• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.116-121
• /
• 2020

In this study, a single-phase analysis of droplet slug with different contact angles was performed based on the visualization of experimental results. Droplet slug - flowing between gases in a hydrophobic mini channel - moves with a triple contact line without a gas liquid film on the wall. The results show that the rotational flow inside the droplet occurred; this was compared and verified with the results of two-phase analysis. The pressure field shows pressure rise at the front and rear ends. The effective length - the section that satisfies the laminar flow condition - became shorter as the droplet velocity increased. The Choi's correlation for the effective length agrees with this analysis results with a slight difference. This difference is judged as the difference in the contact angle of the slug model.

• Journal of Korean Biological Nursing Science
• /
• v.26 no.2
• /
• pp.136-143
• /
• 2024

Purpose: The purpose of this study was to investigate the associations of obesity and clinical characteristics including interleukin-6 (IL-6) with hospital length of stay (LOS) in coronavirus disease-2019 (COVID-19) patients in Korea. Methods: A retrospective descriptive study design was employed to analyze medical data from a government-designated hospital in a city of Korea. Clinical data were collected from 256 patients with COVID-19 in negative-pressure isolation wards in 2021. The following parameters were analyzed: body mass index (BMI), IL-6 levels, age, sex, comorbidities, healthy habitsat the time ofadmission, and LOS. The statistical package SPSS 26.0 was used for descriptive statistics, the independent t-test, the chi-square test, and partial correlation coefficients. Results: The age of COVID-19 patients was positively correlated with BMI (r = -.16, p = .012), IL-6 levels (r = .14, p = .022) and LOS (r = .26, p < .001). Obesity, non-drinking, hypertension, and older age were associated with longer LOS. Conclusion: These results suggest that age, obesity, and hypertension in COVID-19 patients are related to LOS. Studies investigating other factors that can affect long-term hospitalization in COVID-19 patients are suggested.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.821-828
• /
• 2004

The increasing apparent photosynthetic rate per leaf area may improve seed yield in soybean. Leaf area, length and width are related to the photosynthetic capability of the plant. In this study, two populations derived from the cross of Keunolkong, Shinpaldalkong and Iksanl0 were evaluated with simple sequence repeat (SSR) markers to identify length, width and length/width ratio of leaf. Leaf length/width ratio were significantly negative correlation with leaf width in K/S and K/I populations. In the K/S population, two minor QTLs for leaf length (LL) were found on LG Dlb+W and 1. Two QTLs on LG J and L were related to LL in K/I population. Two and three minor QTLs were identified in leaf width with total phenotypic variation of 13% and 18.04 in K/S and K/I populations, respectively. The leaf length/width ratio, two QTLs on LG I and L, and three QTLs on LG Cl, E and L were related to K/S and K/I populations, respectively. Thus it is assumed that the leaf traits are very much dependent on the genotype used and different breeding approach should be considered for the selection of favorite leaf traits in soybean breeding programs.

• Atmosphere
• /
• v.26 no.1
• /
• pp.111-126
• /
• 2016

In the numerical weather model, surface properties can be defined by various parameters such as terrain height, landuse, surface albedo, soil moisture, surface emissivity, roughness length and so on. And these parameters need to be improved in the Seoul metropolitan area that established high-rise and complex buildings by urbanization at a recent time. The surface roughness length map is developed from digital elevation model (DEM) and it is implemented to the high-resolution numerical weather (WISE-WRF) model. Simulated results from WISE-WRF model are analyzed the relationship between meteorological variables to changes in the surface roughness length. Friction speed and wind speed are improved with various surface roughness in urban, these variables affected to temperature and relative humidity and hence the surface roughness length will affect to the precipitation and Planetary Boundary Layer (PBL) height. When surface variables by the WISE-WRF model are validated with Automatic Weather System (AWS) observations, NEW experiment is able to simulate more accurate than ORG experiment in temperature and wind speed. Especially, wind speed is overestimated over $2.5m\;s^{-1}$ on some AWS stations in Seoul and surrounding area but it improved with positive correlation and Root Mean Square Error (RMSE) below $2.5m\;s^{-1}$ in whole area. There are close relationship between surface roughness length and wind speed, and the change of surface variables lead to the change of location and duration of precipitation. As a result, the accuracy of WISE-WRF model is improved with the new surface roughness length retrieved from DEM, and its surface roughness length is important role in the high-resolution WISE-WRF model. By the way, the result in this study need various validation from retrieved the surface roughness length to numerical weather model simulations with observation data.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.9-14
• /
• 1984

