• 한국표면공학회지
• /
• 제38권1호
• /
• pp.28-36
• /
• 2005

In this study, the reflow characteristics of copper thin films which is expected to be used as interconnection materials in the next generation semiconductor devices were investigated. Cu thin films were deposited on the TaN diffusion barrier by metal organic chemical vapor deposition (MOCVD) and annealed at the temperature between 250℃ and 550℃ in various ambient gases. When the Cu thin films were annealed in the hydrogen ambience compared with oxygen ambience, sheet resistance of Cu thin films decreased and the breakdown of TaN diffusion barrier was not occurred and a stable Cu/TaN/Si structure was formed at the annealing temperature of 450℃. In addition, reflow properties of Cu thin films could be enhanced in H₂ ambient. With Cu reflow process, we could fill the trench patterns of 0.16～0.24 11m with aspect ratio of 4.17～6.25 at the annealing temperature of 450℃ in hydrogen ambience. It is expected that Cu reflow process will be applied to fill the deep pattern with ultra fine structure in metallization.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1995년도 추계 학술발표 강연 및 논문개요집
• /
• pp.41-41
• /
• 1995

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제2회 총회 및 춘계학술발표회
• /
• pp.58-58
• /
• 1999

• 한국재료학회지
• /
• 제14권8호
• /
• pp.552-557
• /
• 2004

Thin Ni-B films, 1 ${\mu}m$ thick, were electrolessly deposited on Cu bus electrode fabricated by electro deposition. The purpose of these films is to encapsulate Cu electrodes for preventing Cu oxidation and to serve as a diffusion barrier against copper contamination of dielectric layer in AC-plasma display panel. The layers were heat treated at $580^{\circ}C$(baking temperature of dielectric layer) with and without pre-annealing at $300^{\circ}C$($Ni_{3}B$ formation temperature) for 30 minutes. In the layer with pre-annealing, amount of Cu diffusion was lower about 5 times than that in the layer without pre-annealing. The difference of Cu concentration could be attributed to Cu diffusion before $Ni_{3}B$ formation at grain boundaries. However, the diffusion behavior of the layer with pre-annealing was similar to that of the layer without pre-annealing after $Ni_{3}B$ formation. With increasing annealing time, Cu concentration of both layers increased due to grain growth.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.214.2-214.2
• /
• 2013

Device performance for the 45 and 32 nm node CMOS technology requires the integration of ultralow-k materials. To lower the dielectric constant for PECVD and spin-on materials, partial replacement of the solid network with air (k=1.01) appears to be more intuitive and direct option. This can be achieved introducting of second "labile" phase during depositoin that is removed during a subsequent UV curing and annealing step. Besides, with shrinking line dimensions the resistivity of barrier films cannot meet the International Technology Roadmap for Semiconductors (ITRS) requirements. To solve this issue self-forming diffusion barriers have drawn attention for great potential technique in meeting all ITRS requirments. In this present work, we report a Cu-V alloy as a materials for the self-forming barrier process. And we investigated diffusion barrier properties of self-formed layer on low-k dielectrics with or without UV curing treatment. Cu alloy films were directly deposited onto low-k dielectrics by co-sputtering, followed by annealing at various temperatures. X-ray diffraction revealed Cu (111), Cu (200) and Cu (220) peaks for both of Cu alloys. The self-formed layers were investigated by transmission electron microscopy. In order to compare barrier properties between V-based interlayer on low-k dielectric with UV curing and interlayer on low-k dielectric without UV curing, thermal stability was measured with various heat treatment temperature. X-ray photoelectron spectroscopy analysis showed that chemical compositions of self-formed layer. The compositions of the V based self-formed barriers after annealing were strongly dominated by the O concentration in the dielectric layers.

• 전기화학회지
• /
• 제10권2호
• /
• pp.94-103
• /
• 2007

반도체 소자의 고속화, 고집적화, 고신뢰성화에 대한 요구는 알루미늄 합금으로부터 구리로의 배선 물질의 변화를 유도하였다. 낮은 비저항과 높은 내열화성을 특징으로 하는 구리는 그 전기적, 재료적 특성이 알루미늄과 상이하여 배선 형성에 있어 새로운 주변 재료와 공법을 필요로 한다. 본 총설에서는 상감공정(damascene process)을 사용하는 다층 구리 배선 공정에 있어 핵심이 되는 구리 전해 도금(electrodeposition) 공정을 중심으로 확산 방지막(diffusion barrier) 및 도전층(seed layer), 바닥 차오름(bottom-up filling)을 위한 전해/무전해 도금용 유기 첨가제, 화학적 기계적 평탄화(chemical mechanical polishing) 및 표면 보호막(capping layer) 기술 등의 금속화 공정에 대한 개요와 개발 이슈를 소개하고 최근의 연구 결과를 통해 구리 배선 공정의 최신 연구 동향을 소개하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.27-27
• /
• 2004

