• 대한치과의사협회지
• /
• 제10권2호
• /
• pp.109-113
• /
• 1972

The measuring tests on the maximum opening distance and the maximum capacity opening distance were conducted on the one hundred normal dental college students and staffs o Seoul National University in order to study the relationships between the maximum opening distance and maximum capacity opening distance. The results were as follows: 1. The maximum opening distance and maximum capacity opening distance were not coincided. 2. The distance of the maximum opening was higher than that of the maximum capacity opening. 3. Physiologic reflex was caused by the water injected into the mouth. 4. The correlation between the maximum opening distance, and maximum capacity opening distance was hardly recognized. 5. Each correlation of the weight height and cheek thickness to maximum opening distance and maximum capacity opening distance was not recognized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2430-2432
• /
• 1998

Generally, in the best-known Pulse-type type and Frequency Modulated Continuous Wave(FM/CW)-type RF range measurement systems, the nearest measurable distance between antenna of system and targets is limited to several tens of meters. Moreover, in case of high-speed targets it is more difficult to measure the distance precisely. In this paper we design our own RF(X-band) range(up to 15 meters) measurement system usi code correlation for high- speed targets. It 0 the correlation value between transmitting receiving PN (Pseudo -Noise) codes. So we determine the distance between antenna of s and targets using this correlation value. We fabricated it using MIC techniques and experimental results show that the proposed syste fully qualified for a short range measurement syste

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.139-148
• /
• 2022

Research into wireless sensor networks (WSNs) is a trendy issue with a wide range of applications. With hundreds to thousands of nodes, most wireless sensor networks interact with each other through radio waves. Limited computational power, storage, battery, and transmission bandwidth are some of the obstacles in designing WSNs. Clustering and routing procedures have been proposed to address these concerns. The wireless sensor network's most complex and vital duty is routing. With the Greedy Perimeter Stateless Routing method (GPSR), an efficient and responsive routing protocol is built. In packet forwarding, the nodes' locations are taken into account while making choices. In order to send a message, the GPSR always takes the shortest route between the source and destination nodes. Weighted directed graphs may be constructed utilising four distinct distance metrics, such as Euclidean, city block, cosine, and correlation distances, in this study. NS-2 has been used for a thorough simulation. Additionally, the GPSR's performance with various distance metrics is evaluated and verified. When compared to alternative distance measures, the proposed GPSR with correlation distance performs better in terms of packet delivery ratio, throughput, routing overhead and average stability time of the cluster head.

• 한국안광학회지
• /
• 제15권1호
• /
• pp.25-30
• /
• 2010

목적: 본 연구는 정점간거리 변화에 따른 교정굴절력과 교정시력의 변화량을 추적하고 분석하여 굴절검사의 기초 자료를 채용하고자 실시되었다. 방법: 시험렌즈를 이용하여 양안균형검사 종료 후 교정굴절력과 교정시력, 정점간거리를 변화했을 때의 교정굴절력 변화량과 교정시력 변화량을 측정하고, 정점간거리와 교정굴절력, 정점간거리와 교정시력과의 상관성과 통계학적 유의성을 분석하였다. 경과 정점간거리에 따른 교정굴절력의 변화량은 -1.00D까지는 정점간거리 변화에 따라 굴절력의 변화가 없으나. -1.25D 이상부터는 정점간거리가 길어질 때 교정굴절력이 증가하는 것으로 나타났으며, 특히 정점간거리가 15 mm 길어졌을 때 굴절력 변화가 크게 나타났고. 11.00D 이상에서는 정점간거리가 5mm, 10mm, 15mm 변화할 때 모두 교정굴절력의 변화가 크게 나타났다. 정점간거리와 교정굴절력과의 상관성 분석 결과 정점간거리가 5 mm 증가시 r=0.999, 10 mm 증가 시 r=0.982, 15 mm 증가 시 r=0.957로 높은 상관성을 나타냈으며, 정점간거리와 교정굴절력은 통계학적으로 유의한 차이가 있었다(p<0.01). 정점간거리 증가에 따른 시력변화는 정점간거리가 길어질수록 시력감소폭이 크게 나타났으며, 정점간거리와 교정시력과의 상관성 분석 결과 정점간거리가 5 mm 증가 시 r=0.969, 10 mm 증가 시 r=0.985, 15 mm 증가 시 r=0.994로 높은 상관성을 나타냈으며, 정점간거리와 교정시력용 통계학적으로 유의한 차이가 있었다(p<0.01). 결론: 정점간거리는 굴절검사와 안경착용 시 중요한 의미를 갖는다. 정점간거리와 교정굴절력, 교정시력 간에는 높은 상관성이 있었으며, 또한 통계학적으로도 유의한 차이가 있었다. 그러므로 시험렌즈를 이용하여 굴절검사를 할 때 정확한 정점간거리가 유지되어야 하며, 안경이 흘러내리지 않도록 최적의 조정(fitting)이 이루어져야 하고, 안경 착용자에게 정기적인 재조정(refitting)의 필요성과 안경 관리방법 등에 관한 교육이 필요하다고 사료된다.

