• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3229-3235
• /
• 2021

The key process used in nuclear industries for the management of radiotoxicity associated with spent fuel in a closed fuel cycle is solvent extraction. An understanding of hydrodynamics and mass transfer is of primary importance for the design of mass transfer equipment used in solvent extraction processes. Understanding the interfacial phenomenon and the associated hydrodynamics of the liquid drops is essential for model-based design of mass transfer devices. In this work, the phenomenon of drop formation at the tip of a nozzle submerged in quiescent immiscible liquid phase is revisited. Previously reported force balance based models and empirical correlations are analyzed. Experiments are carried out to capture the process of drop formation using high-speed imaging technique. The images are digitally processed to measure the average drop diameter. A correlation based on the force balance model is proposed to estimate drop diameter and jet length. The average drop diameter obtained from the proposed model is in good agreement with experimental data with an average error of 6.3%. The developed model is applicable in both the necking as well as jetting regime and is validated for liquid-liquid systems having low, moderate and high interfacial tension.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.59-66
• /
• 2022

Purpose: The aim of this research was to verify the relationship between three-dimensional (3D) ground reaction force (GRF) and severity of leg length discrepancy (LLD) while walking at a normal speed. It used a 3D motion analysis system with force platforms in standing workers with LLD. Methods: Subjects comprising 45 standing workers with LLD were selected. Two force platforms were used to acquire 3D GRF data based on a motion analysis system during gait. Vicon Nexus and Visual3D v6 Professional software were used to analyze kinetic GRF data. The subjects were asked to walk on a walkway with 40 infrared reflective markers attached to their lower extremities to collect 3D GRF data. Results: The results indicated the maximal force in the posterior and lateral direction of the long limb occurring in the early stance phase during gait had significant positive correlation with LLD severity (r = 0.664~0.738, p <0.01). In addition, the maximal force medial direction of the long limb occurring in the late stance phase showed a highly positive correlation with the LLD measurement (r = 0.527, p <0.01). Conclusion: Our results indicate that greater measured LLD severity results in more plantar pressure occurring in the foot area during heel contact to loading response of the stance phase and the stance push-off period during gait.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1061-1068
• /
• 2003

The correlation between the water and N-methylacetamide (NMA) intramolecular vibrational frequencies and the hydrogen-bond length in a variety of NMA-H₂O and NMA-D₂O complexes was investigated by carrying out ab initio calculations. As the hydrogen-bond length decreases, the frequencies of bending and stretching modes of the hydrogen-bonding water increases and decreases, respectively, and the amide I and II (III) mode frequencies of the NMA decreases and increases, respectively. In this paper, correlation maps among the amide (I, II, and III) modes of NMA and three intramolecular water modes are thus established, which in turn can be used as guidelines for interpreting two-dimensional vibrational spectra of aqueous NMA solutions.

• Journal of ILASS-Korea
• /
• v.4 no.1
• /
• pp.55-61
• /
• 1999

The first maximum point in the stability curve of liquid jet, i.e., the critical point is associated with the critical Reynolds number. This critical Reynolds number should be predicted by simple means. In this work, the critical Reynolds number in the stability curve of liquid jet are predicted using the empirical correlations and the experimental data reported in the literatures. The critical Reynolds number was found to be a function of the Ohnesorge number, nozzle lengh-to-diameter ratio, ambient Weber number and nozzle inlet type. An empirical correlation for the critical Reynolds number as a function of the Ohnesorge number and nozzle length-to-diameter ratio is newly proposed here. Although an empirical correlation proposed in this work may not be universal because of excluding the effects of ambient pressure and nozzle inlet type, it has reasonably agrees with the measured critical Reynolds number.

• Journal of the Korean Society of Combustion
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2007

Analytical investigation of acoustic wave scattering from turbulent premixed flames was conducted to evaluate the acoustic energy amplification/damping. Such acoustic energy change is attributed to the acoustic velocity jump due to flame's heat release. Small perturbation method up to second order and stochastic analysis were utilized to formulate net acoustic energy and the energy transfer from coherent to incoherent energy. Randomly wrinkled flame surface is responsible for the energy transfer from coherent to incoherent field. Nondimensional parameters that govern net acoustic energy were determined: rms height and correlation length of flame front, incident wave frequency, incidence angle, and temperature ratio. The dependence of net acoustic energy upon these parameters is illustrated by numerical simulations in case of Gaussian statistics of flame front. Total net energy was amplified and the major factors that affect such energy amplification are incidence angle and temperature ratio. Coherent (incoherent) energy is damped (amplified) with rms height and correlation length of flame front.

