• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.919-928
• /
• 2023

Rainfall characteristics in Korea are concentrated during the summer flood season. In particular, when a large amount of turbid water flows into the dam due to the increasing trend of concentrated rainfall due to abnormal rainfall and abnormal weather conditions, prolonged turbid water phenomenon occurs due to the overturning phenomenon. Much research is being conducted on turbid water prediction to solve these problems. To predict turbid water, turbid water data from the upstream inflow is required, but spatial and temporal data resolution is currently insufficient. To improve temporal resolution, the development of the Turbidity-SS conversion equation is necessary, and to improve spatial resolution, multi-item water quality measurement instrument (YSI), Laser In-Situ Scattering and Transmissometry (LISST), and hyperspectral sensors are needed. Sensor-based measurement can improve the spatial resolution of turbid water by measuring line and surface unit data. In addition, in the case of LISST-200X, it is possible to collect data on particle size, etc., so it can be used in the Turbidity-SS conversion equation for fraction (Clay: Silt: Sand). In addition, among recent remote sensing methods, the spatial distribution of turbid water can be presented when using UAVs with higher spatial and temporal resolutions than other payloads and hyperspectral sensors with high spectral and radiometric resolutions. Therefore, in this study, the Turbidity-SS conversion equation was calculated according to the fraction through laboratory analysis using LISST-200X and YSI-EXO, and sensor-based field measurements including UAV (Matrice 600) and hyperspectral sensor (microHSI 410 SHARK) were used. Through this, the spatial distribution of turbidity and suspended sediment concentration, and the turbidity calculated using the Turbidity-SS conversion equation based on the measured suspended sediment concentration, was presented. Through this, we attempted to review the applicability of the Turbidity-SS conversion equation and understand the current status of turbid water occurrence.

• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.60.5-60
• /
• 2001

It is very difficult to design and analyze the relay circuit because one have to consider and analyze in order the behavior in which the relay contacts. In this paper, we propose the relay circuit to EMPG (Extended Mark Flow Graph) convension with a box´s characteristic equation. It will give you a lot of benefits in case of analysis and check of the relay circuit to convert the relay circuit into EMPG.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.33-42
• /
• 1999

Geometrically standardized dental radiographs were taken. We prepared Digital Cu-Equivalent Image Analyzing System for quantitative assessment of mandible bone. Images of radiographs were digitized by means of Quick scanner and personal Mcquintosh computer. NIH image as software was used for analyzing images. A stepwedge composed of 10 steps of 0.1mm copper foil in thickness was used for reference material. This study evaluated the effects of step numbers of copper wedge adopted for calculating equation. kVp and exposure time on the coefficient of determination(r²)of the equation for conversion to Cu-equivalent image and the coefficient of variation and Cu-Eq value(mm) measured at each copper step and alveolar bone of the mandible. The results were as follows: 1. The coefficients of determination(r²) of 10 conversion equations ranged from 0.9996 to 0.9973(mean=0.9988) under 70kVp and 0.16 sec. exposure. The equation showed the highest r was Y=4.75614612-0.06300524x +0.00032367x² -0.00000060x³. 2. The value of r² became lower when the equation was calculated from the copper stepwedge including 1.0mm step. In case of including 0mm step for calculation. the value of r showed variability. 3. The coefficient of variation showed 0.11, 0.20 respectively at each copper step of 0.2, 0.1mm in thickness. Those of the other steps to 0.9 mm ranged from 0.06 to 0.09 in mean value. 4. The mean Cu-Eq value of alveolar bone was 0.14±0.02mm under optimal exposure. The values were lower than the mean under the exposures over 0.20sec. in 60kVp and over 0.16sec. in 70kVp. 5. Under the exposure condition of 60kVp 0.16sec.. the coefficient of variation showed 0.03. 0.05 respectively at each copper-step of 0.3, 0.2mm in thickness. The value of r² showed over 0.9991 from both 9 and 10 steps of copper. The Cu-Eq value and the coefficient of variation was 0.14±0.01mm and 0.07 at alveolar bone respectively. In summary. A clinical application of this system seemed to be useful for assessment of quantitative assessment of alveolar provided high coefficient of determination is obtained by the modified adoption of copper step numbers and the low coefficient of variation for the range of Cu-Equivalent value of alveolar bone from optimal kVp and exposure time for each x-ray machine.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.198-202
• /
• 1997