• 농촌지도와개발
• /
• 제18권1호
• /
• pp.73-99
• /
• 2011

As multicultural family gradually increased, our society is changing towards multicultural society. This study tried to identify the factors related with social distance of adolescent of multicultural family. The participants were 568 middle school students living in S city, D and H county in Chungnam province. Data for the study were analyzed by frequency, mean comparison, correlation and regression analysis. The study results were summarized as follows. First, there were significant differences in social distance according to gender, school record, and place of residence. Second, there were significant differences in social distance according to degree of intimacy between general adolescents. Third, as a result of correlation analysis, the lower self-esteem was, the lower value orientation was, the lower cultural diversity was; the higher social distance is. Accordingly, social distance for adolescents had negative correlations with self-esteem, value orientation, and cultural diversity. Fourth, variables affecting social distance were gender, school record, family composition, place of residence, friend from multicultural family, intention to be a friend, experience of overseas travel, self-esteem, value orientation, cultural diversity. Among them, intention to be a friend was a main predictor.

• Journal of Periodontal and Implant Science
• /
• 제31권3호
• /
• pp.625-631
• /
• 2001

The anatomic structure around interproximal area plays an important role not only in the natural teeth, but also in the implant. The loss of papilla can lead to cosmetic deformity, phonetic problem, food impaction on the anterior dentition, and masticatory problem, food impaction and proximal caries on the posterior dentition. The purpose of this study was to evaluate the relationship between interdental papilla existence and distance from contact point to alveolar crest in Korean posteior dentition. 45 Korean adult patients(31males, 14 females) participated in this study. Measurements were carreid out total 126 interproximal areas, 18 first premolar, 31 second premolar, 40 first molar, and 37 second molar areas. Papilla index was recorded as suggested by Jemt. Distance between contact point and alveolar crest measrued by Florida $probe^{R}$, after flap elevation. Each distance was measured 10 times by every 0.1mm unit. The results showed that the mean Papilla index 1.37 and mean distance between contact point and alveolar crest was 7.44mm. The correlation between the Papilla index and distance was high negative correlation(Pearson correlation=-0.47), and it was statistically significant(P=0.000) When the distance between contact point and alveolar crest was 5mm, the loss of papilla was appeared almost in half cases. When the distance was 6mm, the papilla loss was present 95%, when 7mm, the papilla loss was 100%.

• 한국농공학회지
• /
• 제15권2호
• /
• pp.2980-3001
• /
• 1973

Nozzle is a part of sprayer and is consists of several elements; swirl plate, vortexchamber, cap and body. The travelling distance of sprayed particles is important in the wide reach nozzle. The factors to influence the travelling distance of the sprayed particles may be the helical angle of swirl plate, the distance of vortex hamber, the slope and the size of cap hole. The study was conducted to examine the effects of these factors on the travelling distance. The results of this study are summarized as follows; 1) There was higher positive correlation(+0.96) between the maximum travelling distance for which amount of sprayed particles was 5cc/cm min. and centro-position of the travelling distance. 2) There was a higher positive correlation(+0.85) between total discharge of sprayed particles and the centro-position of the travelling distance. 3) Main effects and interaction effects of helical angle, pressure, vortex chamber distance and cap slope were significantly affected the travelling distance of sprayed particles. 4) Main effects of helical angle, pressure and cap slope were especially highly significant to influence the travelling disance. 5) Helical angle, pressure, vortex chamber distance and cap slope influenced spraying forward velocity of dise hole, among which cap slope and pressure of nozzle was the most important factors. 6) Effect of change of helical angle on the travelling distance of sprayed particles, was generally a quadratic, the least value of the distance being showed about $45^{\circ}$ and the largest at about $15^{\circ}\;and\;55^{\circ}$, the decreasing rate of the change between $15^{\circ};and\;25^{\circ}$ was very small. 7) Effect of change of pressure on the travelling distance sprayed particles was generally a linear, the increasing rate of the charge was about 1.68, which was the most effective compared to the change of the other factors. 8) Effect of change of vortex chamber distance on the spraying distance was also generally a linear, the increasing rate being about 0.16, which was the least effective. 9) Effect of change of cap slope on the travelling distance was also generally a linear, the increasing rate was about 0.61 and its effect was about medium.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.165-166
• /
• 2015

본 논문에서는 제주풍력단지에 대한 측정 데이터(measured wind power outputs)를 기반으로 제주 실측 풍력데이터를 이용하여 공간적인 상관관계 분석을 수행하고, 상관관계 감쇠거리(CDD; Correlation Decay Distance)를 적용하여 새로운 풍력발전단지에 대한 공간모델 적용 시 기존 풍력발전단지의 포함여부(set 또는 subset)를 결정하는 기준(Threshold)으로 활용하고자 한다. 이를 통해 풍력발전출력 예측에 공간모델을 적용하고, 정확도를 향상시키는 방안을 연구하고자한다.

• 한국운동역학회지
• /
• 제25권1호
• /
• pp.11-19
• /
• 2015

Objective : The purpose of this study was to analyze the correlation between physical factors (X-factor, X-factor stretch) and club factors (club speed, ball speed, club path, smash factor, vertical launch angle, spin rate, flight time, total length) during impact and it affect on the total distance of the ball during a golf driver swing. Background : There were not enough studies that analyzed the correlation between physical factors(X-factor, X-factor stretch) and club factors(club speed, ball speed, club path, smash factor, launch angle, spin rate, flight time, total length) during a purpose swing to increase total distance. Method : For this study, 9 right handed professional male golfers (KPGA) were chosen. The test subject group used their own drivers and each took a total of 10 swings. These swings consisted of 5 purpose swings to increase total distance and 5 normal swings. Results : The purpose swing to increase total distance showed larger physical factors(X-factor, X-factor stretch) compared to a normal swing however the results were not statistically significant. Total distance increased during a purpose swing as a result of ball and club speed. Conclusion : The results showed that club factors, ball speed and club speed contributed the most in affecting the total distance of the ball during a purpose swing.