• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.421-425
• /
• 2009

This research investigates the effect of copper retention on copper leaching in wood treated with copper-based preservatives. Radiata pine (Pinus radiata D. Don) sapwood samples were ground in a Wiley mill equipped with a 20-mesh screen. The ground wood was vacuum-treated with various concentrations of alkaline copper quat (ACQ), bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO), and copper azole (CUAZ). The treated samples were conditioned at $70^{\circ}C$ and 100% RH for 72 hours. The samples were leached by using the distilled water for four weeks, and the copper contents in each sample were measured by X-ray spectroscopy. As expected, the copper leaching was increased with increasing of copper retention. The copper leaching from the ACQ and CB-HDO treated samples were gradually decreased with increasing copper retention: however, the copper losses from the CUAZ treated samples appeared to be proportionally increased with the increase in copper retention in all retention levels tested. The results indicate that at the conditions of the same copper retention ACQ and CB-HDO treated wood have a better leaching resistance compared to CUAZ treated wood.

• 분석과학
• /
• 제37권1호
• /
• pp.63-78
• /
• 2024

The continuous increasing of the global demand of copper and nickel metals raises the interest in developing alternative technologies to produce them from copper sulfide ore. Also, in line with Egypt's vision 2030 for achieving the sustainable socioeconomic development which aims at developing alternative and eco-friendly technologies for processing the Egyptian ores to produce these strategic products instead of its importing. These metals enhance the advanced electrical and electronic industries. The current work aims at investigating the recovery of copper and nickel from Abu Swayeil copper ore using pug leaching technique by sulfuric acid. The factors affecting the pug leaching process including the sulfuric acid concentration, leaching time and temperature have been investigated. The copper ore sample was characterized chemically using X-ray fluorescence (XRF) and scanning electron microscope (SEM-EDX). A response surface methodology develops a quadratic model that expects the nickel and copper leaching effectiveness as a function of three controlling factors involved in the procedure of leaching was also investigated. The obtained results showed that the maximum dissolution efficiency of Ni and Cu are 99.06 % and 95.30%, respectively which was obtained at the following conditions: 15 % H₂SO₄ acid concentration for 6 hr. at 250 ℃. The dissolution kinetics of nickel and copper that were examined according to heterogeneous model, indicated that the dissolution rates were controlled by surface chemical process during the pug leaching. The activation energy of copper and nickel dissolution were 26.79 kJ.mol^-1 and 38.078 kJ.mol^-1 respectively; and the surface chemical was proposed as the leaching rate-controlling step.

• 미생물학회지
• /
• 제12권1호
• /
• pp.25-30
• /
• 1974

It was convinced that with a relatively small capital investment and with a low operating cost, appreciable amounts of cement copper could be produced from low-grade minerals by the application of a bacterial leaching method. For the recovery of cement copper from the impure pregnant solution, direct precipitation of copper with tin plates by a bacterial leaching method was feasible. The results obtained were as follows: 1)In order to remove the cement copper from the reducing metal, aeration and agitation method were more effective and economic than shaking method. 2)The rate of copper recovery from the pregnant solution was accerelated according to increasing quantities of reducing metal. However, the excess of reducing metal reduced the grade of cement copper. 3)Among the comparative experiments of copper recovery at each reaction temperature of $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, the recovery rate of copper at $30^{\circ}C$from the pregnant solution was highest. 4)Direct cementation method on iron-containing metal was an excellent method for the recovery of cement copper in bacterial leaching.

• 미생물학회지
• /
• 제11권4호
• /
• pp.189-195
• /
• 1973

With the gradual expansion of copper demands, the utilization of enormous tonnages of waste copper mineral containig up to 0.5% copper becomes available. In order to investigate the possibilities on the application of bacterial leaching method to waste dumps or abandoned mines, the authors had carried out microbial leaching of copper minerals by F.ferrooxidans isolated from the Dalsung copper mine water. The results obtained were as follows : 1. The copper extraction rate from the Dalsung chalcopyrite has been a little accerelated by using flasks in place of percolators. 2. The percentage of copper extracted from the Dalsung chalcopyrite sample was 100% in 30 days in the presence of iron-oxidizing bacteria F.ferrooxidans while 9.27% in the absence of bacteria. 3. F.ferroxidans was capable of producing sufficient quantities of ferric sulfate and sulfuric acid from ferrous iron to bring about the dissolution of 100% of copper from the Dalsung chalcopyrite.

