• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.426-435
• /
• 2013

The diversity-multiplexing tradeoff (DMT) functions of three special half-duplex (HD) dynamic decode-and-forward (DDF) protocols with multiple antennas only at the source node, only at the destination node, and only at the relay node are analytically derived. The DMT functions of these three relay protocols are compared with one another and with those of the nonorthogonal amplify and forward (NAF) protocols.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.213-220
• /
• 2008

This paper analyzes a broadcasting technique for wireless multi-hop sensor networks that uses a form of cooperative diversity called opportunistic large arrays (OLAs). We propose a method for autonomous scheduling of the nodes, which limits the nodes that relay and saves as much as 32% of the transmit energy compared to other broadcast approaches, without requiring global positioning system (GPS), individual node addressing, or inter-node interaction. This energy-saving is a result of cross-layer interaction, in the sense that the medium access control (MAC) and routing functions are partially executed in the physical (PHY) layer. Our proposed method is called OLA with a transmission threshold (OLA-T), where a node compares its received power to a threshold to decide if it should forward. We also investigate OLA with variable threshold (OLA-VT), which optimizes the thresholds as a function of level. OLA-T and OLA-VT are compared with OLA broadcasting without a transmission threshold, each in their minimum energy configuration, using an analytical method under the orthogonal and continuum assumptions. The trade-off between the number of OLA levels (or hops) required to achieve successful network broadcast and transmission energy saved is investigated. The results based on the analytical assumptions are confirmed with Monte Carlo simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.431-439
• /
• 2010

In this paper, multiple-relay cooperative communication network with multiple antennas is considered. Applying the soft-decision-and-forward protocol to this system, pairwise error probability(PEP) is derived and then symbol error rate(SER) is also calculated. However, in general, signals are transmitted through the orthogonal channel in the multiple-relay cooperative communication network for the prevention of interference, which is inefficient in terms of the throughput. For the improvement of throughput, the relay selection is considered, where the relay having the maximum instantaneous end-to-end signal-to-noise ratio is chosen. Performance of the system is analyzed in terms of PEP and SER. As the number of the relay increases, relay selection method outperforms the conventional multiple-relay transmission system where all relays participate in the second time slot.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.56-60
• /
• 2010

This paper proposes a new cooperative protocol in which Alamouti's scheme is applied to exploit the advantages of both coded cooperation and Alamouti's scheme. It not only has better than direct transmission but also coded cooperation at appropriate cooperation levels. Simulation results show that the proposed protocol can save approximately 6~7 dB of transmit power to achieve the target BER(Bit Error Rate) compared with coded cooperation. Furthermore, the performance of the proposed protocol does not significantly depend on the qualities of inter-user channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.4
• /
• pp.31-37
• /
• 2008

Conventional cooperative communications can attain gain of spatial diversity and path loss reduction because destination node independently received same signal from source node and relay node located between source node and destination node. However, these techniques bring about decreased spectral efficiency with relay node and increased complexity of receiver by using maximal ratio combining (MRC). This paper has proposed cooperative ARQ protocol that can improve the above problems and can get the better performance. This method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. In addition, if ARQ message indicates NACK relay node operates selective retransmission and we can increase reliability of system compared with that of general ARQ protocol in which source node retransmits data. In the proposed protocol, the selective retransmission and ARQ message are to be determined by comparing log-likelihood ratio (LLR) computation of received signal from source node with predetermined threshold values. Therefore, this protocol don't waste redundant bandwidth with CRC code and can reduce complexity of receiver without MRC. We verified spectral efficiency and BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.157-162
• /
• 2010

In this paper, We propose that the adaptive cooperative relay transmission technique using closed-loop MIMO scheme for duplex communication system. As the mobility between relay and base station is little, closed-loop MIMO is better diversity gain than open-loop MIMO. At this time, more than one relaying terminals are included in one cooperative group to share their transmission and take precoding weight feedback. For minimization of throughput reduction caused by increasing feedback bits, we use codebook-based MRT that limit the number of feedback bits. Among the cooperative relay group, the best relays are selected from the base stataion and get the feedback. A protocol senarios are also proposed for this relay system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.24-29
• /
• 2010

Selection-type relaying protocol, which is one of cooperative relaying protocols, provides low decoding complexity and improved system performance due to selection diversity. In this paper, we deal with linear precoding technique that minimize the error probability of cooperative MIMO system. Under the assumption that full channel state information is available at whole nodes, linear source and relay precoders, which minimize mean squared error of the estimated symbol vector, are proposed. Moreover, unlikely to the conventional selection-type relaying protocol using a fixed threshold signal-to-noise-ratio, new transmission link selection algorithm selects direct link or relay link as a transmission link, is introduced. Simulation results show that the proposed linear precoder with the transmission link selection algorithm outperforms the conventional precoders for two-hop relaying protocols or selection-type relaying protocols.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1026-1040
• /
• 2012

For a single relay channel, we compare the capacity of two different amplify-and-forward (AF) protocols, which are orthogonal AF (OAF) and non-orthogonal AF (NAF). The NAF protocol has been proposed to overcome a significant loss of performance of OAF in the high spectral efficiency region, and it was also theoretically proved that NAF performs better than OAF in terms of the diversity-multiplexing tradeoff. However, existing results have been evaluated at the asymptotically high signal to noise ratio (SNR), thus the power allocation problem between the source and the relay was neglected. We examine which protocol has better performance in a practical system operating at a finite SNR. We also study where a relay should be located if we consider the power allocation problem. A notable conclusion is that the capacity performance depends on both SNR and power allocation ratio, which indicates OAF may perform better than NAF in a certain environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.73-81
• /
• 2009

Wireless media communication has lower robustness and stability than wired communication because of narrow bandwidth and unstable channel state. To make up for the deficient points of wireless communication, we used the diversity effect of cooperation communication and the error correction effect of channel coding schemes. In this paper, the cooperative communication system with RCPC codes and Hybrid ARQ transmission scheme is proposed for improving reliability on wireless communication, and we executed these simulations. From the simulation results, proposed system is showed lower BER performance than legacy system. In addition, we confirm the fact that the channel state of Relay-node and source-node is more important than the channel state of Relay-node and destination-node.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.7-12
• /
• 2014

The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.