• Journal of the Korean Society of Environmental Restoration Technology
• /
• 제12권4호
• /
• pp.1-10
• /
• 2009

This study has intended to build ecological networks in consideration of life-zones inside Cheongju city through biotope grade, GIS network analysis etc. This study consisted of following three steps. First, we selected core districts and core spot districts using land use patten and biotope grade. The core district included the first grade of biotope and forest land. The core district consisted of two sectors : east axis core, Uam mountain; west axis core, Bumo mountain. The core spot district included the first grade of biotope. The core spot districts consisted of two sectors : north axis base core, Myongshim park; south axis base core, Guryong park. Second, the base district included the second grade of biotope and park and school. We used buffering analysis within 500m of the base district and selected the new base district. Third, we connected core districts and base core districts using least cost analysis of GIS. Thus we built comprehensive ecological networks in consideration of life-zones through GIS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.92-96
• /
• 1997

Recently, the life cycle of products is rapidly shortened and then the disposal of the used mold applied in development of the product is a difficult thing. In this study, we proposed the feasibility of new 3plate type mold base for recycling by analyzing of the existing standard mold base. And in order to apply new 3plate mold base in mold design and making, we constructed the specifications for parts such as runner stripper plate, cavity plate, core plate and slide core unit. Also, we confirmed the possibility of recycling mold base by testing a used 3plate mold for a Audio front pannel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제31권2호
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• International Journal of Knowledge Content Development & Technology
• /
• 제3권1호
• /
• pp.81-95
• /
• 2013

Through a series of precise text handling processes, including automatic extraction of information from documents with knowledge from various fields, recognition of entity names, detection of core topics, analysis of the relations between the extracted information and topics, and automatic inference of new knowledge, the most efficient knowledge base of the relevant field is created, and plans to apply these to the information knowledge management and service are the core requirements necessary for intellectualization of information. In this paper, the knowledge base, which is a necessary core resource and comprehensive technology for intellectualization of science and technology information, is described and the usability of academic information services using it is evaluated. The knowledge base proposed in this article is an amalgamation of information expression and knowledge storage, composed of identifying code systems from terms to documents, by integrating terminologies, word intelligent networks, topic networks, classification systems, and authority data.

• Journal of the Korean Society for Precision Engineering
• /
• 제20권6호
• /
• pp.123-129
• /
• 2003

Recently, the life cycle of products is rapidly shortened and then the disposal of the used mold applied in development of the product is a difficult thing. In this study, we proposed the feasibility of new three plate type mold structure for recycling by analyzing of the existing standard mold base. And in order to apply new three plate mold structure in mold design and making. we constructed the specifications for mold parts such as runner stripper plate, cavity plate, core plate and slide core unit. Also, we confirmed the possibility of recycling mold base by testing a used three plate mold for audio front panel.

• Transactions of Materials Processing
• /
• 제23권6호
• /
• pp.386-391
• /
• 2014

In the current study, Al-Mn-Zn alloys are strip-cast and used as the base alloy for the core of aluminum clad sheets used in automotive condenser fins. Transition elements such as Cu and Cr are added to the base core alloy in order to improve the properties of the clad sheets. The AA4343/Al-Mn-Zn-X(X: Cu, Cr)/AA4343 clad sheets are fabricated by roll bonding and further cold-rolled to a thickness of 0.08 mm. Clad sheets were intermediately annealed during cold rolling at $450^{\circ}C$ in order to obtain 40% reduction at the final thickness. Tensile strength and sag resistance of the clad sheets are improved by Cu additions to the core alloy, while corrosion resistance is also increased. Cr-additions to the clad sheets enhance sag resistance and provide low enough corrosion, although tensile strength is not improved. The effect of Cu and Cr additions on the properties of the clad sheets is elucidated by microstructural analysis.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제41권4호
• /
• pp.379-384
• /
• 1992

The Fe-base amorphous ribbons with 15mm width and about 20x10S0-6Tm thickness, (FeS179-xTCrS1xT)BS116TSiS15T and (FeS181-xTMnS1xT) BS112TSiS17T (x:0-6), were prepared melt spinner. The thickness of the ribbons followed by PFC (Planar Flow Casting). The initial permeability and total core losses were measured as a function of additive elements (Cr, Mn) and annealing conditions in high frequency for the purpose of using these materials as a core of magnetic amplifier and switched mode power supplies. The initial permeabilities were enhanced and core losses were decreased by non-magnetic field annealing in proper conditions. The lowest core loss in 0.2T/10kHz was measured at 3% Cr addition amorphous ribbon, and the loss was 5.6W/kg. The permeability of the ribbon at 10kHz was about 9000.

