• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.561-575
• /
• 1996

The interaction of turbulent mixed convection and surface radiation in a three-dimensional channel with the heated blocks is analyzed numerically. Two blocks are maintained at high temperature and the other bottom and horizontal walls are insulated. S-4 method is employed to calculate the effect of the radiative heat transfer. The low Reynolds number k-$\varepsilon$ model proposed by Launder and Sharma is used to estimate the turbulent influence on the heat transfer enhancement. From above modeling, the effects of various channel specifications on the flow and heat transfer characteristics are investigated. The variables used for the present study are Reynolds number, block spacing, the channel height spacing for block and the emissivity. Average Nusselt numbers along the block surfaces are correlated and presented in terms of Reynolds number, emissivity and dimensionless geometric parameters. For the range of conditions in this study, average Nusselt numbers along the block surfaces are strongly influenced by the Reynolds numbers and channel height spacing for block but weakly influenced by the block spacing and the emissivity of the adiabatic walls.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1423-1430
• /
• 2017

Detonation cell width is an important parameter in hydrogen explosion assessments. The experimental data on gas detonation are statistically analyzed to establish a universal method to numerically predict detonation cell widths. It is commonly understood that detonation cell width, ${\lambda}$, is highly correlated with the characteristic reaction zone width, ${\delta}$. Classical parametric regression methods were widely applied in earlier research to build an explicit semiempirical correlation for the ratio of ${\lambda}/{\delta}$. The obtained correlations formulate the dependency of the ratio ${\lambda}/{\delta}$ on a dimensionless effective chemical activation energy and a dimensionless temperature of the gas mixture. In this paper, support vector regression (SVR), which is based on nonparametric machine learning, is applied to achieve functions with better fitness to experimental data and more accurate predictions. Furthermore, a third parameter, dimensionless pressure, is considered as an additional independent variable. It is found that three-parameter SVR can significantly improve the performance of the fitting function. Meanwhile, SVR also provides better adaptability and the model functions can be easily renewed when experimental database is updated or new regression parameters are considered.

• Korean Journal of Materials Research
• /
• v.19 no.9
• /
• pp.494-498
• /
• 2009

The thermoluminescent phosphors of LiYSi$O_4$ containing rare earth metal(La) dopants of 1 wt.%5 wt.% were prepared, and their TL characteristics have been investigated as a function of parameters such as the doping level and the heating rate. The grain size and cooling temperature of the highly sensitive LiYSi$O_4$: La phosphors have been investigated. The glow curve of LiYSi$O_4$: La has two peaks ($P_1,\;P_2$), and the peak height ratio of the two peaks is called $P_2/P_1$; here, the main peak is $P_2$. Experimental results indicate that the peak height ratios of the glow curve for LiYSi$O_4$: La are clearly correlated with the grain size and cooling temperature. The maximum $P_2/P_1$ ratio 3.25, the maximum sensitivity was observed for a grain size between 100-150 ${\mu}m$. The intensity of the TL peak of the phosphors was linearly proportion to the dose of X-rays.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.817-824
• /
• 2003

Various kinds of zeolites, such as analcime (ANA), cancrinite (CAN), Na-Pl and sodalite octahydrate (SOD) could be synthesized from Hwangto by hydrothermal reaction in a high-pressure vessel. The adsorption characteristics of Cu(II) and Cd(II) by Hwangto and its synthetic zeolites were investigated using the chemical and electrochemical surface parameters of these adsorbents. The heavy metal adsorptivity among the adsorbents decreased in the following sequences: Na-Pl > SOD > ANA > CAN > Hwangto. This sequence was the same with the values of surface site density (Ns) of these adsorbents and was correlated inversely with the values of pHpzc (pH of the point of zero charge) and the va]ues of K$\_$a2/(int) (intrinsic surface deprotonation constant) of the adsorbents for synthetic zeolites, i.e., the adsorbents with higher values of Ns and with lower values of pHpzc and K$\_$a2/(int) for synthetic zeolites showed higher heavy metal adsorptivity. With increasing pH, the heavy metal adsorptivity increased greatly between pHpzc and pH 6 or 7 because of the steep increase of negatively charged sites for synthetic zeolites, but for Hwangto, it increased broadly because of slow increase of negatively charged sites based on its lower surface sites.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.270-278
• /
• 2009

Friction stir welding is a relatively new solid state joining process. A6061-T6 and A5052-H32 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile play a major role in deciding FSP zone formation in A6061-T6 and A5052-H32 aluminium alloy. Three different tool pin profiles have been used to fabricate the dissimilar butt joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.11-18
• /
• 2016

Global Positioning System (GPS) is currently widely used for aviation applications. Single-frequency GPS receivers are highly affected by the ionospheric delay error, and the ionospheric delay should be corrected for accurate positioning. Single-frequency GPS receivers use the Klobuchar model, whose model parameters are transmitted from GPS satellites. In this paper, the long-term accuracy of the Klobuchar model from 2002 to 2014 is analyzed. The IGS global ionosphere map is considered as true ionospheric delay, and hourly, seasonal, and geographical error variations are analyzed. Histogram of the ionospheric delay error is also analyzed. The influence of solar and geomagnetic activity on the Klobuchar model error is analyzed, and the Klobuchar model error is highly correlated with solar activity. The results show that the Klobuchar model estimates 8 total electron content unit (TECU) over the true ionosphere delay in average. The Klobuchar model error is greater than 12 TECU within $20^{\circ}$ latitude, and the error is less than 6 TECU at high latitude.