• 한국진공학회지
• /
• 제18권3호
• /
• pp.203-207
• /
• 2009

반도체 공정에서 기존 금속배선으로 사용되던 Al을 대체하여 사용되는 금속배선으로는 Cu가 그 대안으로 인식되고 있다. 이는 비저항값이 Al ($2.66{\mu}{\Omega}$-cm)보다 Cu ($1.67{\mu}{\Omega}$-cm)가 더 작아 RC 지연 시간 (RC delay time)을 극복하기 때문이다. 그러나 Cu의 녹는점은 $1085^{\circ}C$로 높지만 저온에서 쉽게 Si기판과 반응하는 특성을 가지고 있고, 또한 Si과의 접착력이 좋이 않는 것으로 알려져 있다. 이러한 이유로 Cu와 Si과의 반응을 방지하고 접착력을 높이기 위하여 확산방지막의 연구가 꾸준히 진행되고 있다. 본 연구그룹에서는 Cu의 확산을 방지하기 위하여 W-C-N의 확산방지막에 대하여 연구하여 왔다. 지금까지 보고된 연구 결과에 의하면 W-C-N (tungsten-carbon-nitrogen) 확산방지막은 고온에서도 Cu와 Si과의 확산을 효과적으로 방지하는 것으로 보고되었다. 이 논문에서는 W-C-N 확산방지막에 질소(N) 비율을 다르게 증착하여 지금까지 진행한 연구 결과를 기반으로 새로이 Cu의 전자거동현상(Electromigration)에 대하여 연구하였고, 고온 열처리 과정에서 박막의 표면강도 (Surface hardness)를 Nano-Indenter system을 이용하여 연구하였다. 이러한 연구를 통하여 박막내 질소가 포함된 W-C-N 확산방지막이 Cu의 전자거동에 더 안정적이며, 고온 열처리 과정에서도 표면 강도가 더 안정한 연구 결과를 획득하였다.

• 한국표면공학회지
• /
• 제23권3호
• /
• pp.173-182
• /
• 1990

In order to prevent the thermal and enviromenatal degradation of contact materials a nickel layer was plated as an undercoat of gold plating on the surface phosphorous bronze. The thickness of nikel and gold coating and chemical resistance of the coatings were measured at various conditions. Variation of morphology and chemical composition was studied by SEM, EDS and ESCA, respectively. Nickel layer was found to act as a thermal diffusion barrier and to retard the diffusion of copper from substrate to gold coating in the temperature $200^{\circ}C$~$400^{\circ}C$. below $200^{\circ}C$gold coated contacts showed a stable and low contanct resistance, while above $200^{\circ}C$ rapid diffusion of copper formed copper oxide on the surface layer and raised the contact resistance. With the nickel thinkness of abount 5$\mu$m as an undercoat the gold thinkness of $0.5\mu$m, showed satistactory (less than 1 m$\Omega$) contact resistance below 20$0^{\circ}C$ and corresponding gold thinkness increased to 1.0 m at $300^{\circ}C$~$400^{\circ}C$.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.139-145
• /
• 2005

In the study, in order to deposit TaN thin film using diffusion barrier and bottom electrode we made the Plasma Assisted ALD equipment and confirmed the electrical characteristic of TaN thin films deposited PAALD method, PAALD equipment depositing TaN thin film using PEMAT(pentakis(ethylmethlyamlno) tantalum) Precursor and $NH_3$ reaction gas is aware that TaN thin film deposited of high density and amorphous phase with XRD measurement The degree of diffusion and react ion taking place in Cu/TaN(deposited using 150 W PAALD)/$SiO_2$/Si systems with increasing annealing temperature was estimated from MOS capacitor property and the $SiO_2(600\;\AA)$/Si system surface analysis by C-V measurement and secondary ion material spectrometer(SIMS) after Cu/TaN/$SiO_2(400\;\AA)$ system etching. TaN thin film deposited PAALD method diffusion barrier have a good diffusion barrier property up to $500^{\circ}C$.