• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.481-487
• /
• 2001

Surface films formed prior to bulk reduction of lithium have been studied at gold, platinum, and copper electrodes in rigorously dried propylene carbonate solutions using electrochemical quartz crystal microbalance (EQCM) and secondary ion mass spectrometry experiments. The results indicate that the passive film formation takes place at a potential as positive as about 2.0 V vs. Li/Li+ , and the passive film thus formed in this potential region is thicker than a monolayer. Quantitative analysis of the EQCM results indicates that electrogenerated lithium reacts with solvent molecules to produce a passive film consisting of lithium carbonate and other compounds of larger molecular weights. The presence of lithium carbonate is verified by SIMS, whereas the lithium compounds of low molecular weights, including lithium hydroxide and oxide, are not detected. Further lithium reduction takes place underneath the passive film at potentials lower than 1.2 V with a voltammetric current peak at about 0.6 V.

• Clean Technology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2015

Hydrogen sulfide and ammonia are one of the common malodorous compounds that can be found in emissions from many sewages treatment plants and industrial plants. Therefore, removing these harmful gases from emissions is of significance in both life and industry because they can cause health problems to human and detrimental effects on the catalysts. In this work, pyrolytic carbon blacks from waste tires were used to develop adsorbent with good adsorption capacity for removal of hydrogen and ammonia. Pellet-type adsorbents were prepared by a mixture of carbon black, metal oxide and sodium hydroxide or hydrochloric acid, and their adsorption capacities were estimated by using breakthrough curve of a continuous fixed bed adsorption column at ambient condition. The adsorbent manufactured with a mixture of carbon black, iron oxide(III) and sodium hydroxide showed the maximum working capacity of hydrogen sulfide. For ammonia, maximum working capacity was obtained by the adsorbent manufactured with a mixture of carbon black, copper oxide(II) and hydrochloric acid.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.33-37
• /
• 2006

An equal-molar mixture of silver chloride (AgCl) and copper (Cu) was ground in atmosphere conditions using a planetary ball mill to investigate mechanochemical (MC) reaction for preparation of silver powders. The reaction causes the mixture of AgCl and Cu to change the composition of the mixture, such as silver (Ag) and cuprous chloride (CuCl). Through the leaching with ammonium hydroxide solution (1 mol), CuCl can be separated from MC product, so that pure Ag powders can be obtained as the final product. Moreover, polyvinylpyrrolidone (PVP) was used as the additive not only to improve dispersion of Ag pow- der during MC process, but also to control surface oxidation of Ag powders, prepared as the final product.

• Research in Plant Disease
• /
• v.18 no.3
• /
• pp.240-244
• /
• 2012

Burkholderia gladioli pv. alliicola CH1 showed typical soft rot symptoms at higher than $20^{\circ}C$ but very weak soft rot symptoms at temperature under $10^{\circ}C$. Among the nine agro-chemicals, oxolinic acid WP, streptomycin + copper hydroxide WP and streptomycin WP were found to be effective for the inhibition of the pathogen in vitro. The results of scanning electron microscopic investigation showed that onion bulbs was macerated by infection of B. gladioli pv. alliicola CH1. B. gladioli pv. alliicola CH1 was able to produce polygalacturonase but did not produce pectin lyase and carboxymethylcellulase. In analysis of the polygalacturonase activity of the isolated pectin-degradation enzymes from B. gladioli pv. alliicola CH1 total protein, three activity bands 45 kDa, 35 kDa, and 29 kDa were detected by the direct (or in-gel) activity staining on SDS-PAGE.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.216-222
• /
• 2002

In order to evaluate the antifungal activity of bacteria against plant pathogenic fungi, 8 bacteria were isolated from mushroom compost hot spring, seaweed, and forest soil and mutants from them were induced by $LD_{95}$ gamma radiation($^{60}Co$). Bacillus circulans K1, Burkholderia gladioli K4 and Bacillus subtilis YS1 showed wide antifungal spectrum against 12 kinds of plant pathogenic fungi. From the radiation sensitivity test, B. gladioli K4 was very sensitive to gamma radiation and its $D_{10}$ value was 0.11 kGy. Antifungal activities of B. circulans Kl-1004 and B. subtilis YS1-1009, which were induced by the radiation of $^{60}Co$ increased against Botryosphaeria dothidea. The mutant strains, B. subtilis YS1-1006 and B. subtilis YS1-1009 were resistant to tebuconazole and copper hydroxide. SAR535, SAR5108, and SAR5118 mutated from Streptomyces sp. SAR01 were antifungal activity deficient mutants against 5 kinds of plant pathogenic fungi compared to wild strain, so that they could be supposed to be model strains far studying antifungal mechanism. It is suggested that various functional types of mutants could be induced by gamma radiation and applied usefully.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.13-19
• /
• 2013

The effect of pH on the citrate leaching behavior of heavy metal ion was investigated to develop an eco-friendly process for removing heavy metals from soil contaminated with copper, zinc, and lead. The leaching tests were performed using citrate solution with pH adjusted by mixing citric acid and sodium citrate under the following leaching conditions: particle size, under $75{\mu}m$; temperature, $50^{\circ}C$; citrate concentration, $1kmol/m^3$; pulp density, 5%; shaking speed, 100 rpm; leaching time, 1 hour. The difference of pH before and after the leaching test was not observed, and this result indicates the direct effect of hydrogen ion concentration on the leaching of metals was insignificant. The removal ratios of copper, zinc, and lead from the contaminated soil decreased with increasing pH. The thermodynamic calculation suggests that the leaching behaviors of metal ions were determined by two reactions; one is the reaction to form complex ions between heavy metal ions and citrate ion species, and the other is the reaction to form metal hydroxide between heavy metal ions and hydroxide ion.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.175-180
• /
• 2015

