• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.226-232
• /
• 2018

We propose a triangular-multicore hollow optical fiber (TMC-HOF) design for uncoupled mode-division and space-division multiplexing. The TMC-HOF has three triangular cores, and each core has three modes: $LP_{01}$ and two split $LP_{11}$ modes. The asymmetric structure of the triangular core can split the $LP_{11}$ modes. Using the proposed structures, nine independent modes can propagate in a fiber. We use a fully vectorial finite-element method to estimate effective index, chromatic dispersion, differential group delay (DGD), and confinement loss by controlling the parameters of the TMC-HOF structure. We confirm that the proposed TMC-HOF shows flattened chromatic dispersion, low DGD, low confinement loss, low core-to-core crosstalk, and low crosstalk between adjacent modes. The proposed TMC-HOF can provide a common platform for MDM and SDM applications.

• Journal of the korean society of oceanography
• /
• 제38권2호
• /
• pp.45-51
• /
• 2003

Recent observations reveal that the Tsushima Current has a double-cored structure downstream of the Tsushima Island. To explain this, a simple analytical model is proposed based on the assumption of small lateral eddy viscosity. This model suggests that an otherwise uniform current becomes to have a stream core immediately after it enters a channel due to the action of lateral friction. The core is initially broad but becomes sharper downstream. The speed at which the core develops depends on the intensity of lateral eddy viscosity. Likewise, a single-cored stream changes rapidly to a double-cored stream when it passes through an island located in the center of the channel. When the stream leaves the island behind, the reverse process from the double-to single-cored structures takes place. In this case, however, the double-cored structure is retained for a significant distance from the island. Overall, this model suggests that the double-cored structure of the Tsushima Current observed downstream of the Tsushima Island Is created by the lateral friction exerted by the Tsushima Island.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2015

Two axial flux permanent magnet (AFPM) machines using soft magnetic composite (SMC) and lamination steel are studied. Generally stator cores of AFPM machines are manufactured using SMC because AFPM machines need 3 dimensional core structures. However, SMC cores have very disadvantages in magnetic properties. Especially permeability value is much lower than that of lamination steel, so magnetic field density is also lower. In terms of core losses, SMC cores have much larger loss values than lamination steel cores because SMC core can't be laminated. In this study, AFPM machine was designed using laminated steel, and iron losses in two machines using SMC and laminated steel were studied. Simulations were carried out by a commercial 3-D FEM tool.

• Applied Biological Chemistry
• /
• 제46권4호
• /
• pp.305-310
• /
• 2003

Hydrophobic core가 변이된 유비퀴틴 단백질이 pH 2 용액에서 보이는 구조적인 특성을 여러 분광학적 방법으로 측정하였다. 낮은 pH값을 갖는 용액에서 이 변이 유비퀴틴의 intrinsic tryptophan fluorescence emission spectrum은 unfolded 상태보다 약간 blue shift되어 있고 또한 그 intensity도 상당히 낮게 나타났다. 이는 이 용액 조건에서 이 변이 유비퀴틴의 삼차구조가 약간 남아 있는 것을 의미한다. 같은 용액에서 이 변이 유비쥐틴의 far-UV circular dichroic spectrum은 native 상태나 unfolded 상태의 spectrum과 현저히 달랐으며 220 nm 에서의 molar ellipticity 값을 통하여 볼 때 pH 2인 용액에서 상당량의 이차구조를 지니고 있었다. 또한 같은 용액에서 이 변이 유비퀴틴은 hydrophobic dye인 8-anilinonaphthalene-1-sulfonic acid(ANS)외 fluorescence emission intensity를 증가시키고 fluorescence emission maximum이 짧은 파장에서 나타나게 하였다(blue shift). 이러한 현상은 pH 2 용액에서 이 변이 유비퀴틴의 hydrophobic core가 느슨하여져서 hydrophobic dye인 ANS가 결합할 수 있는 구조를 띠고 있음을 나타낸다. 이러한 분광학적인 관찰은 이 변이 유비귀틴이 pH 2인 용액에서 상당량의 이차구조를 지니고 있지만 hydrophobic core는 느슨하게 형성된 molten globule과 같은 형태를 지니고 있음을 나타낸다. 이 변이 유비퀴틴의 molten 히obule 형태는 단백질 폴딩 반응의 경로를 연구할 수 있는 좋은 모델이 될 수 있을 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.47-47
• /
• 2009