• Biomedical Science Letters
• /
• v.14 no.4
• /
• pp.233-238
• /
• 2008

Gestational diabetes mellitus (GDM) is a common complication during pregnancy and one of the main causes of adverse fetal-maternal outcomes. However, the pathogenesis of GDM has not been clearly stated. Adiponectin, an adipose tissue-derived plasma protein, is involved in regulation of insulin resistance and glucose hemostasis, and thus is a key modulator of insulin action and glucose metabolism. In this study, we investigated to compare serum adiponectin levels in pregnant women with diabetes, pregnant women who are without diabetes, and non-pregnant women, and to evaluate relationship between serum adiponectin. levels and metabolic parameters. Forty-one pregnant women with diabetes, fifty-nine pregnant women without diabetes and forty non-pregnancy women were recruited. Adiponectin levels were significantly lower in pregnant women with diabetes when compared to non-pregnant women and pregnant women without diabetes. Pregnant women without diabetes at second trimester had lower adiponectin levels compared to non-pregnant women. Adiponectin was negatively correlated with BMI, fasting insulin, HOMA-IR, total cholesterol, and triglyceride. In conclusion, this study confirmed that the decreased level of adiponectin precedes the onset of abnormal glucose level during pregnancy and also normal pregnant women had lower adiponectin levels compared to non-pregnant women. This knowledge may help to identify strategies for lowering the occurrence of GDM in women who are at high risk of developing the disorder.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.235-244
• /
• 2006

Determining 'photosynthetically active radiation' (PAR) is a key part of calculating phytoplankton productivity in a biogeochemical model. We explore the daily and seasonal variability in the ratio of PAR irradiance to total irradiance that occurred at Ieodo Ocean Research Station (IORS) in the East China Sea under clear-sky conditions in 2004 using a simple radiative transfer model (RTM). Meteorological data observed at IORS and aerosol optical properties derived from Aerosol Robotic Network observations at Gosan are used for the RTM. Preliminary results suggest that the use of simple PAR irradiance-ratio values is appropriate in calculating phytoplankton productivity as follows: an average of $0.44\;({\pm}0.01)$ in January to an average of $0.48\;({\pm}0.01)$ in July, with average daily variabilities over these periods of about $0.016\;({\pm}0.008)$ and $0.025\;({\pm}0.008)$, respectively. The model experiments demonstrate that variations in the major controlling input parameters (i.e. solar zenith angle, precipitable water vapor and aerosol optical thickness) cause PAR irradiance ratio variation at daily and seasonal timescales. Further, increases (>0.012) in the PAR irradiance ratio just below the sea-surface are positively correlated with high solar zenith angles and strong wind stresses relative to those just above the sea-surface.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.72-79
• /
• 2006

The objective of this work is to simulate the etching characteristics for the optimization on the etching process of Lead-Frame. The etching characteristics such as etching factor, etching uniformity were investigated under different the actual operating conditions. The correlation between the etching characteristics and the spray ones were analyzed to simulate the etching characteristics in the etching process. To improve the etching characteristics in the etching process, effects of the various operating conditions such as pressure, distance from nozzle tip, pipe pitch, and feed speed should be understood in detail. The spray characteristics obtained by experiment using PDA system were simulated by the Monte-Carlo simulation. The etching process model was coded by Java language. It was found that the spray characteristics were correlated with the etching ones and simulation results generally agreed well with the measured results of etching characteristics in the etching process of Lead-Frame. The optimal operating parameters were successfully found under variable conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.650-655
• /
• 1993

Carbon/epoxy composite(CFRP) coupons previously damaged by low velocity impact were tested under static tensile loading and microscope progress of damage was characterized by ultrasonic C-scan, Scanning Acoustic Microscopy (SAM) and Acoustic Emission(AE) techniques which were based on the application of elastic waves. The degress of impact damage has been correlated with the AE activity during monotonic or loading/unloading tensile testing as well as the result of ultrasonic test. The coupons were subjected to impact velocities ranged from 0.71 to 2.17 m/sec, which introduced the amount of damage rated as 0%, 10%, 30%, and 50% with reference to the total absorbed energy at fracture. Special attention was paid to determine optimal AE parameters to characterize the microscopic fracture process and to predict the residual strength of composite laminates. AE RMS voltage during the early stage of tensile loading was found an effective parameter to quantify the degree of impact damage. It was also found that the Felicity ratio is closely related to the stacking sequence and the residual strength of the CFRP laminates.