• 자원리싸이클링
• /
• 제17권6호
• /
• pp.24-33
• /
• 2008

전해생성염소를 산화제로 사용하여 폐인쇄회로기판으로부터 구리의 침출에 대한 연구를 수행하였다. 구리침출반응과 관련된 실험인자들의 영향을 정량적으로 파악하기 위하여 실험계획법을 적용하였다. 실험결과의 분산분석으로부터 전류밀도, 침출온도, 염산농도 그리고 침출온도와 염산농도의 교호작용 등이 구리침출에 유효한 인자로 나타났다. 이들 중 구리침출에 가장 큰 영향을 미치는 인자는 침출실험 결과해석의 95.7%출 차지하는 전류밀도로 분석되었다. 실험결과의 중회귀분석을 이용하여 침출실험 결과의 99%를 설명할 수 있는 침출 모델식을 얻었다. 또한 모델식을 통한 구리 등침출선의 예측으로부터 침출온도가 높아질수록 구리침출량의 증가에 대한 염산농도의 영향이 커지는 것을 알 수 있었다.

• 자원리싸이클링
• /
• 제25권5호
• /
• pp.57-63
• /
• 2016

본 연구는 호주산 저품위 동광의 선광실험결과로 얻은 고품위 광물의 황산화 배소 및 선택적 침출반응 조건 확립을 통해 유가 광물 중에 함유된 성분을 선별적으로 용해해냄으로써 철 성분을 비롯한 불순물을 줄이거나, 동 및 니켈 성분을 용해 혹은 잔사에 잔류시킴으로써 유가금속회수를 효과적으로 회수하고자 하는데 목적이 있다. 본 연구실험결과 얻은 최적조건은 황산화 배소시 $450^{\circ}C$, $Na_2SO_4$ 2 mole ratio 및 1.5 h이었고, 배소산물의 침출온도는 상온 및 침출제는 $H_2O$ 혹은 1M $H_2SO_4$이었다. 최적조건 하에서 Cu 성분은 90 wt.% 침출율을 Fe성분은 20 wt.%내외, Ni성분은 15 wt.% 정도를 나타내는 것으로 보아 선택적 분해침출이 가능하다.

• 자원리싸이클링
• /
• 제21권5호
• /
• pp.3-17
• /
• 2012

암모니아 습식제련공정은 철과 칼슘의 용해를 억제하며 구리 등의 금속을 선택적으로 침출이 가능한 장점이 있어 구리, 금, 니켈 및 코발트 등의 금속을 선택적으로 침출하기 위한 연구가 수행되어왔다. 이 글에서는 모터스크랩과 폐인쇄회로기판으로부터 구리의 선택적 침출, 티오황산염 사용 등 시안의 대체 및 저감을 위한 금의 암모니아침출, 산화니켈광 및 망간단괴처리공정 중간산물로부터 니켈과 코발트를 회수하기 위한 암모니아침출 기술개발동향을 정리하고 국내 연구개발방향을 제시하고자 하였다.

• 한국분말재료학회지
• /
• 제16권5호
• /
• pp.351-357
• /
• 2009

A two-step recovery method was developed to produce copper powders from copper chloride waste solution as byproducts of MoO$_3$ leaching process. The first step consisted of replacing noble copper ions with external Fe$^{3+}$ ions which were formed by dissolving iron scraps in the copper chloride waste solution. The replaced copper ions were subsequently precipitated as copper powders. The second step was cementation of entire solution mixture to separate (pure) copper powders from aqueous solution of iron chloride. Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRD, SEM-EDS and laser diffraction and scattering methods.Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99% purity and average 1$\sim$2$\mu$m in size.

• 대한화학회지
• /
• 제11권1호
• /
• pp.38-43
• /
• 1967

In order to explain the positive catalytic action of copper compound for the rate of leaching of zinc sulfide minerals, the electrode and redox potentials of both synthetic and natural sulfides were measured at various conditions of temperatures and pressures. The potentials of Chalcopyrite and copper sulfide were considerably higher than that of zinc sulfide, whereas lead sulfide and Galena had slightly lower potentials than that of zinc sulfide. At elevated temperatures and pressures, the same tendency was obtained. By means of comparing the calculated and measured values of potentials for sulfides, it was suggested that the electrode potentials in acid solution were generated by oxidation of sulfur ion. As a result, it was concluded that the catalytic action of copper compound in the leaching of synthetic zinc sulfide should be arised from the galvanic action between sulfides keeping intimate contact one another in which copper sulfide worked as cathodic and zinc sulfide as anodic part analogous to the metal corrosion under galvanic action.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.405-411
• /
• 2012

Recovery of copper powder from copper chloride solution used in $MoO_3$ leaching process was carried out using a cementation method. Cementation is a simple and economical process, necessitating less energy compared with other recovery methods. Cementation utilizes significant difference in standard reduction potential between copper and iron under standard condition. In the present research, Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated using bench-scale cementation reaction system. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRF, SEM-EDS and laser diffraction and scattering methods. Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99.65% purity and average $1{\mu}m$ in size.