This study was performed to obtain the effective selection informations for improvement of quality and increase of yield in red pepper. The eight parents and twenty eight crosses from partial diallel were used as materials for estimation of correlations among the pericarp characters, viz, fruit length, fruit width, pericarp thickness (fresh and dry) and pericarp weight (fresh and dry), between pericarp weight and seed weight and between pericarp weight and the percent of seed weight/pericarp weight and path coefficients on fresh and dry pericarp weight. Results were as follows. In $F_1s$, fresh and dry pericarp weight had positive correlations with fruit length, fruit width, and pericarp thickness. Fresh pericarp weight was also positively correlated with dry pericarp weight. Dry pericarp thickness had a negative correlation with fruit length but had positive correlations with fruit width and fresh pericarp thickness. Fresh pericarp thickness had a positive correlation with fruit width. Significantly positive correlations between $F_1s$ and mid-parents were observed in pericarp characters. Pericarp weight had a positive correlation with seed weight but had a negative correlation with the percent of seed weight/pericarp weight. In path coefficient analysis, it was found that fruit length, fruit width and pericarp thickness had direct effects on fresh and dry pericarp weight and that fruit length had the largest direct effect in $F_1s$.

• Korean Journal of Plant Resources
• /
• v.37 no.4
• /
• pp.411-422
• /
• 2024

Naked oat is particularly vulnerable to cold weather among cereal crops, and frequent lodging due to their long culm length. Also it is difficult to cultivate in double cropping system with rice because of late maturity in Korea. In this study, we charaterized 71 naked oat germplasms including two control varieties with agronomic traits, to select superior resources and use them for the improvement of exsiting varieties. The maturity date was May 26th for 'Joyang' and June 1st for 'Daeyang', and there were 5 resources including IT302003, which was earlier than Daeyang. In the case of culm length, the distribution ranged from 62 to 124 cm, and there were 13 resources, including IT209241, that were shorter than 'Joyang' (84 cm) and 'Daeyang' (83 cm). In correlation analysis of agronomic traits, the highest positive correlation (r=0.89) was observed between days to heading and days to maturity. In addition, culm length and spike length (r=0.72) and days to heading (r=0.50) showed a positive correlation. However, Barley yellow dwarf virus(BYDV) and grain yield (r=-0.30), lodging tolerance and liter weight (r=-0.37) showed a negative correlation. Cluster analysis, resources with similar traits such as liter weight, husk ratio, days to heading, and days to maturing were subclassified. Through this analysis, 6 resources, including IT302002 (X345-1-B4-20-1), which had short culm length, early maturity, and cold tolerance compared to 'Joyang' and 'Daeyang', were selected. Among the selected excellent resources, the avenanthramide content of the four resources was IT302002 (325.18 ㎍/g), K000010 (557.3㎍/g), K253299 (447.33 ㎍/g), and K253301 (440.49 ㎍/g), respectively, which was higher than 'Daeyang' (301.97 ㎍/g). These excellent resources will be used as breeding materials for the development of new varieties in the future.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.2
• /
• pp.99-114
• /
• 2020

