• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권3호
• /
• pp.182-188
• /
• 1993

A technical refinement for oral commissure reconstruction is presented. The oral commissure has an important role in oral sphincteric function. Once lost, the oral commissure is very difficult to restore and therefore, reconstruction of the oral commissure requires prevention of this function as well as prevention of microstomia. Trauma and tumor excisions are the most frequent reasons that will necessitate reconstruction of the oral commissure. Direct approximation of the wound margins after resection of the corner of the mouth could easily induce microstomia and difficulty in opening. Thus case presented here deals with distortion of noraml mouth angle and acquired microstomia due to burn and tissue deface following shotgun and explosive wounds. The a mucosal flap approach was used to rehabilitate a natural looking mouth angle showing satisfactory results function and esthetic wise.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.9-13
• /
• 2004

To confirm the previous finding that FDS predicts a fire growth rate too rapid compared with an experiment in a center fire in a room with an opening, the same computational fluid dynamics was applied to two types of fires, wall fire and comer fire. First the grid size was chosen to eliminate possible numerical errors due to a coarse grid system. Then the two types of fires were simulated for three different fire sizes, 7.65, 21.25, and 51.57kW for each type, which are the same as in the experiment to be compared with. The fires were predicted to grow too fist although the average temperatures and heights of the neutral planes were in good agreement with measurement.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.321-326
• /
• 2002

To design mechanical ventilation for bathroom of apartment houses where air supply and exhaust are taken Into consideration, mock-ups of ventilation systems, widely used in bathroom of apartment houses with an area of 100$m^2$, were made and installed in a laboratory, These ventilation mock-ups were available for control of air supply and exhaust, and the size of supply openings were 40cm$\times$1cm, 40cm$\times$3cm, 40cm$\times$5cm. They were installed at five positions, spaced 40cm at a height of 25cm from the floor. and the position of exhaust fans were four corners and center Exhaust fan established each one on corner of the ceiling and one in center. As result that measure ventilation effect by each condition, size of hole that supply air is big, and ventilation effect took effect to be good establishment location is low, Also, distance of exhaust fan is far with hole that supply air, ventilation effect took effect by superior thing.

• 복식
• /
• 제64권3호
• /
• pp.77-92
• /
• 2014

The purpose of this research is to examine the expression methods of Haute Couture designers' high value-added jacket designs, In order to achieve this, the positions and sizes of the design component items of tailored jackets designed by Haute Couture designers from the 1940s to the 1970s were analyzed. The results of the analysis are as follows. First, the silhouette changed while leading the contemporaneous fashions, and such changes could be confirmed by the width and length of the jacket's shoulder, chest, waist, and hem that determine the silhouette. Particularly, the length of the chest changed which signifies that the depth of the armhole was playing an important role in the production of high value-added jackets in relation to the sleeves and the fit of jackets. Second, the position and the size of the dart are the components that can express the fit of a jacket and the designer's creativity, The starting point position of the dart and the position passing by waist, and the position of the end of the dart were placed in the position beyond B.P. depending on the designer's creativity and techniques, deriving the changes of the silhouette and creating high value-added jackets. Third, the tailored collar, which was a three-dimensional component made up of the upper collar, gorge line, lapel, and break line, was an important component that could express high value-added jackets. Changes in the width and the height of the break line position of the sides of the neck were represented as changes in the neck size of the collar, and changes in the vertex locations of the upper collar corner-point, the gorge line (the corner-point of the lapel and V zone) were also represented as diverse tailored collar designs. And the differences in the width and the length of each component of the collar were related to each other and represented as changes in the slope and angle of the collar outline. Fourth, the changes in sleeve designs of the jacket were in such items as the width of the sleeve opening, the width of the sleeve hem, and the length of the sleeve, and were represented as diverse sleeve designs such as widened sleeve opening types, and straight line types.

