼0.91 (n=38) for PM10 samplers. Correlation analysis was also conducted on indoor monitoring data that were measured using ultra-low-volume samplers at both different or identical flow rates. The correlation coefficients were in the range of 0.98∼0.99 (n=38) between TSP and TSP and 0.92∼0.94 (n=38) between TSP and PM10. The mean ratio for high volume PM10 to TSP concentration that was monitored at identical flow rates in the ambient air appeared to be 0.72. The mean ratios of PM10 to TSP and PM4.0 to TSP observed with identical flow rates at indoor environments were 0.47 and 0.40. The results of this study may provide empirical information concerning the compatability of aerosol data obtained by gravimetric sampling methods at different flow rates.

Comparison of Three Normalization Methods for 3D Joint Moment in the Asymmetric Rotational Human Movements in Golf Swing Analysis

  • Lee, Dongjune;Oh, Seung Eel;Lee, In-Kwang;Sim, Taeyong;Joo, Su-bin;Park, Hyun-Joon;Mun, Joung Hwan
    • Journal of Biosystems Engineering
    • /
    • 제40권3호
    • /
    • pp.289-295
    • /
    • 2015
  • Purpose: From the perspective of biomechanics, joint moments quantitatively show a subject's ability to perform actions. In this study, the effect of normalization in the fast and asymmetric motions of a golf swing was investigated by applying three different normalization methods to the raw joint moment. Methods: The study included 13 subjects with no previous history of musculoskeletal diseases. Golf swing analyses were performed with six infrared cameras and two force plates. The majority of the raw peak joint moments showed a significant correlation at p < 0.05. Additionally, the resulting effects after applying body weight (BW), body weight multiplied by height (BWH), and body weight multiplied by leg length (BWL) normalization methods were analyzed through correlation and regression analysis. Results: The BW, BWH, and BWL normalization methods normalized 8, 10, and 11 peak joint moments out of 18, respectively. The best method for normalizing the golf swing was found to be the BWL method, which showed significant statistical differences. Several raw peak joint moments showed no significant correlation with measured anthropometrics, which was considered to be related to the muscle coordination that occurs in the swing of skilled professional golfers. Conclusions: The results of this study show that the BWL normalization method can effectively remove differences due to physical characteristics in the golf swing analysis.

정적 기립 자세에서 족저압 분포와 척추 정렬과의 상관관계 연구 (The Correlation of Foot Pressure with Spinal Alignment in Static Standing)

  • 임재헌;고효은
    • PNF and Movement
    • /
    • 제12권1호
    • /
    • pp.13-17
    • /
    • 2014
  • Purpose: To determine the normative data for the correlation of spinal, pelvic parameters with foot pressure in the young subjects. Methods: The subjects of this study were 39 patients in healthy adults. The Formetric-III was used to measure of spinal alignment. The pedoscan was used to measure of foot pressure. The correlation of trunk imbalance, trunk inclination, lateral deviation with foot pressure. The foot pressure measurement was consisted of maximal/mean pressure, weight contribution. Result: There was a negative correlation of trunk inclination with Max_R. There was a negative correlation of trunk inclination with Max_R. There was a positive correlation of trunk imbalance with Max_L. There was a positive correlation of lumbar lordosis with Mean_R_front, Lt. posterior weight distribution. There was a negative correlation of lumbar lordosis with Lt., Rt. in distribution There was a negative correlation of pelvic tilt with Mean_R_front, Lt. posterior weight distribution. There was a positive correlation of pelvic tilting with Rt. weight distribution, Lt. posterior weight distribution. There was a negative correlation of pelvic torsion with Lt. weight distribution, Rt. posterior weight distribution. There was a negative correlation of pelvic rotation with Lt. weight distribution, Lt. posterior weight distribution. Conclusion: The data obtained from the study may be used for future studies related to correlation of the spinal, pelvic deviation with foot pressure.

청소년의 스트레스 인지수준과 적응방법에 관한 연구 (A Study on the Perceived Level of Stress of Adolescence and the Methods of Coping to Stress)

  • 고정자
    • 가정과삶의질연구
    • /
    • 제14권4호
    • /
    • pp.219-232
    • /
    • 1996
  • This study was investigated the perceived level of stress and the coping method which the adolescent were confronting. The subject of this investigation was high school students who resided in the City of Pusan. Life Event Scale and Coping Methods Scale were used as the methods for examination. The data were analyzed using M, SD, t-test one-way ANOVA scheffe-test and Pearson's correlation related with this study problem were tested. The results of this study are as follows: 1. The perceived level of teenager's stress was little low with M=1.65 When dividing sphere of perceived level the stress by school problem was the highest and the circumstance problem personal one family one and a companion one are followed in regular sequence. 2. It was found that degree of stress made a difference according to the sex course grade school year religion parents's presence or absence SES the satisfactory degree of school life the satisfactory degree of school life the satisfactory degree of home life and the rearing attitude of parents. 3. As the coping score of teenager's stress was M=2.54. The short-term coping method was higher compared with the long-term one regarding coping methods. 4. It was found that the coping method of stress differed from each other according to variables of sex school year the satisfactory degree of school life and the satisfactory degree of home life. 5. It was found that the perceived level of stress had negative correlation with the coping method and especially long-term coping method had higher negative correlation.

