• 공업화학
• /
• 제27권1호
• /
• pp.21-25
• /
• 2016

리드프레임에 구리합금소재를 사용할 경우 구리이외의 고농도의 철, 니켈, 아연 등이 포함되며 여기서 발생되는 에칭폐액은 지정폐기물로 지정되어 있다. 따라서 본 연구에서는 전기도금용 산화구리(II)를 제조하기 위해 고농도 중금속을 함유한 리드프레임 에칭폐액의 맞춤형 정제과정을 설계하였다. 리드프레임 에칭폐액의 경우 중금속 함유량이 높아 이온교환수지법 단독으로는 중금속을 제거하는데 한계가 있었다. 따라서 본 연구에서는 물에 대한 용해도차를 이용한 환원-산화법을 연계하여 염화구리(I)을 제조한 후 산화제인 과황산나트륨을 이용하여 염화구리(II)로 재회수하는 방법을 사용하였다. 최적 환원제로는 하이드라진을 선택하였고, 최적 첨가량은 구리 1.0 mol당 1.4 mol이다. 환원-산화법과 이온교환수지법을 연결하여 중금속을 제거할 경우 3회 반복 시 $Fe^{3+}$ (4.3 ppm), $Ni^{2+}$ (2.4 ppm), $Zn^{2+}$ (0.78 ppm)로 전기도금용 산화구리(II) 제조용 원료로 사용이 가능할 것으로 사료된다.

• 대한화학회지
• /
• 제37권7호
• /
• pp.672-676
• /
• 1993

DMF 용액 중에서 zinc(II) 이온과 copper(II) 이온의 bilirubin과의 착물형성 여부를 조사하고 Zn(II)-bilirubin(이하 Zn(II)-BR로 줄임) 착물의 전기화학적 성질을 여러가지 전기화학적인 방법으로 조사하였다. Zn(II)는 DMF 용액 중에서 bilirubin과 착물을 형성하였으나, Cu(II)는 bilirubin과 착물을 형성하지 않고 오히려 bilirubin의 산화를 촉진시켰다. Zn-BR 착물은 3단계의 환원과정을 거치며, 제1파와 제2파의 환원전류는 반응성 전류가 약간 포함된 환산전류이었으며, 제3파의 환원전류는 확산지배적인 전류이었다.

• 대한화학회지
• /
• 제52권2호
• /
• pp.155-163
• /
• 2008

유기-실리카 이용한 잔유 구리(II)의 양을 빠른 추출을 위한 간단하고 재현성을 가지는 방법과 불꽃원자 흡수분광법으로의 검출에 대해 연구하였다. 공통으로 존재하는 이온은 분리와 검출에 간섭받지 않았다. 예비농축인자는 100 ml시료 용량에 대해 100 (1 ml 추출용량) 이 였다.제안된 방법의 검출한계는 1.0 ng ml-1이다. 최적조건하에서 흡착제의 최고흡수용량은 5 mg 구리/g 흡착제 였다. 최적조건하에서 상대표준편차는 2.8% (n=10)을 얻었다. 다양한 양의 구리(II)이온은 스파이크한 자연수와 합성수를 시험 시료로 하여 정확도 등을 시험하였다.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.42-46
• /
• 2008

The papers in preserved books and archives experience aging which was affected by a variety of factors. Thus, the studies concerning impacts of those factors on paper aging are required. In this research, a simulation of a short-time accelerated paper aging was conducted in order to examine the effects of acid and metals (alum, copper (II) sulfate, copper (II) chloride, and iron (III) chloride) on the natural paper aging for a long time. As a result of experiments, it is found that both acid and metals have impacts on paper aging. Alum resulted in the significant decrease of pH, brightness, folding endurance, and viscosity of paper. Both copper (II) chloride and iron (III) chloride also resulted in the decrease of brightness, folding endurance, and viscosity of paper. In more detail, paper aging by iron (III) chloride showed much more significant than that by copper (II) chloride. The paper aging in case of copper (II) sulfate coexisting sulfate ion, where metal absorbed moisture was higher than in case of paper treated only by alum. This result indicated that metal catalyzes paper aging by acid. Based on these results, it was revealed that both alum and metal are the major factors in paper aging. In particular, paper aging was far more accelerated in case when acid and metals existed in paper at the same time.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1711-1716
• /
• 2008

