• Macromolecular Research
• /
• 제16권3호
• /
• pp.231-237
• /
• 2008

Biodegradable poly($\varepsilon$-caprolactone-co-L-lactide)-b-poly(ethylene glycol) (PCLA-b-PEG) copolymers were synthesized via solution polymerization by varying the feed composition of $\varepsilon$-caprolactone ($\varepsilon$-CL) and L-lactide (LLA) ($\varepsilon$-CL: LLA= 10:0, 7:3, 5:5, 3:7, 0: 10). The feed ratio based on weight is in accordance with the copolymer composition except for the case of $\varepsilon$-CL: LLA=3:7 (C3L7), which was verified by $^1H$-NMR. Two different approaches were used for the exceptional case, which is an extension of the reaction time or the sequential introduction of the monomer. A copolymer composition of $\varepsilon$-CL: LLA=3:7 could be obtained in either case. The chemical microstructure of PCLA-b-PEG was determined using the $^{13}C$-NMR spectra and the effect of the sequential structure on the thermal properties and crystallinity were examined. Despite the same composition ratio of the copolymer, the microstructure can differ according to the reaction conditions.

• 대한화학회지
• /
• 제24권1호
• /
• pp.73-79
• /
• 1980

비닐요소(VU)와 초산비닐(VAc)를 라디칼혼성중합하고 VU-VAc혼성중합체를 methanolysis하여 요소기와 히드록시기를 가지는 수용성고분자인 VU-비닐알코올(VA)혼성중합체를 합성하였다. VU는 비닐중합성을 나타내며 이 결과는 Nozakura등의 보고와 일치한다. 수용액중에서 30몰%정도 이상 VU의 조성을 가지는 VU-VA혼성중합체의 Huggins정수는 대단히 큰 값으로 관측되었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1025-1030
• /
• 2004

A hybrid linear polymer-dendrimer block copolymer, poly(ethylene glycol)-block-poly(L-lysine) dendrimer, was synthesized and introduced to form polyionic complexes with DNA. The copolymer formed core-shell type nanoparticles with plasmid DNA. From dynamic light scattering experiments, the mean diameter of the polyplexes was observed to be 154.4 nm. The complex showed much increased water solubility compared to poly(L-lysine). The plasmid DNA in polyplexes was efficiently protected from the enzymatic digestion of DNase I. The cytotoxicity and transfection efficiency for 293 cells was measured in comparison with poly(Llysine).

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.36-42
• /
• 1999

The antimicrobial activities of the copolymer of N,N'-dimethyl- N,N'-diallyl ammonium chloride(DMDAAC) and diallyl amino(DA) were investigated. The copolymer of DMDAAC and DA was prepared by free radical Polymerization through an intra-intermolecular propagation mechanism ie, cyclopolymerization. The copolymer was, then, reacted with cyanuric chloride for reactivity with hydroxyl group of cellulose. Cotton fabrics were finished by synthesized polymer, and their antimicrobial activities and fastness to launderings were tested. Dichlorotriazinyl DMDAAC-DA copolymer has MIC value of 1ppm against S. aureus and 10ppm against K pneumoniae. The antimicrobial fastness of the finished cotton to launderings were good enough to show colony reduction above 70% against S. aureus and K pneumoniae after 50 repeated laundering in anionic commercial detergent. Optimum treatment concentrations of the polymer were 0.5% in cold pad-batch method, and 0.1% in pad-dry method.

• Journal of Photoscience
• /
• 제7권2호
• /
• pp.47-52
• /
• 2000

The copolymmers of N, N-dimethylaminoethyl methacrylate(DAEM) and N-arylmethacrylamide (AMA) were prepared, and their photochemical properties as a negative photoresist were studied by the measurements of insoluble fraction, and by UV and IR absorption spectral changes. These copolymers are soluble in DMF, actone, methanol, of acidic buffer solutions. Solubility of these copolymer films in the vuffer solutions increased with the amount of DAEM units in the copolymer and decreased with the pH value. The insoluble fraction of the copolymer films in the buffer solution of pH 4 of in methanol increased with irradiation time and the amount of AMA units in the copolymer. UV and IR spectral changes indicated that not only photo-crosslinking but also the photo-Fries rearrangement took place upon irradiation with a 254nm UV light.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.276-276
• /
• 2013