• Nuclear Engineering and Technology
• /
• 제40권4호
• /
• pp.285-298
• /
• 2008

This study evaluates the performance of a coil spring-viscous damper system for the vibration and seismic isolation of an Emergency Diesel Generator (EDG) by measuring its operational vibration and seismic responses. The vibration performance of a coil spring-viscous damper system was evaluated by the vibration measurements for an identical EDG set with different base systems - one with an anchor bolt system and the other with a coil spring-viscous damper system. The seismic performance of the coil spring-viscous damper system was evaluated by seismic tests with a scaled model of a base-isolated EDG on a shaking table. The effects of EDG base isolation on the fragility curve and core damage frequency in a nuclear power plant were also investigated through a case study.

• Korean Journal of Breeding Science
• /
• 제41권4호
• /
• pp.369-376
• /
• 2009

Cowpea might have been introduced from China to Korea and cultivated for several hundred years but it has never been a staple food crop in Korea. In this study, genetic diversity of 492 Korean cowpea landrace accessions that have passport information was estimated using six SSR markers. The mean of Weir's gene diversity was 0.665 from all accessions investigated in the study. Cowpea gene diversity of six local provinces in Korea was ranged from 0.370 in accessions of Gangwon to 0.680 in Jeonra provinces. Low gene diversity of the cowpea genepool of Gangwon province was probably derived from relatively few introductions. Especially SSR markers VM36 and VM39 seem to be good markers to distinguish the Gangwon accessions from others by occurring at a specific locus with higher than 78% of allele frequency. Except for the Gangwon province with the low genetic diversity, gene diversity of cowpea accessions from other provinces was ranged from 0.600 to 0.680 indicating no big differences among provinces. Distribution pattern of the allele frequencies was similar among the other provinces. This may reveal that Korean farmers might exchange cowpea seeds easily with even their neighbors with geographical barriers. A core collection, 100 landraces, ca. 20% of base collection, was developed at the 70% of a similarity coefficient level using random sampling approaches after stratification of the entire landrace collection based on the phenetic dendrogram. The variability of SSR in the base and core collections of Korean cowpea landrace was compared by calculating Weir's gene diversity. The mean of Weir's gene diversity of the core was 0.707 while that of the base collection was 0.665. The higher diversity index in the core collection indicates that it maintains the initial variability and well represents the base collection. The core collection included one of determinate accession (IT 216155) and two of no branching type accessions (IT 103959 and IT 161024). The core collection could be used to guide more efficient management and utilization of the entire collection. This core collection should be revised periodically as additional accessions are collected and further characterization is conducted.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.515-530
• /
• 2021

In a tall reinforced concrete (RC) core wall system subjected to strong ground motions, inelastic behavior near the base as well as mid-height of the wall is possible. Generally, the formation of plastic hinge in a core wall system may lead to extensive damage and significant repairing cost. A new configuration of core structures consisting of buckling restrained braced frames (BRBFs) and RC walls is an interesting idea in tall building seismic design. This concept can be used in the plan configuration of tall core wall systems. In this study, tall buildings with different configurations of combined core systems were designed and analyzed. Nonlinear time history analysis at severe earthquake level was performed and the results were compared for different configurations. The results demonstrate that using enough BRBFs can reduce the large curvature ductility demand at the base and mid-height of RC core wall systems and also can reduce the maximum inter-story drift ratio. For a better investigation of the structural behavior, the probabilistic approach can lead to in-depth insight. Therefore, incremental dynamic analysis (IDA) curves were calculated to assess the performance. Fragility curves at different limit states were then extracted and compared. Mean IDA curves demonstrate better behavior for a combined system, compared with conventional RC core wall systems. Collapse margin ratio for a RC core wall only system and RC core with enough BRBFs were almost 1.05 and 1.92 respectively. Therefore, it appears that using one RC core wall combined with enough BRBF core is an effective idea to achieve more confidence against tall building collapse and the results demonstrated the potential of the proposed system.