• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.84-91
• /
• 2015

SMART adopts, very unique facility, an FMHA to enhance the thermal and flow mixing capability in abnormal conditions of some steam generators or reactor coolant pumps. The FMHA is important for enhancing thermal mixing of the core inlet flow during a transient and even during accidents, and thus it is essential that the thermal mixing characteristics of flow of the FMHA be understood. Investigations for the mixing characteristics of the FMHA had been performed by using experimental and CFD methods in KAERI. In this study, the temperature distribution at the core inlet region is investigated for several abnormal conditions of steam generators using the commercial code, FLUENT 12. Simulations are carried out with two kinds of FMHA shapes, different mesh resolutions, turbulence models, and steam generator conditions. The CFD results show that the temperature deviation at the core inlet reduces greatly for all turbulence models and steam generator conditions tested here, and the effect of mesh refinement on the temperature distribution at the core inlet is negligible. Even though the uniformity of FMHA outlet hole flow increases the thermal mixing, the temperature deviation at the core inlet is within an acceptable range. We numerically confirmed that the FMHA applied in SMART has an excellent mixing capability and all simulation cases tested here satisfies the design requirement for FMHA thermal mixing capability.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.50-50
• /
• 1994

Half-metallic Heusler alloys (NiMnSb, ppdMnSb, pptMnSb) have attracted much attention due to their unique electronic and magnetic structures. Sppin-ppolarized band structure calculation ppredicts metallic behavior for the majority sppin states and semiconductor behavior for the minority sppin states. We have studied the electronic structures of these half-metallic Heusler alloys by core-level pphotoemission sppectroscoppy of Mn 2pp and 3s XppS sppectra. We found large intensities of Mn 2pp satellites and 3s exchange spplitting comppared with other metal Mn-alloys. These satellite structure can be understood by applying Anderson imppurity model. This fact supports the calculated sppin pprojected ppartial density of states which suggests that the valence electrons be highly sppin ppolarized near Fermi level and that the electrons involved with charge-transfer be mainly minority sppin ones which have semiconducting band structure. The trend of charge transfer energies Δ from ligands (Sb 5pp) to Mn 3d, obtained from our model fitting, is consistent with that calculated from sppin pprojected ppartial density of state. Also the trend of d-d electron correlation energies U calculated from Mn Auger line L3 VV by Mg $K\alpha$ source is comppatible with that resulted from our model fitting. We fitted the Mn 3s curve in the same way as for insulating Mn comppounds by using the same pparameters calculated from Mn 2pp curve fitting exceppt for the Coulomb interaction energy Q between core hole and d-electrons. The 3s sppectra were analyzed by combing the charge transfer model and a simpple model taking into account the configuration mixing effect due to the intra-shell correlation. We found that the exchange interaction between 3s hole and 3d electrons is mainly respponsible for the satellite of Mn 3s sppectra. This is consistent with the neutron scattering data, which suggests local 3d magnetic moment. We find that the XppS analysis results of Mn 2pp and 3s satellite structures of half-metallic Heusler alloys are very similar to those of insulating transition metal comppounds.

• Advances in Energy Research
• /
• 제5권2호
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• 대한토목학회논문집
• /
• 제2권3호
• /
• pp.1-13
• /
• 1982

원구멍과 타원구멍을 갖는 두 개의 강판(鋼板)에 완전교번하중(完全交番荷重)(completely reversed load, completely alternating load ;같은 크기의 인장(引張) 압축(壓縮)의 반복)을 가할 때 유한요소법(有限要素法)을 써서 강복요소(降伏要素)가 발생하는 단계마다 각 절점(節點)의 변위(變位), 각 요소(要素)의 응력(應力) 및 변형률(變形率), 하중(荷重)의 크기 등을 계산하여 파괴력학적(破壞力學的)인 검토를 행하였다. 이로부터, 강판(鋼板)의 파괴기구(破壞機構)를 밝히는 데에 핵심이 된다고 생각되는 응력확대계수(應力擴大係數)를 계산할 수 있는 토대가 마련되었으며, 흠선단(先端)의 응력집중(應力集中)현상과 소성역(塑性域)의 변화과정이 밝혀졌다. 또, 재하(載荷) 중에 강복(降伏)을 경험한 부분에서는 강하(降荷)때에 영구변형(永久變形)(잔류변형(殘留變形))이 남게 되고 이것이 나머지의 제하(除荷)를 구속(拘束)하여 반대방향의 재하(載荷)의 효과를 일으킴으로서 흠선단(先端)에 가까운 부분에는 인장(引張) 후의 제하(除荷) 때에 심지어 압축재강복(壓縮再降伏)까지, 압축(壓縮) 후의 제하(除荷) 때에는 심지어 인장재강복(引張再降伏)까지 일으키며 이들이 인장(引張) 및 압축(壓縮)의 재하(載荷) 중의 강복(降伏)과 교번(交番)으로 반복됨으로써 흠선단(先端)에 파로(波勞)현상을 초래하게 된다는 사실을 예견할 수 있었다. 아울러 흠이 원구멍일 때와 타원구멍일 때의 계산결과를 비교하여 홈이 예리한 균열에 가까워질수록 빨리 파괴에 달하게 된다는 사실을 확인할 수 있었다.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.115-127
• /
• 2019

