• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1036-1047
• /
• 2003

This study was carried out in the purpose of proposing internet marketing strategy which can make conversion rate higher through analysis of internet shopping behavior types. This study was executed in two stages; qualitative study, quantitative study. In the qualitative study, internet shopping behavior types were investigated through the In-depth interview and direct observation, and then in the quantitative study, differences of internet shopping behavior types according to consumer characteristics, product properties and shopping-mall types were examined. For qualitative study, 30 samples by focus sampling were inquired and for quantitative study, 334 data were collected through web survey. The results of this study are as follows: First, 7 Internet shopping behavior types of apparel were found through the qualitative study: cautious purchase by price comparison, searching purchase, special low price purchase, impulse purchase, prepurchase deliberation, information accumulation, recreation-oriented. Second, in relation to consumer characteristics, consumers that have many internet purchase experiences showed goal-directed behavior more and female did more special low price purchase behavior and impulse purchase behavior than male. Third, according to product properties, high price product led more cautious purchase by price comparison & prepurchase deliberation behavior and fashionable product led more information-searching behavior. In the case of low price and fashionable products, impulse purchase behaviors were showed more. Forth, according to Internet shopping mall types, category killer shopping mall visitors showed information search behavior, recreation-oriented behavior more.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1645-1647
• /
• 1996

Polycrystalline CdTe thin films -have been studied for photovoltaic application because of their high absorption coefficient and optimal band gap energy (1.54 eV) for solar energy conversion. In this study, we prepared CdTe films using RF-magnetron sputtering method and investigated structural, optical and electrical properties with spectrophotometer, XRD, EDX, and resistivity meter. CdTe films at $200\;^{\circ}C$ showed a mixture of zinc blend (Cubic) and wurtzite (hexagonal) phase. On the other hand, the films at $400\;^{\circ}C$ showed highly oriented structure having hexagonal structure. The resistivity of CdTe films deposited on $SiO_2$ substrates was about $10_7\;{\Omega}cm$. The value of resistivity decreased with the increase of the substrate temperature. CdTe were sputtered on CdS thin films prepared by chemical bath deposition for the formation of the heterojunction. I-V characteristics of these cells were measured at a light density of $100mw/cm^2$, AM. 1.0. The present thin film solar cells showed a conversion efficiency of about 5%.

• 한국멀티미디어학회논문지
• /
• 제6권5호
• /
• pp.805-815
• /
• 2003

본 논문은 문서 분할, 웨이블릿 리프팅, 그리고 비트 평면 부호화에 기반한 문서 압축과 복원 시스템을 제시한다. 압축 과정에서 문자들의 모양을 유지하기 위하여 문서 분할을 사용한다. 웨이블릿 변환 방법으로는 웨이블릿 리프팅을 사용하며 웨이블릿 계수 값에 대하여 비트 평면을 구성하여 중요 서브블럭 단위로 압축을 수행한다. 중요 서브블록 부호화를 통하여 압축율을 높임과 동시에 압축속도 향상도 이룩하였다. 양자화로는 서브밴드 단위의 비 트 쉬프트 방법을 사용하였다. 웨이블릿 리프팅의 전단계로 색차변환, 부표본화를 수행하였으며, 서브블록 부호화의 전단계로 그레이코드 변환을 수행하였다. 여러 영상과 문서를 대 상으로 실험하여 시스템의 성능을 확인하였다.

• 공업화학
• /
• 제30권4호
• /
• pp.504-508
• /
• 2019

GaInP/AlGaInP 이종접합 구조를 제안하고 집광 조건에서 가장 높은 효율을 달성한 III-V 화합물 반도체 다중접합 태양전지의 맨 위 subcell에 주로 사용되는 GaInP 동종접합 구조를 대체해 이종접합 구조가 응용될 가능성에 대하여 조사하였다. $2^{\circ}$ off 된 웨이퍼와 $10^{\circ}$ off 된 서로 다른 off-cut 방향을 갖는 두 종류의 GaAs 기판 위에 성장된 태양전지의 특성을 집광 조건에서 측정하고 비교하였다. $10^{\circ}$ off 된 태양전지에서 더 높은 단락전류와 변환효율을 얻었다. 1 sun 조건에서 $10^{\circ}$ off 된 기판 위에 제작된 $2{\times}2mm^2$ 면적의 태양전지에서 $9.21mA/cm^2$의 단락전류밀도와 1.38 V의 개방 전압이 측정되었다. $10^{\circ}$ off 기판 위에 제작된 $5{\times}5mm^2$ 태양전지에서 집광도 증가에 따라 곡선인자(fiill factor)가 감소하여 변환효율은 6.03% (1 sun)에서 5.28% (20 sun)로 측정되었다.