• Korea-Australia Rheology Journal
• /
• v.11 no.4
• /
• pp.269-273
• /
• 1999

Immiscible polymer blends containing a liquid crystalline polymer dispersed phase can be described by existing blend theories when the dispersed-phase droplets are large relative to the orientation correlation length ("domain size") of the LCP. There does not appear to be an interfacial contribution to the linear viscoelastic properties of the blend from droplets smaller than the correlation length. Polyester blends, where interfacial interactions occur between the LCP and the matrix, exhibit a reduction in viscosity to below the viscosity of either component at low shear rates, where the droplet morphology is spherical. These anomalies cannot be explained in the context of existing theory.ng theory.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.357-365
• /
• 2001

The aim of this paper is to perform the experiment and the numerical simulation for investigating the heat transfer in a regenerator system with ceramic honeycomb and to suggest a useful correlation for optimization of the regenerator system. For achieving this, the effects of some parameters were investigated, e. g., switching time, cell size and length of honeycomb on the mean temperature efficiency. The measured temperatures by R-type thermocouples were compared with the predictions by means of the commercial package, STAR-CD. A useful correlation for thermal efficiency was newly proposed as a function of the normalized switching time, defined in terms of switching time, cell size and length of honeycomb. The results showed that the thermal efficiency is above 90% and the normalized heat exchange rate is higher than 80% when the normalized switching time is less than 1000.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.28-33
• /
• 2007

Estimated channel information, especially multipath length and multipath channel of the desired user, is necessary for most previously reported linear blind multiuser detectors in code division multiple access (CDMA) systems. This paper presents a new blind intersymbol decorrelating detector in asynchronous CDMA systems, which uses the cross correlation matrix of the consecutive symbols. The proposed detector is attractive for its simplicity because no channel estimation is required except the synchronization of the desired user. Compared with other reported multiuser detectors, simulation results show that the proposed detector provides a good performance when the active users have significant intersymbol interference and the multipath length is short.

• Nuclear Engineering and Technology
• /
• v.30 no.6
• /
• pp.485-495
• /
• 1998

Migration characteristics of tracers in a rock fracture in a case of line-source and line-collection was studied. The fracture plane was discretized into a square mesh to which variable apertures were assigned. The spatially varying apertures of a fracture were generated using a geostatistical method, based on a given aperture probability density distribution and a specified spatial correlation length. The flow potential and pressure at each node were computed. Calculations showed that fluid flow occurs predominantly through a few preferred paths. Hence, the large range of apertures in the fracture gives rise to flow channeling. The solute transport was calculated using a particle tracking method. The migration plumes of tracer between injection line and withdrawal line are displayed in contour plots. The elution curves are shown to be controlled by the aperture density distribution and to be insensitive to statistical realization and spatial correlation length.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.967-974
• /
• 2003

This experiment was carried out to investigate the relationship of morphological characteristics between reticulum and abomasum of Korean native young goats age from 2 days to 150 days. Number of traits investigated in the reticulum in this experiment were 12[body weight, chest girth, body length, right and left reticulum length(R.L.), upper and lower reticulum length(U.L.), reticulum weight(R.W.), reticulum area(R.A.), upper and lower length of one polygon located at central part of reticulum(U.P.C.R.), right and left length of one polygon located at central part of reticulum(R.P.C.R.), thickness of polygon wall located at central part of reticulum(T.P.C.R.), thickness of polygon wall located at middle part of reticulum(T.P.M.R.), and thickness of polygon wall locared at edge part of reticulum(T.P.E.R.)] and items for abomasum were 12[length of between ostium omaso-abomasicum part and pylosica part in the abomasum(L.B.O.P.), broadest outer part of the abomasum(B.O.A.), weight of abomasum(W.O.A.), area of abomasum(A.O.A.), number of plicae abomasi in the abomasum(N.P.A.A.), thickness of abomasum well at cranial part(ostium omasoabomasicum) in the abomasum(T.A.C.A.), thickness of abomasum well at central part in the abomasum(T.A.P.A.), thickness of abomasum wall at light upper area of pylosica part in the abomasum(T.A.L.A.), length measured from the longest plica abomasi in the abomasum(L.L.P.A.), broadest measured from the longest plica abomasi in the abomasum(B.L.P.A.), area measured from the longest plica abomasi in the abomasum(A.L.P.A.), weight of longest plica abomasi in the abomasum(W.L.P.A.)]. The results were summarized as follows: 1. Number of coefficient of correlation obtained among 12 traits of the abomasum and 12 of the reticulum were 144, and coefficient of correlation of 114 were significant(P〈0.05). 2. Trait of abomasum weight have high correlation with 12 traits of reticulum. 3. Correlation coefficients and regression equation between body weight. VS. abomasum weight(r$_1$), and upper and lower length of one polygon located at central part of reticulum(U.P.C.R.) VS. abomasum weight(r$_2$) were r$_1$=0.8954$^{**}$ and Y=10.703+3.374X, r$_2$=0.8430$^{**}$ and Y=5.689+4.311X, respectively. 4. Correlation coefficients and regression equation between chest girth VS. abomasum weight(r$_1$), and body weight VS. abomasum weight(r$_2$) were r$_1$=0.8708$^{**}$ and Y=-17.219+1.227X, r$_2$=0.8589$^{**}$ and Y=- 17.616+1.290X, respectively.