Time-Of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) and Atomic Force Microscopy (AFM) are the useful instruments to measure nanostructures of material surfaces. Surface pattern formation in blending homopolymer and diblock copolymer films was investigated as a function of film thickness and annealing conditions. In this study, surface structures of blending homopolymer [deuterated polystyrene (Mn 20,000), poly (methyl methacrylate) (Mn 18,000)] and diblock copolymer [Poly (deuteratedstyrene(d8)-b-methyl methacrylate) (Mn 19,500-18,100)] films were observed. The AFM result indicated that the nanostructures and film thickness depended on temperature, concentration and solvent. TOF-SIMS depth profiling was obtained for the lamellar morphology of symmetric dPS-b-PMMA which is found to orient parallel to the surface of the substrate. Elemental and molecular depth profiles measured in the negative ion mode by a Cs+ primary ion beam demonstrate variations in hydrogen, deuterium, carbon, oxygen, hydrocarbons and deuterated hydrocarbons within the diblock copolymer according to the depth.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.6.2-6.2
• /
• 2011

Block copolymer (BCP) self-assembly in a film geometry has recently been the focus of increased research interest due to their potential use as templates and scaffolds for the fabrication of nanostructured materials. The phase behavior in a thin film geometry that confines polymer chains to the interfaces will be influenced by the interfacial interactions at substrate/polymer and polymer/air and the commensurability between the equilibrium period (L0) of the BCP and the total film thickness. We investigated the phase transitions for the films of block copolymers (BCPs) on the modified surface, like the order-to-disorder transition (ODT) by in-situ grazing incidence small angle x-ray scattering (GISAXS) and transmission electron microscopy (TEM). The selective interactions on the surface by a PS-grafted substrate provide the preferential interactions with the PS component of the block, while a random copolymer (PS-r-PMMA) grafted substrate do the balanced interfacial interactions on the surface. The thickness dependence of order-to-disorder behavior for BCP films will be discussed in terms of the surface interactions.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.84-91
• /
• 2001

Both A-B-A triblock and multiblock copoly(ester-ether)s consisting of poly(L-Lactide) and poly(oxyethylene-co-oxypropylene) were prepared and characterized. The preparation of the triblock copolymer was done by ring-opening copolymerization of L-lactide with a commercially available telechelic copolyether, Pluronic$\^$TM/(PN) by catalysis of stannous octanoate. The molecular weight and unit composition of the produced copolymers were successfully controlled by changing the L-lactide/PN ratio in feed. However, a high molecular weight copolymer incorporating PN in large amount was not obtained because the molecular weight of the resulting copolymer was limited at a high L-lactide/PN composition. The multiblock copolymer was synthesized by the copolycondensation of oligo(L-lactic acid) prepared by thermal dehydration of L-lactic acid, PN, and dodecanedioic acid as carboxyl/hydroxyl adjusting agent. This polycondensation proceeded by catalysis of stannous oxide to give multiblock copolymers with high molecular weight and wide range of compositions.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.587-594
• /
• 2007

Well defined amphiphilic diblock copolymers of poly(styrene-b-vinylbenzylphosphonic acid) (PS-b-PVBPA) were prepared by controlled radical polymerization technique, two-step hydrolysis reactions using trime-thylsilyl bromide from the corresponding phosphonic ethyl ester. By indirect, backward pH titration of the block copolymer, a good titration curve of a dibasic acid was observed. The IEC values obtained from both backward pH titration and volumetric back titration were almost identical. Thermal gravimetric analysis (TGA) of the phosphonic acid containing block copolymer showed a high thermal stability up to $400^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1060-1061
• /
• 2003

We report photo- (PL), and electroluminescence (EL) realized via intrachain and interchain energy transfer in poly[9,9-(2'-octyl)fluorene-2,7-vinylene]-co-poly[2-methoxy,5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene] (PFV-co-MEH-PPV) copolymer systems. Energy transfer begins even at the device using 5 % MEH-PPV copolymer, and shows the best device performance for the 10 % MEH-PPV copolymer.