• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.151-165
• /
• 2023

In this study, a simple method for the determination of the shear correction factor for composites beam with a rectangular cross section is presented. The plane stress elasticity assumption is used after simplifications of the expression of the stress distribution in the beam. The different fiber orientation angle and volume fraction are considered in this work. The studied structure is subjected to various loading type (thermal and hygrothermal). The numerical results obtained show that there is a dependence of the shear coefficient on the orientation of the fibers. The evolution of the shear correction factors depends not only on the orientation of the fibers and also on the volume fraction and the environment. the advantage of this developed formula of the shear correction factor is to obtain more precise results and to consider several parameters influencing this factor which are neglected if the latter is constant.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.21-26
• /
• 2018

In this paper, a multiple coupling inductor with expandable-integrated magnetic structure was proposed to enable miniaturization of external switched mode power supply (SMPS) for a large display. Inductance formula of the proposed inductor structure was derived through magnetic circuit analysis for a simple inductance designing process. The proposed inductor was applied into a 1kW class interleaved bridgeless power factor correction circuit which requires four inductors, and experimental steady state result of the circuit was compared. According to the experimental result, it was found that the proposed multiple coupling inductor shows the electrical characteristics that can replace the conventional separated inductors and is suitable for miniaturization of the SMPS since the circuit configuration is possible with one shared inductor.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.145-152
• /
• 2020

Purpose: In ionization-chamber dosimetry for high-dose-rate electron beams-above 20 mGy/pulse-the ion-recombination correction methods recommended by the International Atomic Energy Agency (IAEA) and the American Association of Physicists in Medicine (AAPM) are not appropriate, because they overestimate the correction factor. In this study, we suggest a practical ion-recombination correction method, based on Boag's improved model, and apply it to reference dosimetry for electron beams of about 100 mGy/pulse generated from an electron linear accelerator (LINAC). Methods: This study employed a theoretical model of the ion-collection efficiency developed by Boag and physical parameters used by Laitano et al. We recalculated the ion-recombination correction factors using two-voltage analysis and obtained an empirical fitting formula to represent the results. Next, we compared the calculated correction factors with published results for the same calculation conditions. Additionally, we performed dosimetry for electron beams from a 6 MeV electron LINAC using an Advanced Markus^® ionization chamber to determine the reference dose in water at the source-to-surface distance (SSD)=100 cm, using the correction factors obtained in this study. Results: The values of the correction factors obtained in this work are in good agreement with the published data. The measured dose-per-pulse for electron beams at the depth of maximum dose for SSD=100 cm was 115 mGy/pulse, with a standard uncertainty of 2.4%. In contrast, the k_s values determined using the IAEA and AAPM methods are, respectively, 8.9% and 8.2% higher than our results. Conclusions: The new method based on Boag's improved model provides a practical method of determining the ion-recombination correction factors for high dose-per-pulse radiation beams up to about 120 mGy/pulse. This method can be applied to electron beams with even higher dose-per-pulse, subject to independent verification.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.32-41
• /
• 1994

선박해양공학연구센터 예인수조에서 시험되었던 선박 가운데 선형과 프로펠러가 모형과 실선이 동일하였던 36척에 대하여 모형선-실선상관해석을 수행하였다. 뚱뚱한 선형이 대부분임에도 불구하고, 타수조의 결과보다 약간 나은 일치를 보였다. 통계적 처리에 의하여 반류비 수정계수와 거칠기 수정계수에 대한 회귀식을 구하였고, Townsin의 거칠기계수를 적용한 경우의 저항수정계수에 대한 식을 도출하였다.

• 대한공간정보학회지
• /
• 제11권3호
• /
• pp.23-34
• /
• 2003

최근 GPS는 기준점 측량을 비롯한 각종 정밀측량과 항법 등에 그 효율성이 점점 증대되고 있다. 또한 구조물의 변위해석, 해양조위관측, 하천수위관측 및 수심측량 장비와의 조합에 의한 해저, 하상 지형의 모니터링 등에도 널리 이용되고 있다. 본 논문은 DGPS, RTK-GPS와 Echo Sounder 조합 해석에 의해 하구, 하상 모니터링 시 그 효율성을 높이기 위한 연구이다. 이를 위해 기초 실험으로 하구 지질특성을 고려한 수조 실험을 통해 Echo Sounder의 오차 보정량을 산출하고, 하구, 하상 3차원 모니터링을 위한 S/W를 개발하여 현장 실험에 적용, 제반 문제점을 보완하였다. GPS와 Echo Sounder의 조합에 의한 하구, 하상 지형 해석시 측량선의 유동에 의해 수면과 송수파기간의 거리변화에 대한 홀수에 의한 오차는 기하학적인 재배치를 통해 제거할 수 있었고, $z=BM+SAH-DBR_{(i)}-DRT-ED$의 보정식을 산출하였다. 또한 Echo Sounder와의 하구, 하상 지질 특성에 대한 수심측정 오차는 실험 수조를 이용하여 평균 입경-ES잔차 관계를 파악하고 회귀분석을 통해 $Y=0.00474{\ast}ln(X)-0.0045$의 보정식을 산출하여 적용 가능성을 검증하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.6-10
• /
• 2018