• 대한두개안면성형외과학회지
• /
• 제21권3호
• /
• pp.161-165
• /
• 2020

Background: Microstomia is defined as a condition with a small sized-mouth that results in functional impairment such as difficulty with food intake, pronunciation, and poor oral hygiene and cosmetic problems. Several treatment methods for microstomia have been proposed. None of them are universally applicable. This study aims at analyzing the cases treated at our institution critically reviewing the pertinent literature. Methods: The medical records of all microstomia patients treated in our hospital from November 2015 to April 2018 were reviewed retrospectively. Of these, all patients who received surgical treatment for microstomia were included in the study and analyzed for etiology, chief complaint, surgical method, and outcomes. The functional outcomes of mouth opening and intercommissure distance before and after the surgery were evaluated. The cosmetic results were assessed according to the patients' satisfaction. Results: Five patients with microstomia were corrected. Two cases were due to scar contracture after chemical burn, two cases derived from repeated excision of skin cancer, and one patient suffered sequela of Stevens-Johnson syndrome. The following surgical methods were applied: one full-thickness skin graft on the buccal mucosa, three buccal mucosal advancement flaps after triangular excision of the mouth corner, and one local buccal mucosal flap. Mouth opening was increased by 6.0 mm, and the intercommissure distance improved by 7.2 mm on average. Follow-up was 9.6 months (range, 5-14 months). Cosmetic assessment was as follows: two patients found the results excellent, three judged it as good. Conclusion: Microstomia has several causes. In order to achieve optimal functional recovery and aesthetic improvement it is important to precisely evaluate the etiologic factors and the severity of the impairment and to carefully choose the appropriate surgical method.

• 소성∙가공
• /
• 제24권4호
• /
• pp.280-286
• /
• 2015

Hemming is used to connect two sheet metal components by folding the edge of an outer panel around an inner panel to create a smooth edge. The minimization of hemming defects is critical to the final quality of automobile products because hemming is one of the last operations during fabrication. Designing the hemmed part is not easy and is influenced by the geometry of the bent part. Therefore, the main problem for automotive parts is dimensional accuracy since formed products often deviate geometrically due to large springback. Few numerical approaches using 3-dimensional finite element model have been applied to hemming due to the small element size which is needed to properly capture the bending behavior of the sheet around small die corner and the comparatively big size of automotive opening parts, such as doors, hoods and deck lids. The current study concentrates on the 3-dimensional numerical simulation of hemming for an automotive door. The relationship between the design parameters of the hemming operation and the height difference defect is shown. Quality improvement of the automotive door can be increased through the study of model parameters.

• Archives of Plastic Surgery
• /
• 제39권3호
• /
• pp.244-248
• /
• 2012

Many types of upper lip reconstruction have been introduced to treat defects after a tumor excision or trauma. The authors treated two cases of upper lip defects. A 35-year-old woman presented with a squamous cell carcinoma of the left upper lip that had invaded the corner of the mouth. After resecting the tumor, the defect was $3.7{\times}3.5cm$ in size. A 52-year-old woman presented with a dog bite of the right upper lip. The defect measured $4.0{\times}2.2cm$ in size. The two cases were reconstructed by combined rotation and advancement of a cheek flap. This technique produced a good functional outcome that allowed for oral competence and created an opening of adequate size. A combination of rotation and an advancement flap can be used to treat upper lip defects in a single-stage procedure. This approach produces a good functional and cosmetic outcome.

• Steel and Composite Structures
• /
• 제37권5호
• /
• pp.571-587
• /
• 2020

In this article the seismic demand and performance of two recent braced steel frames named steel moment frames with the elliptic bracing (ELBRFs) are assessed through a laboratory program and numerical analyses of FEM. Here, one of the specimens is without connecting bracket from the corner of the frame to the elliptic brace (ELBRF-E), while the other is with the connecting brackets (ELBRF-B). In both the elliptic braced moment resisting frames (ELBRFs), in addition to not having any opening space problem in the bracing systems when installed in the surrounding frames, they improve structure's behavior. The experimental test is run on ½ scale single-story single-bay ELBRF specimens under cyclic quasi-static loading and compared with X-bracing and SMRF systems in one story base model. This system is of appropriate stiffness and a high ductility, with an increased response modification factor. Moreover, its energy dissipation is high. In the ELBRF bracing systems, there exists a great interval between relative deformation at the yield point and maximum relative deformation after entering the plastic region. In other words, the distance from the first plastic hinge to the collapse of the structure is fairly large. The experimental outcomes here, are in good agreement with the theoretical predictions.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.18-22
• /
• 2004

The Fire Dynamics Simulator (FDS) was applied to a center fire in a room, of which dimensions were 1.8m${\times}$1.38m with an opening of 0.45m${\times}$1.2m doorway, to evaluate the numerical method. The time-variation of temperature at a top point of thedoorway centerline and distributions of evaluate the numerical method. The time-variation of temperature at a top point of the doorway centerline and distributions of average temperature along the doorway centerline and corner stack were compared with measurements for three different fire sizes, 7.65, 21.25 and 51.71kW. The results showed FDS predicted a very rapid fire growth compared with the experiment for all the three fire sizes, that is an importand shortcoming of FDS in compartment fire simulations. The average temperature distributions, and heights of hot gas layers and neutral planes in steady state were in reasonable agreement with the measurements.