The characteristics of the Brazilian tensile strengths(σ_t) parallel to the rock cleavages in Jurassic granite from Geochang were analysed. The evaluation for the six directions of rock cleavages was performed using the parameter values on microcrack length and the above strength. The strength values of the five test specimens belonging to each direction were classified into five groups. The strength values of these five groups increase in order of group A < B < C < D < E. The close dependence between the above microcrack and strength was derived. The analysis results of this study are summarized as follows. First, the chart showing the variation and characteristics of strength among the three rock cleavages were made. In the above chart, the strength values of six directions belonging to each group were arranged in order of rift(R1 and R2), grain(G1 and G2) and hardway(H1 and H2). The strength distribution lines of the five groups concentrate in the direction of R1. And the widths among the above five lines indicating strength difference(Δσ_t) are the most narrowest in R1 direction. From the related chart, the variation characteristics among the two directions forming each rock cleavage were derived. G2(2)-test specimen shows higher value and lower value of the difference in strength compared to the case of G1(1)-test specimen. These kinds of phenomena are the same as the case between the test specimen H2(2) and H1(1). The strength characteristics of the above test specimens (2) suggest lower microcrack density value and higher degree of uniformity in the distribution of microcracks arrayed parallel to the loading direction compared to those of test specimens (1). The six strength values belonging to each group were arranged in increasing order in the above chart. The strength values of the test specimens belonging to both group D and E appear in order of R1 < R2 < G1 < H1 < G2 < H2. Therefore, the strength values of group D and E can be indicator values for evaluating the six directions of rock cleavages. Second, the correlation chart between slope angle(θ) and strength difference(Δσ_t) were made. The values of the above two parameters were obtained from the five strength distribution lines connecting between the two directions. From the chart related to rift plane(G1-H1, R'), grain plane(R1-H2, G') and hardway plane(R2-G2, H'), the slope values of linear functions increase in order of R'(0.391) < G'(0.470) < H'(0.485). Among three planes, the charts related to hardway plane show the highest distribution density among the five groups. From the related chart for rift(R1-R2, R), grain(G1-G2, G) and hardway(H1-H2, H), the slope values of linear functions increase in order of rift(0.407) < hardway(0.453) < grain(0.460). Among three rock cleavages, the charts related to rift show the highest frequency of groups belonging to the lower region. Taken together, the width of distribution of the slope angle among the three planes and three rock cleavages increase in order of H' < G < R' < R < G' < H. Third, the correlation analysis among the parameters related to microcrack length and the tensile strengths was performed. These parameters may include frequency(N), total length(Lt), mean length(Lm), median length(Lmed) and density(ρ). The correlation charts among individual parameters on the above microcrack(X) and corresponding five levels of tensile strengths for the five groups(Y) were made. From the five kinds of correlation charts, the values of correlation coefficients(R²) increase along with the five levels of strengths. The mean values of the five correlation coefficients from each chart increase in order of 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm). Fourth, the correlation chart among the corresponding maximum strength for group E(X) and the above five parameters(Y) were made. From the related chart, the values of correlation coefficient increase in order of 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed). The two parameters that have the highest correlations are median length with maximum strength. Through the above correlation analysis between microcrack and strength, the credibility for the results from this study can be enhanced.

• Korean Journal of Plant Resources
• /
• v.33 no.4
• /
• pp.255-262
• /
• 2020

The aim of this study was to investigate the correlation between growth characteristics and ginsenoside contents of 7 and 13-year-old wild-simulated ginseng. The results of growth characteristics such as rhizome length, root length, fresh weight, cross-section area, surface area and volume were shows significantly higher in 13-year-old wild-simulated ginseng compare to 7-year-old wild-simulated ginseng. In the case of 11 ginsenoside contents, the contents of G-Rb1, Rb2, Rc, Rd, Re, Rf, Rg1 and Rg2 were shows significantly higher in 13-year-old wild-simulated ginseng compare to 7-year-old wild-simulated ginseng. In addition, in the comparative analysis of ginsenoside contents between wild-simulated ginseng and cultivated ginseng, 13-year-old wild-simulated ginseng was shows significantly higher G-Rb1, Rd, Re, Rf and Rg1 ginsenoside contents compare to 4-year-old and 5-year-old cultivated ginseng. In the result of correlation analysis between growth characteristics and ginsenoside contents, the G-Rb1, Rb2, Rc, Rd, Re, Rf, Rg1, Rg2 ginsenoside was shows significantly positive correlation with rhizome length, fresh weight, cross-section area, surface area, volume, while as the contents of G-Rb1, Re, Rf, Rg2 was shows significantly negative correlation with shoot diameter. The results of this study was might be help to provide useful information on the establish quality standard by the investigate correlation analysis between growth characteristics and ginsenoside content of wild-simulated ginseng.

