• 한국수자원학회논문집
• /
• 제56권12호
• /
• pp.919-928
• /
• 2023

우리나라의 강우 특성은 여름철 홍수기에 집중되어있다. 특히 이상강우 및 기상이변에 의한 집중강우의 증가 추세로 다량의 탁수가 댐 내에 유입될 시 전도현상으로 인해 탁수 장기화 현상이 발생하게 된다. 이러한 문제를 해결하기 위한 탁수 예측을 통한 선제적 조치 방안 또는 댐 운영방안 마련에 많은 연구가 진행되고 있다. 탁수 예측을 위해서는 상류 유입부의 탁수 자료를 필요로 하지만 현재 시·공간적인 데이터 해상도는 부족한 실정이다. 시간적 해상도 개선을 위해서는 탁도-SS 관계식에 대한 개발을 필요로 하며 공간적 해상도 개선을 위해 다항목수질측정기(YSI), 레이저부유사측정기(Laser In-Situ Scattering and Transmissometry, LISST), 초분광 센서 등의 센서 기반 측정을 통해 선, 면 단위 데이터 측정을 통해 탁수에 대한 공간적 해상도를 개선할 수 있다. 또한 LISST-200X의 경우 입경 크기 등에 대한 자료 수집이 가능함에 따라 분율(Clay : Silt : Sand)에 대한 탁도-SS 관계식에 활용될 수 있다. 또한 최근 원격탐사 방안 중 다른 탑재체에 비해 공간해상도 및 시간해상도가 높은 UAV와 분광·방사 해상도가 높은 초분광 센서를 활용 시 탁수 발생에 대한 공간적인 분포를 제시할 수 있다. 따라서, 본 연구에서는 LISST-200X 및 YSI-EXO를 활용하여 실험실 분석을 통해 분율(Clay : Silt : Sand)에 따라 탁도-SS 관계식을 산정하였으며 UAV (Matrice 600), 초분광센서(microHSI 410 SHARK)를 포함한 센서 기반 현장 측정을 통해 탁도와 부유사 농도, 측정된 부유사농도 기반 탁도-SS 관계식을 이용하여 산정한 탁도에 대하여 공간적 분포를 제시하였다. 이를 통해 탁도-SS 관계식에 대한 적용성 검토 및 탁수 발생 현황에 대하여 파악하고자 하였다.

• 한국물환경학회지
• /
• 제30권3호
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.60.5-60
• /
• 2001

It is very difficult to design and analyze the relay circuit because one have to consider and analyze in order the behavior in which the relay contacts. In this paper, we propose the relay circuit to EMPG (Extended Mark Flow Graph) convension with a box´s characteristic equation. It will give you a lot of benefits in case of analysis and check of the relay circuit to convert the relay circuit into EMPG.

• 치과방사선
• /
• 제29권1호
• /
• pp.33-42
• /
• 1999

Geometrically standardized dental radiographs were taken. We prepared Digital Cu-Equivalent Image Analyzing System for quantitative assessment of mandible bone. Images of radiographs were digitized by means of Quick scanner and personal Mcquintosh computer. NIH image as software was used for analyzing images. A stepwedge composed of 10 steps of 0.1mm copper foil in thickness was used for reference material. This study evaluated the effects of step numbers of copper wedge adopted for calculating equation. kVp and exposure time on the coefficient of determination(r²)of the equation for conversion to Cu-equivalent image and the coefficient of variation and Cu-Eq value(mm) measured at each copper step and alveolar bone of the mandible. The results were as follows: 1. The coefficients of determination(r²) of 10 conversion equations ranged from 0.9996 to 0.9973(mean=0.9988) under 70kVp and 0.16 sec. exposure. The equation showed the highest r was Y=4.75614612-0.06300524x +0.00032367x² -0.00000060x³. 2. The value of r² became lower when the equation was calculated from the copper stepwedge including 1.0mm step. In case of including 0mm step for calculation. the value of r showed variability. 3. The coefficient of variation showed 0.11, 0.20 respectively at each copper step of 0.2, 0.1mm in thickness. Those of the other steps to 0.9 mm ranged from 0.06 to 0.09 in mean value. 4. The mean Cu-Eq value of alveolar bone was 0.14±0.02mm under optimal exposure. The values were lower than the mean under the exposures over 0.20sec. in 60kVp and over 0.16sec. in 70kVp. 5. Under the exposure condition of 60kVp 0.16sec.. the coefficient of variation showed 0.03. 0.05 respectively at each copper-step of 0.3, 0.2mm in thickness. The value of r² showed over 0.9991 from both 9 and 10 steps of copper. The Cu-Eq value and the coefficient of variation was 0.14±0.01mm and 0.07 at alveolar bone respectively. In summary. A clinical application of this system seemed to be useful for assessment of quantitative assessment of alveolar provided high coefficient of determination is obtained by the modified adoption of copper step numbers and the low coefficient of variation for the range of Cu-Equivalent value of alveolar bone from optimal kVp and exposure time for each x-ray machine.