  • PDF

골연령의 측정에서 Greulich-Pyle법, Tanner-Whitehouse법, 완관절 초음파 통과속도를 이용한 골연령 측정법의 비교 연구 (Measure of Bone Age through Greulich-Pyle Method, Tanner-Whitehouse Method and Ultrasound Transonic Velocity of Inferior Radiocarpal Joint)

  • 이동형;이진용;김덕곤
    • 대한한방소아과학회지
    • /
    • 제22권2호
    • /
    • pp.69-80
    • /
    • 2008
  • Objectives : The purpose of this study was to evaluate the correlation of 3 methods of bone age measurements. Methods : 102 children(49 boys, 53 girls) were involved in this study. We measured the height, weight and bone age based when they visited for the first time. We measured bone age using BoneAge of Sunlight Co.,Ltd. Two of the bone age measurement methods, Greulich-Pyle and Tanner-Whitehouse, were used to analyze the left dorsopalmar hand-wrist radiographs of 102 children who visited in Department of Pediatrics, O O University Oriental Hospital. This study was designed to investigate the correlation of the bone age between two methods. Results : The bone ages were related with age, height, weight and BMI according to this study(P<0.01). Each bone age assessment method had statistically significant correlation to each other(P<0.01). Conclusions : The ultrasound transonic velocity of inferior radiocarpal joint will become a sufficient diagnostic tool of bone age assessment if measurement error can be minimized by proper effort.

  • PDF

Micro-seismic monitoring in mines based on cross wavelet transform

  • Huang, Linqi;Hao, Hong;Li, Xibing;Li, Jun
    • Earthquakes and Structures
    • /
    • 제11권6호
    • /
    • pp.1143-1164
    • /
    • 2016
  • Time Delay of Arrival (TDOA) estimation methods based on correlation function analysis play an important role in the micro-seismic event monitoring. It makes full use of the similarity in the recorded signals that are from the same source. However, those methods are subjected to the noise effect, particularly when the global similarity of the signals is low. This paper proposes a new approach for micro-seismic monitoring based on cross wavelet transform. The cross wavelet transform is utilized to analyse the measured signals under micro-seismic events, and the cross wavelet power spectrum is used to measure the similarity of two signals in a multi-scale dimension and subsequently identify TDOA. The offset time instant associated with the maximum cross wavelet transform spectrum power is identified as TDOA, and then the location of micro-seismic event can be identified. Individual and statistical identification tests are performed with measurement data from an in-field mine. Experimental studies demonstrate that the proposed approach significantly improves the robustness and accuracy of micro-seismic source locating in mines compared to several existing methods, such as the cross-correlation, multi-correlation, STA/LTA and Kurtosis methods.

개선된 SSTDR을 이용한 케이블 고장 검출과 위치 계산 (Detection and Location of Cable Fault Using Improved SSTDR)

  • 전정채;김재진;최명일
    • 전기학회논문지
    • /
    • 제65권9호
    • /
    • pp.1583-1589
    • /
    • 2016
  • This paper proposes an improved spread spectrum time domain reflectometry (ISSTDR) using time-frequency correlation and reference signal elimination method in order to have more accurate fault determination and location detection than conventional (SSTDR) despite increased signal attenuation due to the long distance to cable fault location. The proposed method has a two-step process: the first step is to detect a peak location of the reference signal using time-frequency correlation analysis, and the second step is to detect a peak location of the correlation coefficient of the reflected signal by removing the reference signal. The proposed method was validated through comparison with existing SSTDR methods in open-and short-circuit fault detection experiments of low voltage power cables. The experimental results showed that the proposed method can detect correlation coefficients at fault locations accurately despite reflected signal attenuation so that cable faults can be detected more accurately and clearly in comparison to existing methods.

퇴행성 슬관절염 평가도구와 적외선 체열촬영과의 상관관계 연구 (The Study About the Correlation between Assessment Instruments of Knee OA and DITI)

  • 김희권;이상훈;서정철;이승덕;최선미;김용석
    • Journal of Acupuncture Research
    • /
    • 제23권1호
    • /
    • pp.155-164
    • /
    • 2006
  • Objectives : The aim of this study is to validate the correlation between Assessment Instruments of Knee OA and digital infrared thermographic imaging(DITI) and to find out the methods to assess knee OA by DITI. Methods : 60 subjects were evaluated. They were asked to answer VAS pain scale, WOMAC, KHAQ and LFI. Correlation was assessed by examining the spearman's rank correlation coefficients. Results : VAS, WOMAC and LFI was correlated with not only the thermal difference between Ant. knee and Post. knee, but also the lowest temperature of Ant. knee. Conclusion: DITI value was useful for evaluating the degree of OA. And we should find out that decrease of pain is correlated with change of DITI value.

  • PDF

다중기기 취약도곡선의 지진상관계수 조합 절차 (Combination Procedure for Seismic Correlation Coefficient in Fragility Curves of Multiple Components)

  • 김정한;김시영;최인길
    • 한국지진공학회논문집
    • /
    • 제24권3호
    • /
    • pp.141-148
    • /
    • 2020
  • For the important safety system, two or more units of identical equipment or redundant components with similar function were installed to prevent abnormal failure. If the failure probability of such equipment is independent, this redundancy could increase the system safety remarkably. However, if the failure of each component is highly correlated by installing in a structure or experiencing an earthquake event, the expected redundancy effect will decrease. Therefore, the seismic correlation of the equipment should be evaluated quantitatively for the seismic probabilistic safety assessment. The correlation effect can be explained in the procedure of constructing fragility curves. In this study, several methodologies to quantify the seismic correlation in the failure probability calculation for multiple components were reviewed and two possible ways considering the realistic situation were selected. Simple examples were tested to check the applicability of these methods. The conversion method between these two methods was suggested to render the evaluation using the advantages of each method possible.