본 연구의 대상 공법인 저유동성 그라우팅 주입공법은 모르타르를 주입재로 하여 비배출 치환원리에 의해 지중에 압입하는 공법으로서 지반의 밀도 증대효과를 기대할 수 있고 저소음, 저공해, 내구성 확보와 함께 경우에 따라서는 높은 주입 고결체의 강도를 이용한 기초파일로 사용할 수도 있다. 저유동성 주입공법으로 지반의 동적 특성이 향상됨을 확인하기 위하여 현장에서 시험시공을 실시하고 물리시험을 수행하였으며 코어에 대한 실내시험을 통해 지중에 형성된 개량체 품질을 확인하고 코어회수율 분석을 수행하였다. 밀도검층은 감마선의 컴프턴 산란을 이용하여 지층의 체적 밀도를 산정하였고, 음파검층은 시추공 내에서 음파발생 및 수신장치로 구성된 검층기를 이용하여 시추공 주변의 지반에 대해서 시험을 실시하였다. 그라우팅 전,후 물성변화(밀도검층, 음파검층)를 측정한 결과, 기본적으로 두 물성 모두 그라우트제 주입 후 물성이 증가하여 측정되었다. 다만, 그라우팅 후 속도 증가보다 밀도 증가의 변화 폭이 컸으며, 지반 밀도 측정 방법이 주입재의 충진 효과를 측정하는데 효과적이다. 재령 28일 후 채취한 시료로부터 강도 및 코어회수율을 측정하였으며, 시험결과 개량체의 확산 및 강도시험 결과가 설계기준을 만족시켜 내진성능보강을 만족한 것으로 확인하였다.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1979-1989
• /
• 1992

본 연구에서는 말굽와류에 대한 전반적인 사항을 고찰하는 한편, 실린더의 기 하학적 형상이 말굽와류에 미치는 영향을 정성적으로 고찰하는 데 있다. 그러므로 본 실험에서는 먼저 경계층이 형성되어 있는 평판에 원형 실린더를 설치하여, 말굽와 류에 의한 3차원 유동현상을 고찰하고, 또한 동일한 평판에 쐐기형상의 실린더를 설치 하여, 그 주위에서 발생하는 3차원 유동현상과 원형 실린더 주위에서 일어나는 3차원 유동현상과의 정성적인 비교를 통하여, 말굽와류에 의한 3차원 유동손실을 줄일 수 있 는 가능성을 제시하고자 한다.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1370-1377
• /
• 2005

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change of the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural integrity of the material capsule called 04M-17U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19.6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's in-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.782-787
• /
• 2005

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change or the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural Integrity of the material capsule called 04M-l7U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19 6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's In-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.98-100
• /
• 2008

A series of new channel materials using triisopropylsilylethynyl anthracene(TIPSAN) derivatives are synthesized by well known reaction. The TIPSAN derivatives exhibit an excellent field-effect mobility with hole mobility as high as 0.1 cm2V-1s-1 by solution-process and slip stack structure of core and end groups with short $\pi-\pi$ stacking distance of $3.525{\sim}3.485\;{\AA}$ by single crystal structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.886-889
• /
• 2000

This paper describes the machining characteristics of the MoSi$_2$-based composites by electric discharge drilling with various tubular electrodes. MoSi$_2$-based composites has been developed in new materials for jet engine of supersonic-speed airplanes and gas turbine for high- temperature generator. By combining a nonconducting ceramics with more conducting ceramic it was possible to raise the electrical conductivity. In drilling by EDM, the dielectric flushed down the interior of the rotating tube electrode, in order to facilitate the removal of machining debris from the hole. Various metal-coated tubular electrodes of which core are copper and brass are used to know the effect of coating material on machinability of ED drilling.