A facile soft chemical synthesis route is used to grow nano-buds of copper hydroxide [$Cu(OH)_2$] thin films on stainless steel substrate[SS]. Besides different chemical methods for synthesis of $Cu(OH)_2$ nanostructure, the chemical bath deposition (CBD) is attractive for its simplicity and environment friendly condition. The structural, morphological, and electro-chemical properties of $Cu(OH)_2$ thin films are studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) measurement techniques. The results showed that, facile chemical synthesis route allows to form the polycrystalline, granular nano-buds of $Cu(OH)_2$ thin films. The electrochemical properties of $Cu(OH)_2$ thin films are studied in an aqueous 1 M KOH electrolyte using cyclic voltammetry. The sample exhibited supercapacitive behavior with $340Fg^{-1}$ specific capacitance. Moreover, electrochemical capacitive measurements of $Cu(OH)_2/SS$ electrode exhibit a high specific energy and power density about ${\sim}83Wh\;kg^{-1}$ and ${\sim}3.1kW\;kg^{-1}$, respectively, at $1mA\;cm^{-2}$ current density. The superior electrochemical properties of copper hydroxide ($Cu(OH)_2/SS$) electrode with nano-buds like structure mutually improves pseudocapacitive performance. This work evokes scalable chemical synthesis with the enhanced supercapacitive performance of $Cu(OH)_2/SS$ electrode in energy storage devices.

• Korean Journal of Organic Agriculture
• /
• v.19 no.3
• /
• pp.385-396
• /
• 2011

This study was carried out to develop environmental friendly control for major diseases and pests on Boxthorn (Lycium chinense Mill.). Outbreak of Eighteen diseases and pests were found at the Boxthorn organic yards in Chung-nam province. Among them Powdery mildew (Erysiphe polygoni de Cand.), Hypophyllous mold (Pseudocercospora chengtuensis (Tai)), Western flower trips (Frankliniella occidentalis (Pergande)), Green peach aphid (Myzus pericae (Sulzer)) and Corn earworm (Helicoverpa armigera) needed to be controled by environmental friendly methods for high fruit yield of organic Boxthorn. In summer(Jun) test Bacilus subtilis QST 713 wettable powder and Sulfur wettable powder were effective and in autumn (Sep.) test Sulfur, Copper hydroxide and Paraffinic oil were relatively effective in Powdery mildew. In Hypophyllous mold control test Paraffinic oil and Bacilus subtilis GB - 0365 were effective with above 70% control value. And it was possible to control Western flower trips by natural enemy (Orius laevigatus) by 80% control value. Corn earworm was possible to control by Bacillus thuringiensis subsp. aizawai GB413 flowable and Bacillus thuringiensis aizawa 0423 wettable powder application above 70%. And Green peach aphid was controllable with environmental friendly materials, such as, Bacillus subtilis (Seoncho), Bacillus subtilis (Jinsami) above 80% and Ginkgo nut extract above 70% control value.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.287-292
• /
• 2002

To establish effective and safe control method against Phytophthora root rot caused by Phytophthora capsici on tomato in hydroponic culture, three pesticides, oxadixyl copper hydroxide 8% WP, metalaxyl copper oxychloride 15% WP, and dimethomorph. dithianon 38% WP at 4 concentration levels were tested on potato dextrose agar medium inoculated with Phytophthora capsici. All pesticides inhibited mycelial growth, but two pesticides of them, metalaxyl copper oxychloride WP and dimethomorph. dithianon WP, were selected as effective pesticides for the efficacy test in a hydroponic culture. Forty days after transplanting of tomato seedlings, 4 ml of sporangia of P. capsici (about 25 sporangi/ml) per plot was inoculated around tomato plant root, and then 5 days after inoculation, the pesticides diluted at 5,000 times were drenched 1, 2 or 3 times per plot on the culture cube at 15 days interval. Fifteen days after drenching, tomato fruits and hydroponic culture solution were sampled for the analysis of pesticide residues. Dimethomorph was detected 0.001 and 0.003 mg/kg in tomato of the plots sprayed 2 and 3 times with dimethomorph dithianon WP of which detection levels were far below compared with 1.0 mg/kg of the Korean MRL of dimethomorph on tomato. Incidences of Phytophthora root rot were $30.5{\sim}50%$ in the plots drenched at 1 or 2 times with metalaxyl.copper oxychloride WP, and $16.7{\sim}25%$ in the plots treated with dimethomorph dithianon WP. However, there was no incidence of Phytophthora root rot in the plots treated at 3 times with both of pesticides, showing no phytotoxic effect. Based on the results, the drenching of these pesticides on the culture cube could be recommended as a very safe and effective control method for Phytophthora root rot in tomato.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.44-49
• /
• 2010

SiC powders have been recovered from silicon-containing waste slurry by carbothermal reduction method with carbon black. Large amount of silicon-containing waste slurry is generated from Solar Cell industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the silicon waste is important. In this study, SiC powder recovered by the reaction ball-milled silicon powder from waste and carbon black at $1350^{\circ}C$ for 3h under vacuum condition. Physical properties of samples have been characterized using SEM, XRD, Particle size analyzer and FT-IR spectroscopy.