• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1168-1171
• /
• 2003

In contrast to a conventional transformer, the flat transformer is made using a number of small ferrite cores. Two cores for transformer and one core for inductor, which composed one module. Many modules can be connected together to form a flat matrix transformer. This structural arrangement eliminates the single hot spot problem in conventional transformers and permits high current density pertains at high frequency. In this study, the ferrite magnetic cores of Mn-Zn system for the Flat transformer were manufactured and the electrical and magnetic characteristics of its tested. The power loss of sample FO2(Mn-Zn ferrite) sintered at $1350^{\circ}C$ was $350kW/m^3$ in test conditions of 250kHz, 200mT and $100^{\circ}C$, which showed the good power loss property in high frequency. The power loss of FO2 samples has been studied as a function of magnetic flux density and frequency. Steinmetz exponent was 2.82 at 250kHz and 2.73 at 500kHz. These results illustrated the switching of power loss mechanism in ferrite core from hysteresis losses to eddy current losses or others.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• 패션비즈니스
• /
• 제19권4호
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• 한국콘텐츠학회논문지
• /
• 제15권11호
• /
• pp.1-9
• /
• 2015

감성인식을 규칙적으로 제어하고 변화하려는 감성컴퓨터 연구에 관심이 집중되고 있다. 따라서 색채 감성컴퓨팅의 정량화한 객관적인 평가 방식 적용이 필수적인 상황이다. 이에 본 논문은 이미지 감성인식을 숫자화한 표현방식으로 색채 디지털 감성컴퓨팅 계산을 적용한다. 감성컴퓨팅 연구방식은 이미지에 집중된 감성인식인 색채 속성으로 구성하고, 색채 감성속성은 색상, 명도, 채도로 구분한다. 감성속성의 비중톤 증감에 따른 감성점수와 가중치를 감성식에 적용하여 계산한다. 감성계산식은 쾌정도(X축), 긴장도(Y축)를 계산한다. 그리고 감성좌표에 쾌정도(X축), 긴장도(Y축)의 교차점을 감성점으로 위치한다. 감성좌표는 러셀의 핵심 효과(Core Affect)를 활용한다. 감성점 위치에서 대표감성크기와 감성상관관계를 숫자화하고, 색채 감성컴퓨팅을 통해 정량화한다.

• 한국지반공학회논문집
• /
• 제32권11호
• /
• pp.51-60
• /
• 2016

본 연구에서는 필댐 심벽부 전단파 속도 주상도 결정시 심벽부 내부에 존재하는 물성치 공간 변동성에 의해 발생 가능한 불확실성을 평가하고 이러한 불확실성이 반영된 개별 댐 전단파 속도 주상도 모델 결정 방법을 제안하였다. 또한 국내 7곳의 필댐 심벽부에서 수행된 결과들을 이용하여 댐 사이에 존재하는 물성치 공간 변동성에 의해 전단파 속도 주상도 결정시 발생 가능한 불확실성을 평가하고, 개별 댐 심벽부 내부 및 댐 사이에 존재하는 물성치 공간 변동성에 의한 불확실성이 모두 고려된 국내 필댐 심벽부를 위한 전단파 속도 주상도 모델을 제안하였다. 제안된 모델은 Sawada-Takahashi 모델과 비교하였으며, 김종태 등에 의해 제안된 모델과 비교하였다.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• 지구물리
• /
• 제2권4호
• /
• pp.269-276
• /
• 1999

암석의 코어비저항 값을 올바르게 결정하기 위한 노력의 일환으로 비저항 측정에 있어서 샘플홀더의 영향을 분석하고 시계열자료로부터 암석의 비저항을 대표할 수 있는 비저항 값을 효과적으로 구하는 방안에 관하여 연구하였다. 샘플홀더에 대한 연구로는 기존의 GS식과 2전극식 방법과 함께 코어시료 표면을 전도성 접착제로 처리한 변형 GS식 및 변형 2전극식을 고안하여 각 특성을 비교하였으며 그 중에서 변형 2전극식이 측정자료의 안정성과 측정의 편이성 측면에서 장점이 있는 것으로 확인되었다. 샘플홀더 및 사용 소스 주파수의 차이에 따라 달리 나타나는 시계열자료의 분포특성에 관한 분석 결과는 최대곡률점을 이용하여 암석의 대표비저항을 결정하는 방법이 효과적임을 보이고 있다.

• 정보처리학회논문지D
• /
• 제16D권5호
• /
• pp.747-754
• /
• 2009

소프트웨어 프로덕트 라인은 일련의 관련된 시스템들, 즉 도메인 내에서 재사용될 가능성이 높은 공통된 부분들을 식별하고, 시스템마다 상이하게 나타나는 가변적 요소들의 분석을 통해 핵심 자산을 생성하는 방법이다. 이러한 프로덕트 라인 개념은 객체 및 컴포넌트 기반의 소프트웨어 개발 패러다임에 적용되어 소프트웨어 개발의 생산성을 증대시켰다. 최근 들어 소프트웨어 개발의 패러다임은 서비스라는 핵심 자산을 이용하여 소프트웨어를 개발하는 서비스 지향 패러다임으로 변화하고 있다. 따라서 이러한 패러다임하에서 비즈니스 변화에 민첩하게 대응하고, 체계적이고 유연한 서비스 지향 소프트웨어 개발을 할 수 있도록 핵심 자산인 서비스 생성 방법은 프로덕트 라인 기법을 적용시킬 필요가 있다. 본 논문에서는 서비스 지향 패러다임과 프로덕트 라인의 결합을 통해 소프트웨어 개발의 핵심 자산인 도메인 서비스를 개발하고 기술하는 방법에 대해 제시한다. 도메인 서비스는 도메인 서비스 공통적/선택적 속성 가변성, 오퍼레이션 타입의 가변성, 메시지 타입의 가변성을 통해 공통성과 가변성이 명확히 기술되도록 한다. 본 논문에서 제시하는 방법을 통해 유사한 기능을 가진 도메인 서비스를 목적에 맞게 커스터마이즈하여 다양한 서비스를 생성하게 함으로써 서비스 지향 개발을 유연하고 효율적으로 수행할 수 있다.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.231-253
• /
• 2021

Pure bending loading conditions are not frequently occurred in practical engineering, but the flexural researches are important since it's the basis of mechanical property researches under complex loading. Hence, the objective of this paper is to investigate the flexural behavior of concrete-filled rectangular steel tube (CFRT) through combined experimental and numerical studies. Flexural tests were conducted to investigate the mechanical performance of CFRT under bending. The load vs. deflection curves during the loading process was analyzed in detail. All the specimens behaved in a very ductile manner. Besides, based on the experimental result, the composite action between the steel tube and core concrete was studies and examined. Furthermore, the feasibility and accuracy of the numerical method was verified by comparing the computed results with experimental observations. The full curves analysis on the moment vs. curvature curves was further conducted, where the development of the stress and strain redistribution in the steel tube and core concrete was clarified comprehensively. It should be noted that there existed bond slip between the core concrete and steel tube during the loading process. And then, an extensive parametric study, including the steel strength, concrete strength, steel ratio and aspect ratio, was performed. Finally, design formula to calculate the ultimate moment and flexural stiffness of CFRTs were presented. The predicted results showed satisfactory agreement with the experimental and FE results. Additionally, the difference between the experimental/FE and predicted results using the related design codes were illustrated.