• Journal of Korean Physical Therapy Science
• /
• v.12 no.4
• /
• pp.69-77
• /
• 2005

The purpose of this study is to estimate how much the motility of affected and unaffected lower limb respectively would have effects on their ambulation through comparing the difference between their affected and unaffected lower limb and studying the correlation between such difference and their ambulation. In addition, the study also intends to find out remedial measures suitable for improving their ambulation with relevant physical treatment. To do this, a quantitative electromyogram(QEMG) test was done to hamstring of affected and unaffected lower limb so as to yield IP values. Based on such IP values, RMS(root mean square) values as the total sum of IP values were found with QEMG analysis system (made by Medelec Co.) and then the ambulation depending on the difference in muscular strength were analyzed by ink-foot print method as well as the corresponding statistics were processed by T-test through SPSS. The differences in muscular strength of hamstring in unaffected limbs of hemiplegic patients only affect stride length. It was statistically significant. The effect of difference in muscular strength of the hamstring in affected limb of hemiplegic patients on their ambulation was very different between strong and weak group in terms of walking velocity, step per minute, stride and step length, showing statistically significant difference(p<.05). Although there was a difference in the step length of the affected limb, it was not statistically significant(p>.05). For the unaffected hamstring, there were significant differences of stride length between in unaffected limb and in affected limb. For the affected hamstring, there were also significant differences in walking velocity, step per minute, stride and step length. Besides, it was found that the difference of the muscular strength between strong and weak group was at the highest.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.18-29
• /
• 2000

Back injury is frequent in industry workers and is a common cause of productivity loss. It has been reported that the insured of industrial accident insurance tend to stay in hospital longer than that of other types of insurance. The purpose of this study was to identify factors affecting the length of hospital stay for the treatment of back injury in the workers under industrial accident insurance. The results of this study help insurers develop reasonable industrial accident insurance policy for back injury claims and prevention strategies of work-related back injury. A total of 2,949 patients whose industrial accident insurance claim has been approved for the treatment of work-related back injury from January to December 1999 were included in this study. Relationship between the length of hospital stay and characteristics of patient, work place, back injury, and hospital were assessed using ANOVA, t-test, simple linear regression and multiple resgression. The major findings of this study are as follows : 1. The average length of hospital stay(LOS) was 91.82 days, respectively. 2. Characteristics of Patient LOS of male patients was longer than that of female patients, there was positive correlation between age and LOS and between average wage and LOS. Working period was negatively correlated with LOS. Distance from resident to hospital was positively correlated with LOS and LOS was significantly different dependign on type of duty. 3. Characteristics of Work Place LOS was significantly different depending on types of industry and geographical region of work place. Size of work place was positively correlated with LOS. 4. Characteristics of Back Injury Occupational back pain required shorter LOS compared with back injury due to electric shock. Number of concomitant illnesses and severity of disability were positively correlated with LOS. 5. Characteristics of Hospital Patients treated in community hospitals required significantly longer LOS. Treatment in hospitals with rehabilitation program required decreased LOS. This was more prominent as number of physicians specialized in rehabilitation. 6. Multiple regression analysis revealed that distance form resident to hospital, geographical region of work place, size of work place, number of concomitant illnesses, severity of disability, and type of hospital were factors affecting LOS.