Low-noise amplifiers in the radio-frequency (RF) band based on the direct current (DC) superconducting quantum interference device (SQUID) can be used for quantum-limited measurements in precision physics experiments. For the prediction of peak-gain frequency of these amplifiers, we need a reliable design formula for the resonance frequency of the microstrip circuit. We improved the formula for the resonance frequency, determined by parameters of the DC SQUID and the input coil, and compared the design values with experimental values. The proposed formula showed much accurate results than the conventional formula. Minor deviation of the experimental results from the theory can be corrected by using the measured geometrical parameters of the input coil line.

• 조명전기설비학회논문지
• /
• 제16권3호
• /
• pp.84-92
• /
• 2002

저압간선의 굵기는 계통의 전압강하, 간선의 포설조건별 온도 보정계수를 적용한 허용 전류 및 간션의 임피 던스 값에 따라 결정된다. 따라서, 간선의 허용전류 값올 결정하기 위하여 간선의 포셜조건에 따른 적정 보정계 수가 적용되어야 하며, 저압간선의 정확한 임피던스 값을 분석하기 위하여 간선의 종류, 간선의 규격, 포셜조건 에 따른 온도, 표피효과 및 근접 효과 둥이 고려되어야 한다. 본 연구는 저압계통의 전압강하를 고려한 간선의 굵기 산정에 대한 체계적인 설계 흐름도를 제시 하였으며, 일반적인 계산 방식에 비하여 오차가 적은 계수로서 저압간선 굵기 선정 설계 실무에 적용할 수 있는 계산 방식을 연구하였다.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.29-36
• /
• 2019

In modern society in which the fourth industrial revolution has come to the fore and rapid technology innovations are taking place, a phenomenon of making and selling small quantities of various products that consumers want instead of mass producing one item has emerged. As the market is moving toward the multi-item small-sized production system, there is a need for a system in which a machine independently judges and carries out machining and post-processing. In order for a machine to judge processing on its own, it is necessary to measure the force applied to a product. This study aimed to develop a large-scale dynamometer that enables three-axis measurement using octagonal ring load cells. As for the device's configuration, four octagonal ring load cells, which were previously researched, were used to enable three-axis measurement. It was reconfigured by modifying the attachment position of the octagonal ring load cells' strain gauge and the Wheatstone bridge of each axis, and a system was set up to allow the monitoring of data measured through the monitor. The configured device calculated a strain rate by an experiment, and this rate was compared with the theoretical strain rate to find a correction value. The correction value was entered into a formula, deriving a modified formula. The modified formula was entered into the device, which completed the large-scale dynamometer.

• 환경영향평가
• /
• 제15권2호
• /
• pp.93-100
• /
• 2006

In general, the verification to prediction formula in a national road and the main street of a town has been used recklessly in Korea. Therefore we investigated the validity of an existing prediction formula (NIER(87, 99), TR-Noise, KLC(2002)) with correction relationship which was based on both the prediction formular from apartment complex in the field and height 1.5m from the surface level. On the results of measuring the noise level form an isolated distance, the noise level showed that it was 4.5~5.5dB(A) by reason of becoming 2 folder far from a source. From the distribution of noise level measured by the apartment floors, the measurement point (1st floor) was 58.7~71.4dB(A) at its lowest level and the middle floors (3, 5, 7 and 10) were the highest distribution of noise level. From the analysis results on the application validity to an existing prediction formular (NIER(87, 99), TR-Noise, KLC(2002)) in the height 1.5m, the correction coefficients were 0.95~0.96 and the measured values were reasonably close to the predicted values, indicating the validity and adequacy of the predicted models. KLC(2002) model was found accurate within 3dB(A) with 36 data out of the total 42 data, showing the most accuracy among the predict models. However, the developed models have to improve the accuracy with a various of factors.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.217-223
• /
• 2015

In order to predict the motions of a planing hull in waves, it is necessary to accurately estimate the force components acting on the hull such as the hydrodynamic force, buoyancy, and friction, as well as the wave exciting force. In particular, based on strip theory, hydrodynamic forces can be estimated by the summation of the forces acting on each cross-section of the hull. A non-linear strip method for planing hulls was mathematically developed by Zarnick, and his formula has been used to predict the vertical motions of prismatic planing hulls in regular waves. In this study, several improvements were added to Zarnick's formula to predict the vertical motions of warped planing hulls. Based on calm water model test results, the buoyancy force and moment correction coefficients were modified. Further improvements were made in the pile-up correction. Pile-up correction factors were changed according to variations of the deadrise angles using the results found in previous research. Using the same hull form, captive model tests were carried out in other recent research, and the results were compared with the present calculation results. The comparison showed reasonably good agreements between the model tests and present calculations.