The formation of variable one-dimensional structures including core/shell structure is of particular significance with respect to potential applications for thermoelectric devices with the enhanced figure of merit ($ZT=S2{\sigma}T/{\kappa}$). We report the fabrication of Bi-Te core/shell nanowire based on a novel stress induced method. Fig. 1 schematically shows the nanowire fabrication process. Bi nanowires are grown on the Si substrate by the stress-induced method, and then Te is evaporated on the Bi nanowires. Fig. 2 is a transmission electron microscopy image clearly showing a core/shell structure for which effective phonon scattering and quantum confinement effect are expected. Electrical conductivity of the core/shell nanowire was measured at the temperatures from 4K to 300K, respectively. Our results demonstrate that Bi-Te core/shell nanowire can be grown successfully by the stress-induced method. Based on the result of electrical transport measurement and characteristic morphology of rough surface, Seebeck coefficient and thermal conductivity of Bi-Te core/shell nanowires are presented.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2865-2870
• /
• 2013

Ni-Ag core-shell nanoparticles were synthesized by polyol process and microemulsion technique successfully. In the polyol process, a chemical reduction method for preparing highly dispersed pure nickel and Ag shell formation have been reported. The approach involved the control of reaction temperature and reaction time in presence of organic solvent (ethylene glycol) as a reducing agent for Ag cation with poly(vinyl-pyrrolidone) (PVP. Mw = 40000) as a capping agent. In microemulsion method, the emulsion was prepared by water/cetyltrimetylammonium bromide (CTAB)/cyclohexane. The size of microemulsion droplet was determined by the molar ratio of water to surfactant (${\omega}_o$). The core-shell formation along with the change in structural phase and stability against oxidation at high temperature heat treatments of nanoparticles were investigated by X-ray diffraction and TEM analysis. Under optimum conditions the polyol process gives the Ni-Ag core-shell structures with 13 nm Ni core covered with 3 nm Ag shell, while the microemulsion method gives Ni core diameter of 8 nm with Ag shell of thickness 6 nm. The synthesized Ni-Ag core-shell nanoparticles were stable against oxidation up to $300^{\circ}C$.

• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.29-37
• /
• 1990

In this study the disbonding tests of adhesively bonded Al/Al honeycomb structures were performed by ultrasonic methods. Ultrasonic C-scan squiter method and ultrasonic surface wave attenuation measuring method were applied for the detection of skin/core disbonding. The bonding quality of Al/Al honeycomb structures could be well evaluated by properly controlled ultrasonic parameters.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.597-605
• /
• 2021

An extended Fourier modal method (FMM) for optical dipole radiation in three-dimensional photonic structures is proposed. The core elements of the proposed FMM are the stable bidirectional scattering-matrix algorithm for modeling internal optical emission, and a novel optical-dipole-source model that prevents numerical errors induced by the Gibbs phenomenon. Through the proposed scheme, the FMM is extended to model a wide range of source-embedded photonic structures.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.271-277
• /
• 2014

원자로 노심 입구에 위치한 내부 구조물들은 형상 및 노심 입구까지의 상대적 거리에 따라 노심 입구 유량분포에 상당한 영향을 미칠 수 있다. 본 연구에서는 원자로 내부 구조물 형상 처리 방법이 축소 APR+ 유동분포 예측 정확도에 미치는 영향을 조사하기 위해 상용 전산유체역학 소프트웨어인 ANSYS CFX R.14를 사용하여 원자로 내부 구조물들의 실제 형상을 고려한 계산을 수행하였고 다공성 매질 가정을 적용한 계산 결과와 비교하였다. 결론적으로 노심 입구 상류에 위치한 원자로 내부 구조물의 실제 형상을 고려함으로써 노심 입구 유량 분포를 더 정확하게 예측할 수 있었다. 따라서 충분한 계산 자원이 확보된 조건인 경우라면 정확한 노심 입구 유량분포를 계산하기 위해 노심 입구 상류에 위치한 원자로 내부 구조물들(예: 하부지지구조물 바닥판 및 노내 계측기 노즐 지지판)의 실제 형상을 고려해서 계산하는 것이 필요하다.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.151-176
• /
• 2017

This paper deals with general equations of motion for free vibration analysis response of thick three-layer doubly curved sandwich panels (DCSP) under simply supported boundary conditions (BCs) using higher order shear deformation theory. In this model, the face sheets are orthotropic laminated composite that follow the first order shear deformation theory (FSDT) based on Rissners-Mindlin (RM) kinematics field. The core is made of orthotropic material and its in-plane transverse displacements are modeled using the third order of the Taylor's series extension. It provides the potentiality for considering both compressible and incompressible cores. To find these equations and boundary conditions, Hamilton's principle is used. Also, the effect of trapezoidal shape factor for cross-section of curved panel element ($1{\pm}z/R$) is considered. The natural frequency parameters of DCSP are obtained using Galerkin Method. Convergence studies are performed with the appropriate formulas in general form for three-layer sandwich plate, cylindrical and spherical shells (both deep and shallow). The influences of core stiffness, ratio of core to face sheets thickness and radii of curvatures are investigated. Finally, for the first time, an optimum range for the core to face sheet stiffness ratio by considering the existence of in-plane stress which significantly affects the natural frequencies of DCSP are presented.