• 문화기술의 융합
• /
• 제8권6호
• /
• pp.9-22
• /
• 2022

본 연구는 교과별교수법 수업에 협동학습을 적용하여 예비유아교사의 의사소통능력 및 문제해결능력의 효과를 검증함으로써 협동학습중심의 교수학습법에 기초한 예비교사교육의 기초자료를 제공하는 데 그 목적이 있었다. 2021년 1학기에 C대학교 유아교육과에서 개설한 교과별교수법 수업을 수강한 4학년 학생을 대상으로 2021년 3월 1주부터 5월 2주까지 주 4시간씩 총 11주간 협동학습중심의 수업이 이루어졌다. 연구결과, 첫째, 협동학습중심의 교과별교수법 수업은 예비교사의 의사소통능력을 향상하는데 효과가 있었으며, 하위영역 중에서 목표설정능력과 메시지전환능력에 효과가 있는 것으로 나타났다. 둘째, 협동학습중심의 교과별교수법 수업은 예비교사의 문제해결능력을 향상하는데 효과가 있었으며, 문제해결능력의 모든 하위영역에 효과가 있는 것으로 나타났다. 따라서 예비교사양성과정에서 협동학습중심의 수업경험은 교사가 되었을 때에도 의사소통능력과 문제해결능력을 유아교육현장에서 유아들에게 다양하게 활용할 수 있는 실제적 능력을 함양하게 되므로 교사교육과정에서 협동학습중심의 교수법 접근의 기회를 제공할 필요가 있다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.248-252
• /
• 2005

This paper deals with a new design method for a small-size rotating machine with high power. In order to achieve high performance, secondary excitation by Nd-Fe-B magnets and the grain oriented electrical steel sheets were selected and a new design using dual rotors is proposed. The outline of the high-performance rotating machine will be presented and the results of the finite element analysis by using this method combined with the E&SS modeling will be shown in the paper.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.322-329
• /
• 2006

In the last decade, the increasing restrictions imposed on the exhaust emissions from internal combustion engines and traffic limitations have increased the development of electrical propulsion systems for automotive applications. The goal of electrical and hybrid vehicles is the reduction of global emissions, which in turn leads to a decrease in fuel resource exploitation. This paper presents a novel approach for control of Induction Motors (IM) using the Particle Swarm Optimization (PSO) algorithm to optimize the parameters of the Proportional Integral Controller (PI-Controller). The overall system is simulated under various operating conditions. The use of PSO as an optimization algorithm makes the drive robust and insensitive to load variation with faster dynamic response and higher accuracy. The system is tested under variable operating conditions. The simulation results show a positive dynamic response with fast recovery time.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.81-86
• /
• 2003

As the utility value of GPS in surveying field is on the increase after the conversion into the world geodetic system, it is attracting the interest of many people involved in the application of GPS. In this study an algorithm was established settling ambiguity through LAMBDA techniques and the baseline processing program was developed for L1/L2 carrier phase using visual c++ 6.0, which is an object-oriented language. And the developed program proved that it maintained a difference of less than 3mm over the short baseline of 1.5m or shorter when compared with other commercialized programs.

• 대한전자공학회논문지
• /
• 제27권6호
• /
• pp.963-971
• /
• 1990

This paper proposes a memory intensive VLSI architecture for the realization of real-time 3x3 neighborhood processor based on the distributed arithmetic. The proposed architecture is characterized by a bit serial and multi-kernel parallel processing which exploits the pixel kernel parallelism and concurrency. The chip implements 8 neighborhood processing elements in parallel with efficirnt input and output modules which operate concurrently. Besides the a4chitectural design of a neighborhood processor, the design methodology using module generator concept has been considered and MOGOT(MOdule Generator Oriented VLSI design Tool) has been constructed based on the workstation. Based on these design environments MOGOT, it has been shown that the main part of the suggested architecture can be designed efficiently using 2\ulcorner double metal CMOS technology. It includes design of input delay and data conversion module, look-up table for inner product operation, carry save accumulator, output data converter and delay module, and control module.

• 통상정보연구
• /
• 제10권3호
• /
• pp.101-116
• /
• 2008

Future e-Trade RFID/USN distribution should satisfy the new needs of reasonable customers such as efficient supply of goods, presentation of information, and communication by developing intermediate and long-term strategies through analysis of industrial conditions and customers' needs. Through preferential application of new technology, knowledge-based e-Trade RFID/USN distribution environment and DB of industrial portal sites should be developed, RFID/USN infra such as Supply Chain Management(SCM) should be expanded, future-oriented knowledge-based services should be developed to prepare specific and realistic plans for proper UT(Ubiquitous Technology). Such change in e-Trade distribution environment should have historical and environmental backgrounds to suggest specific tasks and directions as a conversion of structural concept of engineering and trade theory for new u-Trade. Accordingly, this study is to present all the problems available in RFID/USN distribution, develop an organized and technological estimate model and provide a foundation to apply it efficiently. This study aims to present an interpretational foundation of RFID/USN distribution, rather than technical directions.