The oxidation behavior of UO$_2$pellets was studied using a thermogravimetric analyzer and an XRD in the temperature range of 300 to 550$^{\circ}C$ in air. From XRD studies it is found that UO$_2$is converted to U$_3$O$\_$8/ and the weight gains of UO$_2$specimen are characterized by S-shape curves. After complete oxidation the specimens broke into fine powder and the average weight gain was about 3.93 wt%. The activation energy of 50% conversion of UO$_2$to U$_3$O$\_$8/ is 81.6 kJ/mol and the oxidation rate per unit time was found to be as follows dw/dt=6.54${\times}$10$\^$6/ e (equation omitted), wt%/h : at 50% conversion of UO$_2$into U$_3$O$\_$8/ where w, t and T were wt% gain, conversion time and temperature, respectively.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.374-383
• /
• 2001

This paper presents the torque estimation scheme by Energy Conversion Method (ECM) that can be applied to the torque control of switched reluctance motor. There are two types of torque estimation method by ECM. One is the method using mechanical output energy and another is that using co-energy. When the torque is estimated by ECM, the estimated flux linkage can be obtained by voltage equation and Luenberger observer. By comparing the torque estimated by ECM with that be FEM, we verify the feasibility of the proposed torque estimation by ECM.

• Carbon letters
• /
• v.9 no.2
• /
• pp.121-126
• /
• 2008

High modulus pitch based carbon fibers (HM) were exposed to isothermal oxidation using tube furnace in carbon dioxide gas to study the oxidation kinetics under the temperature of $800-1100^{\circ}C$. The kinetic equation $f=1-{\exp}(-at^b)$ was introduced and the constant b was obtained in the range of 1.02~1.42. The oxidation kinetics were evaluated by the reaction-controlling regime (RCR) depending upon the apparent activation energies with the conversion increasing from 0.2 to 0.8. The activation energies decrease from 24.7 to 21.0 kcal/mole with the conversion increasing from 0.2 to 0.8, respectively. According to the RCR, the reaction was limited by more diffusion controlling regime for the HM fibers with the conversion increasing. Therefore, it seems that the oxidation which is under the diffusion controlling regime takes place continuously from the skin to the core of the fiber.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.993-999
• /
• 2011

The photoreactive prepolymers with multifunctional cinnamate and bisphenol Atype cinnamate groups that could perform photodimerization without photoinitiators were synthesized by the reaction of t-cinnamic acids (CAs) and epoxy resins. Their photocure reaction rates and the extent of reaction conversion were measured with Fourier transform infrared spectroscopy, and these increased with the intensity of UVirradiation. The experimental data of these reaction rates showed the characteristics of nth-order kinetics reaction, and all kinetic constants of each photoreactive polymer with this equation were summarized. Although the GTR-1800-HCA and KWG1-EP-HCA with hydroxyl group substituted cinnamate showed lower reaction conversion rates and rate constant than GTR-1800-CA and KWG1-EP-CAwith an unsubstituted cinnamate group, GTR-1800-MCAand KWG1-EP-MCAwith methoxy group substituted cinnamate showed similar and higher reaction conversion rates than the former, respectively. These results were explained in terms of segmental mobility for photopolymerization by molecular interactions.

• The KIPS Transactions:PartD
• /
• v.17D no.5
• /
• pp.327-336
• /
• 2010

This paper proposed software equation that is relation with effort and duration based on function point (FP) software size. Existent software equation based on lines of code (LOC). LOC sees big difference according to development language and there are a lot of difficulties in software size estimation. First, considered method that change LOC to FP. But, this method is not decided definitely conversion ratio between LOC and FP by development language. Also, failed though the conversion ratio motives software formula because was not presented about specification development language. Therefore, we derived software formula directly to large project data that was developed by FP. Firstly, datas that reasonable development period is set among development projects. Secondly, FP through regression analysis about this data and effort, motived relation with FP and duration. Finally, software equation was derived from these relation. Proposed model solves application problems that LOC-based model has and has advantage that application is possible easily in business.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.517-520
• /
• 2000

This paper presents models considering the magnetic nonlinear characteristics of 8/6 Switched Reluctance Motor. A $\lambda$-i equation with Fourier series parameters is shown to represent the relating to flux-linkage and current appropriately at any rotor position. And the energy conversion loop is described.