• 에너지공학
• /
• 제6권2호
• /
• pp.198-202
• /
• 1997

The oxidation behavior of UO$_2$pellets was studied using a thermogravimetric analyzer and an XRD in the temperature range of 300 to 550$^{\circ}C$ in air. From XRD studies it is found that UO$_2$is converted to U$_3$O$\_$8/ and the weight gains of UO$_2$specimen are characterized by S-shape curves. After complete oxidation the specimens broke into fine powder and the average weight gain was about 3.93 wt%. The activation energy of 50% conversion of UO$_2$to U$_3$O$\_$8/ is 81.6 kJ/mol and the oxidation rate per unit time was found to be as follows dw/dt=6.54${\times}$10$\^$6/ e (equation omitted), wt%/h : at 50% conversion of UO$_2$into U$_3$O$\_$8/ where w, t and T were wt% gain, conversion time and temperature, respectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권8호
• /
• pp.374-383
• /
• 2001

This paper presents the torque estimation scheme by Energy Conversion Method (ECM) that can be applied to the torque control of switched reluctance motor. There are two types of torque estimation method by ECM. One is the method using mechanical output energy and another is that using co-energy. When the torque is estimated by ECM, the estimated flux linkage can be obtained by voltage equation and Luenberger observer. By comparing the torque estimated by ECM with that be FEM, we verify the feasibility of the proposed torque estimation by ECM.

• Carbon letters
• /
• 제9권2호
• /
• pp.121-126
• /
• 2008

High modulus pitch based carbon fibers (HM) were exposed to isothermal oxidation using tube furnace in carbon dioxide gas to study the oxidation kinetics under the temperature of $800-1100^{\circ}C$. The kinetic equation $f=1-{\exp}(-at^b)$ was introduced and the constant b was obtained in the range of 1.02~1.42. The oxidation kinetics were evaluated by the reaction-controlling regime (RCR) depending upon the apparent activation energies with the conversion increasing from 0.2 to 0.8. The activation energies decrease from 24.7 to 21.0 kcal/mole with the conversion increasing from 0.2 to 0.8, respectively. According to the RCR, the reaction was limited by more diffusion controlling regime for the HM fibers with the conversion increasing. Therefore, it seems that the oxidation which is under the diffusion controlling regime takes place continuously from the skin to the core of the fiber.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.993-999
• /
• 2011

The photoreactive prepolymers with multifunctional cinnamate and bisphenol Atype cinnamate groups that could perform photodimerization without photoinitiators were synthesized by the reaction of t-cinnamic acids (CAs) and epoxy resins. Their photocure reaction rates and the extent of reaction conversion were measured with Fourier transform infrared spectroscopy, and these increased with the intensity of UVirradiation. The experimental data of these reaction rates showed the characteristics of nth-order kinetics reaction, and all kinetic constants of each photoreactive polymer with this equation were summarized. Although the GTR-1800-HCA and KWG1-EP-HCA with hydroxyl group substituted cinnamate showed lower reaction conversion rates and rate constant than GTR-1800-CA and KWG1-EP-CAwith an unsubstituted cinnamate group, GTR-1800-MCAand KWG1-EP-MCAwith methoxy group substituted cinnamate showed similar and higher reaction conversion rates than the former, respectively. These results were explained in terms of segmental mobility for photopolymerization by molecular interactions.

• 정보처리학회논문지D
• /
• 제17D권5호
• /
• pp.327-336
• /
• 2010

본 논문은 기능점수 소프트웨어 규모에 기반하여 개발노력과 일정과의 관계를 유도하는 소프트웨어 공식을 제안하였다. 기존의 소프트웨어 공식은 라인수에 기반을 두고 있다. 라인수는 개발언어에 따라 큰 차이를 보여 소프트웨어 규모 추정에 어려움이 많이 지적되고 있다. 먼저 라인수를 기능점수로 변환하는 방법을 고려하였다. 그러나 이 방법은 개발언어별로 라인수와 기능점수간 변환비율이 명확히 결정되지 않고 있고, 또한 특정 개발언어에 대해서는 변환비율이 제시되어 있지 않아 소프트웨어 공식을 유도하는데 실패하였다. 따라서 기능점수에 기반하여 개발된 대용량의 프로젝트 데이터를 대상으로 소프트웨어 공식을 직접 유도하였다. 첫 번째로 개발 프로젝트들 중에서 타당한 개발기간이 설정된 데이터들을 분류하였다. 두 번째로, 이 데이터에 대해 회귀분석을 통해 기능점수와 개발노력, 기능점수와 개발기간과의 관계를 유도하였다. 마지막으로 이들 관계로부터 소프트웨어 공식을 유도하였다. 제안된 모델은 라인수 기반의 모델이 갖고 있는 적용상 문제점들을 해결하여 실무에 쉽게 적용이 가능한 장점을 갖고 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.517-520
• /
• 2000

This paper presents models considering the magnetic nonlinear characteristics of 8/6 Switched Reluctance Motor. A $\lambda$-i equation with Fourier series parameters is shown to represent the relating to flux-linkage and current appropriately at any rotor position. And the energy conversion loop is described.