The reaction of copper(II) chloride with phenyl-N-[(pyridine-2-yl)methylene]methaneamide (ppmma) leads to a new $\mu$ -chloro bridged dimeric [Cu(ppmma)$Cl_2$]$_2$ complex, whereas a reaction of copper(II) bromide with ppmma affords a monomeric Cu(ppmma)$Br_2$ complex. Both complexes have been characterized by X-ray crystallography and electronic absorption spectroscopy. The crystal structural analysis of [Cu(ppmma)$Cl_2$]$_2$ shows that the two Cu(II) atoms are bridged by two chloride ligands, forming a dimeric copper(II) complex and the copper ion has a distorted square-pyramidal geometry ($\tau$ = 0.2). The dimer units are held through a strong intermolecular $\pi-\pi$ interactions between the nearest benzyl rings. On the other hand, Cu(ppmma)Br2 displayed a distorted square planar geometry with two types of strong intermolecular π-π interaction. EPR spectrum of [Cu(ppmma)$Cl_2$]$_2$ in frozen glas s at 77 K revealed an equilibrium between the mononuclear and binuclear species. The magnetic susceptibilities data of [Cu(ppmma)$Cl_2$]$_2$ and Cu(ppmma)$Br_2$ follow the Curie-Weiss law. No significant intermolecular magnetic interactions were examined in both complexes, and magnetic exchange interactions are discussed on the basis of the structural features.

• Carbon letters
• /
• 제11권2호
• /
• pp.117-121
• /
• 2010

The composites of alginate, carbon nanotube, and iron(III) oxide were prepared for the removal of heavy metal in aqueous pollutant. Both alginate and carbon nanotube were used as an adsorbent material and iron oxide was introduced for the easy recovery after removal of heavy metal to eliminate the secondary pollution. The morphology of composites was investigated by FE-SEM showing the carbon nanotubes coated with alginate and the iron oxide dispersed in the alginate matrix. The ferromagnetic properties of composites were shown by including iron(III) oxide additive. The copper ion removal was investigated with ICP AES. The copper ion removal efficiency increased greatly over 60% by using alginate-carbon nanotube composites.

• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.489-492
• /
• 2007

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.403-416
• /
• 2016

The possibility of using carica papaya leaf powder for removal of copper from wastewater as a low cost adsorbent was explored. Different parameters that affect the adsorption process like initial concentration of metal ion, time of contact, adsorbent quantity and pH were evaluated and the outcome of the study was tested using adsorption isotherm models. A maximum of 90%-94.1% copper removal was possible from wastewater having low concentration of the metal using papaya leaf powder under optimum conditions by conducting experimental studies. The biosorption of copper ion was influenced by pH and outcome of experimental results indicate the optimum pH as 7.0 for maximum copper removal. Copper distribution between the solid and liquid phases in batch studies was described by isotherms like Langmuir adsorption and Freundlich models. The adsorption process was better represented by the Freundlich isotherm model. The maximum adsorption capacity of copper was measured to be 24.51 mg/g through the Langmuir model. Pseudo-second order rate equation was better suited for the adsorption process. A dynamic mode study was also conducted to analyse the ability of papaya leaf powder to remove copper (II) ions from aqueous solution and the breakthrough curve was described by an S profile. Present study revealed that papaya leaf powder can be used for the removal of copper from the wastewater and low cost water treatment techniques can be developed using this adsorbent.

• 대한화학회지
• /
• 제13권4호
• /
• pp.309-312
• /
• 1969

A series of metal ion-2, 5-diamine 1, 4-dihydroxybenzene polymers containing copper(II), nickel(II) or cobalt (II) have been prepared. The structure was postulated on the basis of elementary analysis of polymers. It was found that copper polymer is most likely the coordination polymers by X-ray powder pattern studies. The thermal stability of the polymers was also studied by a simple method, utilizing a thermogravimetric balance. The order of thermal stabilities is Cu(II) > Ni(II) > Co(II). The polymers start to decompose at a relatively low temperature.

• 환경위생공학
• /
• 제21권3호
• /
• pp.52-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene-1,4-divinylbenzene(DVB) with 1%, 2%, and 20%-crosslinking and macrocyclic ligand of cryptand 21 by copolymerization method and the adsorption characteristics of uranium(VI), copper(II) and dysprosium(III) metallic ions have been investigated in various experimental conditions. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, equilibrium time, dielectric constant of solvent and crosslink on adsorption of metallic ions were investigated. The metal ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium$(UO^{2+}_2)\;>\;copper(Cu^{2+})\;>\;dysprosium(Dy^{3+})$ ion. The adsorption was in order of 1%, 2%, and 20% crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.